61.  Topological optimum design of a compliant mechanism for planar optical modulator

Lin, C. F; Shih, C. J. ,  2002-09-01
[機械與機電工程學系暨研究所] 期刊論文
淡江理工學刊=Tamkang journal of science and engineering 5(3), pp.151-158
; Compliant Mechanism; Structural Optimization; Micro-Electro Mechanical Structure; Engineering Design; Computer-Aided Design The rotator type of optical

62.  Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

楊勝明; Yang, Sheng-ming; 林逢傑; Lin, Feng-chieh; Chen, Ming-tsung ,  2004-09
[機械與機電工程學系暨研究所] 期刊論文
IEEE Transactions on Industry Applications 40(5), pp.1257-1264
淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming 林逢傑 Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase

63.  Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

楊勝明; Yang, Sheng-ming; Lin, Feng-chieh; Chen, Ming-tsung ,  2003-10-14
[機械與機電工程學系暨研究所] 會議論文
Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the (Volume:1 ), pp.473-479
淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase VSI

64.  微切削之毛邊形成機制之探討

賴炳宏; Lai, Ping-hung ,  2010
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 賴炳宏 Lai, Ping-hung 微切削之毛邊形成機制之探討 Study on burr formation in micro-cutting process 精密元件;微切削;毛邊;Precision

65.  模擬軟體TUUSIM於TUUSAT-1A微衛星驗證與應用

汪揚名; Wang, Yang-ming ,  2010
[機械與機電工程學系暨研究所] 學位論文
of TUUSAT-1A 微衛星;模擬器;系統設計;Micro-satellite;Simulator;system design 本文主要是針對TUUSAT-1A微衛星之細部設計，使用系統驗證軟體TUUSIM(TUUSAT-1A SIMulator)對任務各個子系統做模擬分析。由

66.  Micro Fuse Fabrication and Testing

康尚文; Kang, Shung-wen; Chen, Yu-tang; 許欽淳; Hsu, Chin-chun; 林俊偉; Lin, Jun-wei ,  2007-06
[機械與機電工程學系暨研究所] 期刊論文
淡江理工學刊=Tamkang journal of science and engineering 10(2)，頁173-176
淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen Chen, Yu-tang 許欽淳 Hsu, Chin-chun 林俊偉 Lin, Jun-wei Micro Fuse Fabrication and Testing 臺北縣：淡江大學 Micro copper fuse

67.  The manufacture and test of (110) orientated silicon based micro heat exchanger

康尚文; Kang, Shung-wen; 張廣祥; Chang, Guang-shang; Chen, Yu-Tang ,  2002-09
[機械與機電工程學系暨研究所] 期刊論文
淡江理工學刊=Tamkang journal of science and engineering 5(3)，頁129-136
淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen 張廣祥 Chang, Guang-shang Chen, Yu-Tang The manufacture and test of (110) orientated silicon based micro heat

68.  Weight Reduction of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining

Yang, Lung-Jieh; Hsu, Cheng-Kuei; Kao, Chung-Yu; Hsiao, Fu-Yuen; Feng, Chao-Kung ,  2009-09
[機械與機電工程學系暨研究所] 期刊論文
Journal of Aeronautics, Astronautics and Aviation Series A 41(3), pp.165-172
of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining 利用放電線切割加工進行拍翼式飛行器之減重 桃園縣：中華民國航空太空學會 Micro aerial vehicle(MAV); Flapping; Electrical

69.  Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle

Yang, Lung-jieh; Hsu, Cheng-kuei; Ho, Jen-yang; Feng, Chao-kang ,  2007-04-09
[航空太空工程學系暨研究所] 期刊論文
Sensors and Actuators A: Physical 139(1-2), pp.95-103
of a micro aerial vehicle 以具壓電感測器之拍翼改善微飛行器之空氣動力 Lausanne: Elsevier MAV (micro aerial vehicle); Flapping wing; Parylene; On-site lift; PVDF (polyvinyliden

