4926.  The market shares of small and medium scaled enterprises in Taiwan manufacturers

胡名雯; Hu, Ming-wen ,  1996-07
[Graduate Institute & Department of Industrial Economics] Journal Article
The Asian economic journal 10(2), pp.117-131
for the outstanding performance of its SMEs. Limited knowledge about the causes of such performance has been revealed gradually. The main purpose of this study

4927.  The impact of assessment program on the nursing home market-the lesson from the illinois state

郝充仁 ,  1996-07
[Graduate Institute & Department of Insurance Insurance] Journal Article
經濟研究 34(2)，頁201-231
to assessment program. The empirical study supports the hypothesis. The total impact of the assessment program increases private pay patient price, decreases

4928.  Electroless copper sulfide deposition on the polyacrylonitrile films with chelating agents and its EMI shielding effectiveness

陳幹男 ,  2009-08-01
[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article
Macromol. Symposia.286, pp.116-264
In this study, an effective deposition of copper sulfide (Cux(x = 1,2)S) on the PAN film was proposed by an electroless deposition method with the reduction

4929.  Theoretical Investigation of Organic Amines as Hole Transporting Materials: Correlation to the Hammett Parameter of the Substituent, Ionization Potential, and Reorganization Energy Level

Pan, Jiunn-hung; Chou, Yu-ma; Chiu, Houn-lin; Wang, Bo-cheng ,  2009-05
[Graduate Institute & Department of Chemistry] Journal Article
Australian Journal of Chemistry 62(5), pp.483-492
(PC), and their derivatives, are found to be related to their Hammett parameter (σ). In this study, the density functional theory (DFT) calculation

4930.  Effects of Interface Workload In-Vehicle Information Systems on Driving Safety

Chen, Wan-hui; Lin, Chih-yung; Doong, Ji-ling ,  2005-12
[Graduate Institute & Department of Transportation Management] Journal Article
Transportation Research Record: Journal of the Transportation Research Board 1937, pp.73-78
is always an important issue. This study investigates the effects of auditory ICWS messages on driver performance while the driver's visual, hearing

4931.  Lossless data compression studies for the geostationary imaging Fourier transform spectrometer (GIFTS) with the bias-adjusted reordering preprocessing

Huang, Bormin; Wei, Shih-chieh; Huang, Allen H.-L.; Smuga-Otto, Maciek; Knuteson, Robert; Revercomb, Henry E.; Smith, William L. ,  2007-08
[Graduate Institute & Department of Information Management] Proceeding
Proceedings SPIE V. 6683
assessment. In this paper we will study lossless compression of GIFTS data that has been collected as part of the calibration or Ground Based Tests

4932.  Dynamic fracture analysis of a finite crack subjected to an incident horizontally polarized shear wave

應宜雄; Ing, Yi-shyong; Ma, Chien-ching ,  1997-03-01
[Graduate Institute & Department of Aerospace Engineering] Journal Article
International journal of solids and structures 34(8), pp.895-910
solid is investigated in this study. In analyzing this problem, an infinite number of diffracted waves generated by two crack tips must be taken

4933.  Heat Transfer Characteristics of Gaseous Flow in Long Mini- and Microtubes

Chen, Ching-shung; Kuo, W.J. ,  2004-09
[Graduate Institute & Department of Aerospace Engineering] Journal Article
Numerical Heat Transfer, Part A 46(5), pp.497-514
procedure which solves the compressible boundary-layer equations is used to study the heat transfer characteristics of gaseous laminar and turbulent

4934.  Overseas Listing and Accounting Conservatism: Evidence from Chinese H-share Companies

Kung, Fan-Hua; James, Kieran; Cheng, Chia-Ling ,  2011-09-20
[Graduate Institute & Department of Accounting] Journal Article
Asian Review of Accounting,19(3),p.266-278
significant in the 2006 to 2008 sub-period. Originality/value – The evidence in this study shows that differences in earnings conservatism arise from

4935.  Using Statistical Data and Signed Distance of Fuzzy Aggregate Evaluation Method on Application of Measuring Service Quality of Hotel

Huang, Tien-tsai; Huang, Wen-tao ,  2005-09
[Department of Management Sciences] Journal Article
International Journal of Information and Management Sciences 16(3), pp.17-35
factor in hotel industrial survival and development. Recently, many literatures focus on evaluation of service quality on hotel industry and they use

4936.  A Fuzzy Hierarchy Integral Analytic Expert Decision Process in Evaluating Foreign Investment Entry-mode Selection for Taiwanese Bio-tech Firms

李旭華 ,  2011-03
[Department of Management Sciences] Journal Article
Expert System With Applications 38(4), pp.3304-3322
of this study is to help bio-tech firms solve the foreign investment (FI) entry mode selection problem. This study combines the concepts of factor analysis

4937.  Mining customer knowledge to implement online shopping and home delivery for hypermarkets

Liao, Shu-Hsien; Chen, Yin-Ju; Lin, Yi-Tsun ,  2011-04
[Department of Management Sciences] Journal Article
Expert Systems with Applications 38(4), pp.3982–3991
, this study combines online shopping and home delivery, and attempts to use association rules to determine unknown bundling of fresh products and non-fresh

4938.  The Impacts of Warrants Issuance on the Price and Trading Volumes of the Underlying Stock: The Call Warrants Case of Taiwan Stock Exchange

