English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64178/96951 (66%)
造訪人次 : 9305721      線上人數 : 250
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    類別瀏覽

    正在載入社群分類, 請稍候....

    作者瀏覽

    正在載入作者分類, 請稍候...

    年代瀏覽

    正在載入年代分類, 請稍候....

    結果 51-100 / 2970.

    上一頁1 2 3 4 5 6 7 8 9 10 11 下一頁    每頁顯示[10|25|50]項目
    [ 只搜尋有全文項目| 搜尋所有項目]     排序欄位 順序

    51The Zeroth Order Solution of the Velocity Field around Micro Comb Structures with Lateral Oscillation

    李其源; Lee, Chi-yuan; 2002-01
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of the Chinese Institute of Engineers=中國工程學刊 25(1), pp.57-65
    淡江大學機械與機電工程學系 李其源 Lee, Chi-yuan 楊龍杰 Yang, Lung-jieh 陳炳煇 Chen, Ping-hei The Zeroth Order Solution of the Velocity Field around Micro Comb Structures

    52微梳狀結構之滑動黏滯及擠壓效應之數值研究

    陳慶祥2004-12
    [航空太空工程學系暨研究所] 會議論文
    中國航空太空學會第四十六屆年會暨會員大會、2004航太學會/民航學會聯合學術研討會、國科會航太學門專題研究計畫成果發表會、教育部航太科技教育改進計畫成果發表會論文集,8頁
    淡江大學航空太空工程學系 陳慶祥 Chen, Ching-Shung 微梳狀結構之滑動黏滯及擠壓效應之數值研究 Numerical Study of Slip, Viscous and Squeezing Effects on Micro Comb Drives 微梳狀制動器;微梳狀結構;擠壓阻

    53微冷卻器之整合研究-總計畫(III)

    康尚文; 杜文謙; 2001
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 康尚文 杜文謙 楊龍杰 微冷卻器之整合研究-總計畫(III) Integrated Research on Micro Coolers(III) 微冷卻器;整合研究;Micro cooler;Integrated research 2001 行政院國家科學委員會

    54微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III)

    康尚文2001
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 康尚文 微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III) The Study on Packaging and Testing of Micro Coolers(III) 封裝;測試;微冷卻器;Packaging;Testing;Micro

    55微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III)

    杜文謙2001
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III) The Study on Thermal and Fluid Technology of Micro Coolers(III) 熱流;微冷卻器;Thermal fluid technology

    56TUUSAT-1A微衛星系統功能模擬驗證軟體整合與分析

    王裕淵; Wang, Yu-yuan2008
    [機械與機電工程學系暨研究所] 學位論文
    for micro-satellite, TUUSAT-1A 微衛星;模擬器;系統設計;Micro-satellite;Simulator;system design 本文主要是針對TUUSAT-1A微衛星之細部設計,使用系統驗證軟體TUUSIM(TUUSAT-1A SIMulator)對任務做模擬分析

    57TUUSAT-1A微衛星熱控系統設計與分析

    李世維; Li, Shih-wei2007
    [機械與機電工程學系暨研究所] 學位論文
    淡江大學機械與機電工程學系碩士班 洪祖昌; Hong, Zuu-chang 李世維 Li, Shih-wei TUUSAT-1A微衛星熱控系統設計與分析 The design and analysis of thermal control system for micro-satellite

    58具有完整資料傳遞與預充電時間形式之新型非同步控制電路

    蕭輔彥; Hsiao, Fu-yen2007
    [電機工程學系暨研究所] 學位論文
    and precharge-time scheme 非同步電路;開根號器;Asynchronous control;DCVSL;Micro-pipeline;Square root 在這篇論文裡,我們提出了一種可實行在非同步應用上的控制電路,叫做CDPC (Complete Data and Precharge

    59A new mobile payment scheme for roaming services

    Ren-junn Hwang; Sheng-hua Shiau; 2007
    [資訊工程學系暨研究所] 期刊論文
    Electronic Commerce Research and Applications 6(2), 頁184-191
    淡江大學資訊工程學系 Ren-junn Hwang Sheng-hua Shiau Ding-Far Jan A new mobile payment scheme for roaming services Elsevier Micro-payment; Mobile payment