70.  Micro-viscometer based on electrowetting on dielectric

Lin, Yan-you; Lin, Chi-wann; 楊龍杰; Yang, Lung-jieh; Wang, An-bang ,  2007-02-10
[機械與機電工程學系暨研究所] 期刊論文
Electrochimica Acta 52(8), pp.2876-2883
淡江大學機械與機電工程學系 Lin, Yan-you Lin, Chi-wann 楊龍杰 Yang, Lung-jieh Wang, An-bang Micro-viscometer based on electrowetting on dielectric Elsevier

71.  拍翼式飛行器之微小化改良

陳羿韶; Chen, Yi-Shao ,  2011
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 楊龍杰 陳羿韶 Chen, Yi-Shao 拍翼式飛行器之微小化改良 The improvement on the miniaturization of flapping micro aerial vehicles 微飛行器;拍翼;微小化;Micro

72.  Micro-Cap在數值分析上的應用

呂墩棖; Lu, Tun-Chang ,  2011
[電機工程學系暨研究所] 學位論文
淡江大學電機工程學系碩士班 余繁 呂墩棖 Lu, Tun-Chang Micro-Cap在數值分析上的應用 The application of micro-cap in numerical analysis 微分方程式;線性;非線性;Micro-Cap;Numerical analysis

73.  The micro-air-vehicle Golden Snitch and its figure-of-8 flapping

Yang, Lung-Jieh ,  2012-09
[機械與機電工程學系暨研究所] 期刊論文
淡江理工學刊 15(3), p.197-212
淡江大學機械與機電工程學系 Yang, Lung-Jieh Yang, Lung-Jieh The micro-air-vehicle Golden Snitch and its figure-of-8 flapping 淡江大學 Figure-of-8;Micro-Air-Vehicle

74.  Design and fabrication of light weight current collectors for direct methanol fuel cells using the micro-electro mechanical system technique

Sung, Min-Feng; Kuan, Yean-Der; Chen, Bing-Xian; Lee, Shi-Min ,  2011-07
[航空太空工程學系暨研究所] 期刊論文
Journal of Power Sources 196(14), pp.5897-5902
for direct methanol fuel cells using the micro-electro mechanical system technique Lausanne: Elsevier S.A. Direct methanol fuel cell; Thermal evaporation

75.  Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted Blades

Chen, T. Y.; Hung, C. W.; Liao, Y. T. ,  2013-09-01
[航空太空工程學系暨研究所] 期刊論文
Journal of Mechanics 29(3), pp.N15-N20
淡江大學航空太空工程學系 Chen, T. Y. Hung, C. W. Liao, Y. T. Chen, T. Y. Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted

76.  The Analytical and Numerical Solutions for Gaseous Slip Flows in Micro-Channels

陳慶祥; Chen, C. S. ,  2000-03
[航空太空工程學系暨研究所] 期刊論文
Journal of the Chinese Institute of Engineers=中國工程學刊 23(2), pp.229-235
淡江大學航空太空工程學系 陳慶祥 Chen, C. S. The Analytical and Numerical Solutions for Gaseous Slip Flows in Micro-Channels 微流道內之滑動氣體流場探討 Taipei : Chinese

77.  Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle

Yang, Lung-Jieh; Hsu, Cheng-Kuei; Ho, Jen-Yang; Feng, Chao-Kang ,  2007-04-09
[機械與機電工程學系暨研究所] 期刊論文
Sensors and Actuators, A: Physical 139(1-2 SPEC. ISS.), pp.95-103
the aerodynamic forces of a micro aerial vehicle Lausanne: Elsevier S.A. MAV (micro aerial vehicle);Flapping wing;Parylene;On-site lift;PVDF (polyvinyliden fluoride

78.  3D Flapping Trajectory of a Micro-Air-Vehicle and its Application to Unsteady Flow Simulation

Yang, Lung-Jieh; Hsiao, Fu-Yuen; Tang, Wen-Tzu; Huang, I-Cheng ,  2013-01
[機械與機電工程學系暨研究所] 期刊論文
International Journal of Advanced Robotic Systems 2013(10), 264(11pages)
淡江大學機械與機電工程學系 Yang, Lung-Jieh Hsiao, Fu-Yuen Tang, Wen-Tzu Huang, I-Cheng Yang, Lung-Jieh 3D Flapping Trajectory of a Micro-Air-Vehicle and its