Chuang, Chung-chu; Chuang, Shuo-li ,  2005-03
[Department of Management Sciences] Journal Article
International Journal of Information and Management Sciences 16(1), pp.17-34
/Information Leakage Effect; Event Study Method This paper is to investigate the impacts of derivative warrants issuance from January, 1997 to April

4939.  Relationships between Knowledge Inertia, Organizational Learning and Organization Innovation

廖述賢; Fei, W. C.; Liu, C. T. ,  2008-04
[Department of Management Sciences] Journal Article
Technovation28(4), pp.183-195
strategy is termed "knowledge inertia". This study aims to establish the constructs of knowledge inertia and examine the relationships between knowledge

4940.  Exploring TQM-Innovation relationship in continuing education: A system architecture and propositions

Liao, Shu-Hsien; Chang, Wen-Jung; Wu, Chi-Chuan ,  2010-11
[Department of Management Sciences] Journal Article
Total Quality Management & Business Excellence 21(11), pp.1121-1139
and propositions TQM; innovation; strategic management; continuing education; system architecture; university; case study Total quality management (TQM) has

4941.  Cobalt oxide nanosheet and CNT micro carbon monoxide sensor integrated with readout circuit on chip

Dai, Ching-liang; Chen, Yen-chi; Wu, Chyan-chyi; Kuo, Chin-fu ,  2010-04
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Sensors 10(3), pp.1753-1764
sensor integrated with readout circuit on chip Basel: MDPI AG micro carbon monoxide sensor; cobalt oxide film; readout circuit The study presents a micro

4942.  Design of Protective Coatings for Glass Lens Molding

Ma, Kung Jeng; Chien, H.H.; Chuan, W.H.; Chao, Choung Lii; Hwang, K.C. ,  2007-12
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Key Engineering Materials 364-366, pp.655-661
in this study. The influence of operation temperature, ambient gas, substrate materials, and thin film composition on wettability of glass at high temperature

4943.  Development of a Non-contact Measurement System for In-situ Tool Profile Monitoring

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-11
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
J. of C.C.I.T 35(1)
material for cutting precision diffractive optical elements, aspheric metal optical components etc. As long as tools are in use, it is only the matter

4944.  Development of a Non-contact Tool Setting System for Precision Diamond Turning

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-01
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Materials Science Forum 505-507, pp.367-372
-contact precision tool setting system is developed and built in this study using edge-detection image processing and sub-pixel dividing techniques

4945.  Influence of Inertia and Dissipative Forces on the Dynamic Response of Poroelastic Materials

Tsay,H.-S.; H. B. Kingsbury ,  1992-01-01
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Int. J. Solids Structures29(5), pp.641-652
boundary conditions on the solutions to these equations and presents a systematic study of the effect of the dissipation term of Biot's theory on the system

4946.  Research on Fabricating CVD Diamond Microstructures Using RIE Process

Chou, Wen-chen; Chao, Choung-lii; Fan, Wei-haw; Ma, Kung-jeng ,  2009-02
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article, [Graduate Institute & Department of Computer Science and Information Engineering] Journal Article
Key Engineering Materials 407-408, pp.41-44
. The scanning electron microscope (SEM), transmission electron microscope (TEM) and micro-Raman spectroscopy were used to study the surface morphology and sub

4947.  Preparation of polymer/silica hybrid hard coatings with enhanced hydrophobicity on plastic substrates

Chang, Chao-Ching; Oyang, Tai-Yueh; Hwang, Feng-Hsi; Chen, Ching-Chung; Cheng, Liao-Ping ,  2012-01
[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article
Journal of Non-Crystalline Solids 358(1), pp.72–76
-curing; Plastic substrate; Hydrophobicity In this study, an easy method to increase hydrophobicity of the polymer/silica hybrid coating was demonstrated

4948.  Heat-Transfer Efficiency Improvement of Double-Pass Concentric Circular Heat Exchangers under Uniform Wall Fluxes

Ho, Chii-dong; Tu, Jr-wei; Yeh, Shih-cheng; Guo, Jia-jan ,  2008-08-01
[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article
Int. Comm. Heat Mass Transfer 35(7), pp.828-832
recycle was also discussed in this study. (C) 2008 Elsevier Ltd. All rights reserved. 2008-08-01 en Int. Comm. Heat Mass Transfer 35(7), pp.828-832

4949.  CFD simulation of the two-phase flow for a falling film microreactor

Ho, Chii-Dong; Chang, Hsuan; Chen, Hsi-Jen; Chang, Cheng-Liang; Li, Hsieh-Hsung; Chang, Yin-Yu ,  2011-07-01
[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article
International Journal of Heat and Mass Transfer 54(15-16), pp.3740-3748
, pressure and shear stress profiles, are analyzed. 2-D simulation is adopted for the study of the relationship of liquid flow rate and film thickness

4950.  線上購物滿意度與偏好之研究─SERVQUAL Model 觀點

張俊惠; 林柏宏; 梁莉詩 ,  2005-04
[Graduate Institute & Department of International Business] Proceeding
第二屆海峽兩岸企業理論與實務學術研討會論文集，頁61-74
淡江大學國際企業學系 張俊惠 林柏宏 梁莉詩 線上購物滿意度與偏好之研究─SERVQUAL Model 觀點 The Study of On-line Shopping Satisfaction and Preference─The SERVQUAL Model Perspective 臺北縣