    60Performance Testing of Micro Loop Heat Pipes

    Hsu, Chin-chun; 康尚文; 2005-06-01
    [機械與機電工程學系暨研究所] 期刊論文
    淡江理工學刊=Tamkang Journal of Science and Engineering 8(2), pp.123-132
    淡江大學機械與機電工程學系 Hsu, Chin-chun 康尚文 Kang, Shung-wen Hou, Tung-fu Performance Testing of Micro Loop Heat Pipes 淡江大學 Micro Loop Heat Pipes; Two Phase

    61Topological optimum design of a compliant mechanism for planar optical modulator

    Lin, C. F; Shih, C. J.2002-09-01
    [機械與機電工程學系暨研究所] 期刊論文
    淡江理工學刊=Tamkang journal of science and engineering 5(3), pp.151-158
    ; Compliant Mechanism; Structural Optimization; Micro-Electro Mechanical Structure; Engineering Design; Computer-Aided Design The rotator type of optical

    62Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

    楊勝明; Yang, Sheng-ming; 2004-09
    [機械與機電工程學系暨研究所] 期刊論文
    IEEE Transactions on Industry Applications 40(5), pp.1257-1264
    淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming 林逢傑 Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase

    63Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

    楊勝明; Yang, Sheng-ming; 2003-10-14
    [機械與機電工程學系暨研究所] 會議論文
    Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the (Volume:1 ), pp.473-479
    淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase VSI

    64微切削之毛邊形成機制之探討

    賴炳宏; Lai, Ping-hung2010
    [機械與機電工程學系暨研究所] 學位論文
    淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 賴炳宏 Lai, Ping-hung 微切削之毛邊形成機制之探討 Study on burr formation in micro-cutting process 精密元件;微切削;毛邊;Precision

    65模擬軟體TUUSIM於TUUSAT-1A微衛星驗證與應用

    汪揚名; Wang, Yang-ming2010
    [機械與機電工程學系暨研究所] 學位論文
    of TUUSAT-1A 微衛星;模擬器;系統設計;Micro-satellite;Simulator;system design 本文主要是針對TUUSAT-1A微衛星之細部設計,使用系統驗證軟體TUUSIM(TUUSAT-1A SIMulator)對任務各個子系統做模擬分析。由

    66Micro Fuse Fabrication and Testing

    康尚文; Kang, Shung-wen; 2007-06
    [機械與機電工程學系暨研究所] 期刊論文
    淡江理工學刊=Tamkang journal of science and engineering 10(2),頁173-176
    淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen Chen, Yu-tang 許欽淳 Hsu, Chin-chun 林俊偉 Lin, Jun-wei Micro Fuse Fabrication and Testing 臺北縣:淡江大學 Micro copper fuse

    67The manufacture and test of (110) orientated silicon based micro heat exchanger

    康尚文; Kang, Shung-wen; 2002-09
    [機械與機電工程學系暨研究所] 期刊論文
    淡江理工學刊=Tamkang journal of science and engineering 5(3),頁129-136
    淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen 張廣祥 Chang, Guang-shang Chen, Yu-Tang The manufacture and test of (110) orientated silicon based micro heat

    68Weight Reduction of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining

    Yang, Lung-Jieh; Hsu, Cheng-Kuei; 2009-09
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Aeronautics, Astronautics and Aviation Series A 41(3), pp.165-172
    of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining 利用放電線切割加工進行拍翼式飛行器之減重 桃園縣:中華民國航空太空學會 Micro aerial vehicle(MAV); Flapping; Electrical

    69Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle

    Yang, Lung-jieh; Hsu, Cheng-kuei; 2007-04-09
    [航空太空工程學系暨研究所] 期刊論文
    Sensors and Actuators A: Physical 139(1-2), pp.95-103
    of a micro aerial vehicle 以具壓電感測器之拍翼改善微飛行器之空氣動力 Lausanne: Elsevier MAV (micro aerial vehicle); Flapping wing; Parylene; On-site lift; PVDF (polyvinyliden

    70Micro-viscometer based on electrowetting on dielectric

    Lin, Yan-you; Lin, Chi-wann; 2007-02-10
    [機械與機電工程學系暨研究所] 期刊論文
    Electrochimica Acta 52(8), pp.2876-2883
    淡江大學機械與機電工程學系 Lin, Yan-you Lin, Chi-wann 楊龍杰 Yang, Lung-jieh Wang, An-bang Micro-viscometer based on electrowetting on dielectric Elsevier

