15051.  A power control mechanism based on sleep scheduling for wireless sensor networks

游進湧; Yu, Chin-yung ,  2009
[資訊工程學系暨研究所] 學位論文
“A performance study of DSDV-based CLUSTERPOW and DSDV routing algorithms for network applications”;Wireless Pervasive Computing, 2006 1st International

15052.  A study on content-based image retrieval

高楊達; Kao, Yang-ta ,  2006
[資訊工程學系暨研究所] 學位論文
淡江大學資訊工程學系博士班 林慧珍; Lin, Hwei-jen 高楊達 Kao, Yang-ta A study on content-based image retrieval 以內容為基礎之影像查詢研究 影像內容查詢;爬山式序列表示法;爬山式序列及交叉點表示法;邊緣偵測;分支及黏合;方向及

15053.  超互動式自律學習系統之設計、製作及實驗探討

洪振榮; Hung, Chen-jung ,  2006
[資訊工程學系暨研究所] 學位論文
, implementation, and trial study 遠距教學;電子化教學;學習管理系統;自律學習;自律學習循環模式;鷹架式輔助學習;Distance learning;e-learning;learning management system (LMS);self-regulated learning

15054.  The research of information-based warrior

王貴民; Wang, Kuei-min ,  2005
[資訊工程學系暨研究所] 學位論文
some mathematic view to the model, the model would be a way to see the value of IBW. Fourth, develop an experiment that use of “scenario based

15055.  遊戲式學習環境暨教學資源編輯系統實作-以棒球卡片遊戲為例

余孟良; Yu, Meng-liang ,  2008
[資訊工程學系暨研究所] 學位論文
of this study was to design and implement a game-based learning system, including a two-player contest system, by integrating four sub-systems

15056.  知識管理之萃取與建構研究

施震偉; Shih, Chen-wei ,  2006
[資訊工程學系暨研究所] 學位論文
,pp.293-315. 32.Cohen,Michael D., and Bacdayan, Paul(1990), "Organizational Routines Are Stored as Procedural Memory：Evidence from a Laboratory Study

15057.  使用混合特徵選取於蛋白質結晶預測

葉致遠; Yeh, Jr-yuan ,  2009
[資訊工程學系暨研究所] 學位論文
. Therefore, it is important to find out the structures of proteins. Nowadays, scientists usually use X-ray diffraction or Nuclear Magnetic Resonance (NMR

15058.  迴路式虹吸熱管之增強沸騰結構

謝志昇; Hsieh, Chih-sheng ,  2006
[機械與機電工程學系暨研究所] 學位論文
] Min-Kyun Na, Jin-Seok Jeon, Ho-Young Kwak and Sang-Sig Nam,” Experimental Study on Closed-Loop Two-Phase Thermosyphon Devices for Cooling MCMs, ” Heat

15059.  反應離子蝕刻加工化學氣相沈積鑽石薄膜之研究

黃帥文; Huang, Shuai-wen ,  2005
[機械與機電工程學系暨研究所] 學位論文
to be machined. In the present study, The microwave CVD method was employed to produce diamond films. The underlying material removal mechanisms, microstructure

15060.  銀奈米流體應用於震盪式熱管效能之研究

陳慧倫; Chen, Hui-lun ,  2006
[機械與機電工程學系暨研究所] 學位論文
diameter with 2.4 mm and 3 mm respectively to carry out the experimental pulsating heat pipe. In order to study and measure the efficiency, we compare

15061.  低驅動電壓之熱致動微元件

林岳正; Lin, Yue-jheng ,  2007
[機械與機電工程學系暨研究所] 學位論文
micro actuators working in the appropriate temperature. This study chooses parylene as major materials and successfully fabricates a novel diaphragm

15062.  應用動態有限元素法於金屬板材擴孔製程之裂縫成長分析

周漢傑; Jhou, Han-jie ,  2009
[機械與機電工程學系暨研究所] 學位論文
analysis, this study designed a die set without draw bead to carry out the experiments of bore-expending process for the blanks with initial hole

15063.  電漿滲氮處理對鋼材之鑽石車削性及刀具磨耗影響之研究

張家榮; Chang, Chia-jung ,  2007
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 張家榮 Chang, Chia-jung 電漿滲氮處理對鋼材之鑽石車削性及刀具磨耗影響之研究 Study of the machinability and tool wear mechanisms involved