79.  Steel-based bionic actuators for flapping microair-vehicles

Yang, Lung-Jieh; Jan, Dung-Lin; Lin, Wei-Chung ,  2013-10
[機械與機電工程學系暨研究所] 期刊論文
Micro & Nano Letters 8(10), pp.686-690
: The Institution of Engineering and Technology steel foil; tail actuator; laser cutting; flapping micro-air-vehicles; FMAVs This Letter presents

80.  鑽石車削中刀具磨耗及切削參數對切屑及毛邊形成之影響

游文宏; Yu, Wen-Hung ,  2013
[機械與機電工程學系暨研究所] 學位論文
formation in diamond turning 模擬分析;微切削;鑽石車削;simulation;micro-cutting;Diamond turning 　　由於光學和光電產業的快速發展，對具微結構之組件及模具之需求均大量增加。目前雖有許多方法可用以產出這些微結構，但精密鑽石車削迄今

81.  可撓機翼架構誘導之仿生八字形拍翼

徐振貴; 施宏明; 楊龍杰 ,  2007-11
[機械與機電工程學系暨研究所] 會議論文
2007中華民國航空太空學會第四十九屆航太學術研討會論文集，6頁
淡江大學機械與機電工程學系 徐振貴 施宏明 楊龍杰 可撓機翼架構誘導之仿生八字形拍翼 A Biomimic Figure-Eight Flapping Induced by Flexible Wing Frames 拍翼;微飛行器;八字形;Flapping;Micro aerial

82.  Band Gap Engineering of Chemical Vapor Deposited Graphene by in Situ BN Doping

Chang, Cheng-Kai; Satender Kataria; Kuo, Chun-Chiang; Abhijit Ganguly; Wang, Bo-Yao; Hwang, Jeong-Yuan; Huang, Kay-Jay; Yang, Wei-Hsun; Wang, Sheng-Bo; Chuang, Cheng-Hao; Chen, Mi; Huang, Ching-I; Pong, Way-Faung; Song, Ker-Jar; Chang, Shoou-Jinn; Guo, Jing-Hua; Tai, Yian; Masahiko Tsujimoto; Seiji Isoda; Chen, Chun-Wei; Chen, Li-Chyong; Chen, Kuei-Hsien ,  2013-02-01
[物理學系暨研究所] 期刊論文
ACS Nano 7(2), p.1333–1341
Society band gap;BN doping;chemical vapor deposition;graphene;micro-Raman;XAS-XES;XPS Band gap opening and engineering is one of the high priority goals

83.  2D quasi-steady flow simulation of an actual flapping wing

Yang, Lung Jieh; Huang, H.-L.; Liou, J.-C.; B. Esakki; U. Chandrasekhar ,  2014-05
[機械與機電工程學系暨研究所] 期刊論文
Journal of Unmanned System Technology 2(1), p.10-16
Seoul: UNSYSdigital Flapping;micro-air-vehicle (MAV);stereo photography;computation fluid dynamics (CFD);quasi-steady. This paper deals about the dynamic

84.  利用微藻MBR系統處理污水同時產製生質能源並回收再生水之研究

高思懷 ,  2013-01
[水資源及環境工程學系暨研究所] 研究報告
of renewable water by microalgae MBR system micro-algae; bio-energy; sewerage treatment; MBR; algae-water separation; membrane fouling 2013-01 zh_TW 行政院國家科學委員會

85.  Development Scenario of Micro Ornithopters

Lung-Jieh Yang; Suseendar Marimuthu; Kuan-Cheng Hung; Hao-Hsiang Ke; Yow-Ting Lin; Chien-Wei Chen ,  2015-12
[機械與機電工程學系暨研究所] 期刊論文
Journal of Aeronautics, Astronautics and Aviation 47(4), p.397-406
Lung-Jieh Yang Suseendar Marimuthu Kuan-Cheng Hung Hao-Hsiang Ke Yow-Ting Lin Chien-Wei Chen Development Scenario of Micro Ornithopters 中華民國航太學會