    71拍翼式飛行器之微小化改良

    陳羿韶; Chen, Yi-Shao2011
    [機械與機電工程學系暨研究所] 學位論文
    淡江大學機械與機電工程學系碩士班 楊龍杰 陳羿韶 Chen, Yi-Shao 拍翼式飛行器之微小化改良 The improvement on the miniaturization of flapping micro aerial vehicles 微飛行器;拍翼;微小化;Micro

    72Micro-Cap在數值分析上的應用

    呂墩棖; Lu, Tun-Chang2011
    [電機工程學系暨研究所] 學位論文
    淡江大學電機工程學系碩士班 余繁 呂墩棖 Lu, Tun-Chang Micro-Cap在數值分析上的應用 The application of micro-cap in numerical analysis 微分方程式;線性;非線性;Micro-Cap;Numerical analysis

    73The micro-air-vehicle Golden Snitch and its figure-of-8 flapping

    Yang, Lung-Jieh2012-09
    [機械與機電工程學系暨研究所] 期刊論文
    淡江理工學刊 15(3), p.197-212
    淡江大學機械與機電工程學系 Yang, Lung-Jieh Yang, Lung-Jieh The micro-air-vehicle Golden Snitch and its figure-of-8 flapping 淡江大學 Figure-of-8;Micro-Air-Vehicle

    74Design and fabrication of light weight current collectors for direct methanol fuel cells using the micro-electro mechanical system technique

    Sung, Min-Feng; Kuan, Yean-Der; 2011-07
    [航空太空工程學系暨研究所] 期刊論文
    Journal of Power Sources 196(14), pp.5897-5902
    for direct methanol fuel cells using the micro-electro mechanical system technique Lausanne: Elsevier S.A. Direct methanol fuel cell; Thermal evaporation

    75Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted Blades

    Chen, T. Y.; Hung, C. W.; 2013-09-01
    [航空太空工程學系暨研究所] 期刊論文
    Journal of Mechanics 29(3), pp.N15-N20
    淡江大學航空太空工程學系 Chen, T. Y. Hung, C. W. Liao, Y. T. Chen, T. Y. Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted

    76The Analytical and Numerical Solutions for Gaseous Slip Flows in Micro-Channels

    陳慶祥; Chen, C. S.2000-03
    [航空太空工程學系暨研究所] 期刊論文
    Journal of the Chinese Institute of Engineers=中國工程學刊 23(2), pp.229-235
    淡江大學航空太空工程學系 陳慶祥 Chen, C. S. The Analytical and Numerical Solutions for Gaseous Slip Flows in Micro-Channels 微流道內之滑動氣體流場探討 Taipei : Chinese

    77Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle

    Yang, Lung-Jieh; Hsu, Cheng-Kuei; 2007-04-09
    [機械與機電工程學系暨研究所] 期刊論文
    Sensors and Actuators, A: Physical 139(1-2 SPEC. ISS.), pp.95-103
    the aerodynamic forces of a micro aerial vehicle Lausanne: Elsevier S.A. MAV (micro aerial vehicle);Flapping wing;Parylene;On-site lift;PVDF (polyvinyliden fluoride

    783D Flapping Trajectory of a Micro-Air-Vehicle and its Application to Unsteady Flow Simulation

    Yang, Lung-Jieh; Hsiao, Fu-Yuen; 2013-01
    [機械與機電工程學系暨研究所] 期刊論文
    International Journal of Advanced Robotic Systems 2013(10), 264(11pages)
    淡江大學機械與機電工程學系 Yang, Lung-Jieh Hsiao, Fu-Yuen Tang, Wen-Tzu Huang, I-Cheng Yang, Lung-Jieh 3D Flapping Trajectory of a Micro-Air-Vehicle and its

    79Steel-based bionic actuators for flapping microair-vehicles

    Yang, Lung-Jieh; Jan, Dung-Lin; 2013-10
    [機械與機電工程學系暨研究所] 期刊論文
    Micro & Nano Letters 8(10), pp.686-690
    : The Institution of Engineering and Technology steel foil; tail actuator; laser cutting; flapping micro-air-vehicles; FMAVs This Letter presents