15064.  具奈米牛頓解析度之互補式金氧半力感測器之研究

廖威豪; Liao, Wei-hao ,  2007
[機械與機電工程學系暨研究所] 學位論文
integrated circuit foundry, TSMC 0.35um 2P4M process herein, is provided by CIC (Chip Implementation Center), Taiwan. In this research, we use silicon

15065.  精密輪磨加工硬脆材料中加工參數對表面性狀之影響研究

趙展毅; Chao, Chan-yi ,  2009
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 趙展毅 Chao, Chan-yi 精密輪磨加工硬脆材料中加工參數對表面性狀之影響研究 Study on the influence of grinding conditions on the surface

15066.  應用移動漸近線法於有限元素的最佳化設計

陳匡佑; Chen, Kuang-yu ,  2007
[機械與機電工程學系暨研究所] 學位論文
optimization case study". Int.J . Numer.Meth. Engrg. Vol.48, pp.1151-1164,(2000) [11]Svanberg, K., "The method of moving asymptotes–a new method

15067.  以常壓空氣電漿及反應離子蝕刻製作鑽石微結構之研究

林夏蓁; Lin, Hsia-chen ,  2007
[機械與機電工程學系暨研究所] 學位論文
technology. This study not only indicated the producing mechanism of these microstructures on CVD diamond grains by atmospheric pressure air plasma

15068.  微流道毛細填充流動之理論與實驗研究

陳冠宇; Chen, Kuan-yu ,  2007
[機械與機電工程學系暨研究所] 學位論文
, and viscosity for laminar flow in parylene channels by using the incompressible Navier–Stokes equation. Further, the study use dimensionless analysis

15069.  蒸汽腔體均熱片之數值分析

洪裕勛; Hung, Yu-hsun ,  2005
[機械與機電工程學系暨研究所] 學位論文
積的比較中，因加熱面積小造成熱量集中，溫度分佈較不均勻。在散熱面的溫度分佈上可觀察到，蒸汽腔體除了能用於帶走熱量，作為熱傳遞的媒介之外，還能有效地將熱量均勻帶至散熱面，藉由散熱模組散熱，提高散熱效益。 The study investigates thermal performance

15070.  微小圓杯引伸成形分析與料片最佳化之研究

陳世傑; Chen, Shih-chieh ,  2006
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 葉豐輝; Yeh, Fung-huei 陳世傑 Chen, Shih-chieh 微小圓杯引伸成形分析與料片最佳化之研究 Study of formability analysis in cylindrical micro cup drawing

15071.  四節機器人之研究

張昱升; Chang, Yu-seng ,  2005
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 楊智旭; Yang, Jr-syu 張昱升 Chang, Yu-seng 四節機器人之研究 Study of a four-link robot 四節機器人;模糊控制;零力矩點(ZMP);類神經網路(ANN);Four-Link Robot;Fuzzy

15072.  Design and analysis of actuators for Chinese braille display

梁世豪; Liang, Shih-hao ,  2007
[機械與機電工程學系暨研究所] 學位論文
parameters, including supplied voltage and clamped position, to obtain the sufficient thrust force and Braille dot height. The study shows

15073.  拉伸應變及應力回復對聚二甲基矽氧烷鍍金之漣漪型態影響

楊文華; Yang, Wen-hua ,  2005
[機械與機電工程學系暨研究所] 學位論文
structure. The study also probed into the effect of tensile strain, thickness of gold film and strain release on wavelength and amplitude of the ripple

15074.  應用有限元素頻域法於室內聲響特性之預測

李志徹; Li, Chih-che ,  2009
[機械與機電工程學系暨研究所] 學位論文
吻合。 In this study, Biot''s poroelastic dynamic equations were applied to analyze the dynamic stiffness and the sound absorption coefficient

15075.  應用有限元素頻域法於含飽和液體多孔薄板之彎曲振動分析

陳央澤; Chen, Yang-ze ,  2009
[機械與機電工程學系暨研究所] 學位論文
無因次材料參數的影響大致可分為起始振幅、模態振幅及模態頻率三大部份。 In this study, Biot''s poroelastic theory is used to derive the governing equations of flexural vibration of thin