    80鑽石車削中刀具磨耗及切削參數對切屑及毛邊形成之影響

    游文宏; Yu, Wen-Hung2013
    [機械與機電工程學系暨研究所] 學位論文
    formation in diamond turning 模擬分析;微切削;鑽石車削;simulation;micro-cutting;Diamond turning   由於光學和光電產業的快速發展,對具微結構之組件及模具之需求均大量增加。目前雖有許多方法可用以產出這些微結構,但精密鑽石車削迄今

    81可撓機翼架構誘導之仿生八字形拍翼

    徐振貴; 施宏明; 2007-11
    [機械與機電工程學系暨研究所] 會議論文
    2007中華民國航空太空學會第四十九屆航太學術研討會論文集,6頁
    淡江大學機械與機電工程學系 徐振貴 施宏明 楊龍杰 可撓機翼架構誘導之仿生八字形拍翼 A Biomimic Figure-Eight Flapping Induced by Flexible Wing Frames 拍翼;微飛行器;八字形;Flapping;Micro aerial

    832D quasi-steady flow simulation of an actual flapping wing

    Yang, Lung Jieh; Huang, H.-L.; 2014-05
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Unmanned System Technology 2(1), p.10-16
    Seoul: UNSYSdigital Flapping;micro-air-vehicle (MAV);stereo photography;computation fluid dynamics (CFD);quasi-steady. This paper deals about the dynamic

    84利用微藻MBR系統處理污水同時產製生質能源並回收再生水之研究

    高思懷2013-01
    [水資源及環境工程學系暨研究所] 研究報告
    of renewable water by microalgae MBR system micro-algae; bio-energy; sewerage treatment; MBR; algae-water separation; membrane fouling 2013-01 zh_TW 行政院國家科學委員會

    85Development Scenario of Micro Ornithopters

    Lung-Jieh Yang; Suseendar Marimuthu; 2015-12
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Aeronautics, Astronautics and Aviation 47(4), p.397-406
    Lung-Jieh Yang Suseendar Marimuthu Kuan-Cheng Hung Hao-Hsiang Ke Yow-Ting Lin Chien-Wei Chen Development Scenario of Micro Ornithopters 中華民國航太學會

    86Kinematic Analysis of a Flapping-wing Micro-aerial-vehicle with Watt Straight-line Linkage

    C.H. Liu; C-K Chen2015-12-30
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Applied Science and Engineering 18(4), pp.355-362
    C.H. Liu C-K Chen Kinematic Analysis of a Flapping-wing Micro-aerial-vehicle with Watt Straight-line Linkage Micro-aerial-vehicle;Forward Position

    87Arduino-based altitude and heading control of a flapping wing micro-air-vehicle

    Nikhil Panchal; Lung-Jieh Yang; 2017-12
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Unmanned Systems Technology 5(2), p.24-30
    wing micro-air-vehicle Altitude hold;barometer;directional flight;inertial measurement unit (IMU);flapping wing micro air vehicle (FWMAV) This paper

    88The Three-Dimensional Flow Simulation of a Flapping Wing

    Lung-Jieh Yang; Ai-Lien Feng; 2018-09
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Marine Science and Technology 26(3), p.297-308
    wing micro-air-vehicle (FWMAV);fluid-structure interaction (FSI);computational fluid dynamics (CFD);COMSOL Multiphysics This study investigates three

    89Numerical and Experimental Verifications on the Wing Design of a Flapping Wing Micro Air Vehicle

    Yang, Lung-Jieh2018-02-22
    [機械與機電工程學系暨研究所] 會議論文
    Proceeding of IDAD 2018
    Yang, Lung-Jieh Numerical and Experimental Verifications on the Wing Design of a Flapping Wing Micro Air Vehicle Ornithopter;Flapping Wing;Micro Air

    90超精密鑽石車削加工微光學結構製程中毛邊形成機制與抑制方法之研究

    林文忠; Lin, Wen-Chung2017
    [機械與機電工程學系暨研究所] 學位論文
    turning of various micro-optical structures Burr;chip;micro-cutting;Scratch;切屑;毛邊機制;刮痕;微切削 背光模組(back-light module)內的增亮膜((Brightness Enhancement Film, BEF)是

    91Quenching rate for a nonlocal problem arising in the micro-electro mechanical system

    Guo, Jong-Shenq; Hu, Bei2018-03
    [應用數學與數據科學學系] 期刊論文
    Journal of Differential Equations, 264, 3285- 3311
    Guo, Jong-Shenq Hu, Bei Quenching rate for a nonlocal problem arising in the micro-electro mechanical system Quenching;Micro-electro mechanical

    92Self-powered hybrid flexible nanogenerator and its application in bionic micro aerial vehicles

    Guowu Wei; Yaqi Bi; 2018-12
    [機械與機電工程學系暨研究所] 期刊論文
    Nano Energy 54, p.10-16
    nanogenerator and its application in bionic micro aerial vehicles Elsevier BV Piezoelectric nanogenerator;Triboelectric nanogenerator;Bionic micro

    93Fabrication of flapping wing mechanism using fused deposition modeling and measurement of aerodynamic forces

    Saravana Kompala; Balasubramanian Esakki; 2019-03
    [機械與機電工程學系暨研究所] 期刊論文
    Journal of Aeronautics, Astronautics and Aviation 51(1), p.131-140
    deposition modeling and measurement of aerodynamic forces 中華民國航太學會 flapping wing micro aerial vehicle;fused deposition modeling;injection moulding;wind

    94STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs

    Lai, Cheng-Hong; Huang, Chao-Tsai (CT); 2021-05-13
    [化學工程與材料工程學系暨研究所] 期刊論文
    SPE Technical Papers, ANTEC2021
    coupling;micro-computerized tomography (-CT) The fiber-reinforced plastics (FRP) material has been applied into industry as one of the major lightweight

    95PSO-based algorithm applied to quadcopter micro air vehicle controller design

    Tran, HK; Chiou, JS2016-09-15
    [資訊管理學系暨研究所] 期刊論文
    Micromachines 7(9), 168
    Tran, HK Chiou, JS PSO-based algorithm applied to quadcopter micro air vehicle controller design particle swarm optimization (PSO)-based

    96Bifurcation diagram of a Robin boundary value problem arising in MEMS

    Jong-Shenq Guo; Nikos I. Kavallaris; 2022-11-30
    [應用數學與數據科學學系] 期刊論文
    Hiroshima Mathematical Journal 52(3), p.311-320
    University, Mathematics Program bifurcation diagram;micro-electro mechanical system;pull-in voltage;Robin boundary condition;stationary solution We consider

    97Bifurcation diagram of a Robin boundary value problem arising in MEMS

    Jong-Shenq Guo; Nikos I. Kavallaris; 2022-11-15
    [應用數學與數據科學學系] 期刊論文
    Hiroshima Math. J. 52(3), p.311-320
    University bifurcation diagram;micro-electro mechanical system;pull-in voltage;Robin boundary condition;stationary solution We consider a parabolic problem

    98Enhancing the surface quality of FDM processed flapping-wing micro mechanism assembly through RSM-TOPSIS hybrid approach

    Rajamani, Devaraj; Balasubramanian, Esakki; 2022-11-19
    [機械與機電工程學系暨研究所] 期刊論文
    Processes 10(11), 2457
    Rajamani, Devaraj Balasubramanian, Esakki Yang, Lung-Jieh Enhancing the surface quality of FDM processed flapping-wing micro mechanism assembly

    99Utilizing the Taguchi Method to Optimize Rotor Blade Geometry for Improved Power Output in Ducted Micro Horizontal-Axis Wind Turbines

    Ouyang, Kwan; Chen, Tzeng-yuan; 2024-05-31
    [航空太空工程學系暨研究所] 期刊論文
    Sustainability 16(11), 4692
    Ouyang, Kwan Chen, Tzeng-yuan You, Jun-jie Utilizing the Taguchi Method to Optimize Rotor Blade Geometry for Improved Power Output in Ducted Micro

    100Bioinspiration and Biomimicry: What Can Engineers Learn from Biologists?

    Sane, Sanjay P.2016-03
    [淡江理工學刊] 第19卷第1期
    Journal of Applied Science and Engineering 19(1), pp.1-6
    ;Micro-air Vehicles;Wing Flexion;Gecko Feet;Wasp Ovipositor The field of biomechanics thrives on collaborations between engineers and biologists


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