5711.  應用於自律學習之自律學習系統的設計與製作

許智勛; Hsu, Chih-hsun ,  2005
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
of this system is to design a learning environment for learner with various kinds of selection and control mechanism. This system comprise two

5712.  IEEE 802.16正交分頻多工多重存取系統下具通道感知之重新子通道編號以及下行傳輸配置機制

謝宗翰; Hsieh, Tzung-han ,  2009
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
mechanisms: subchannel renumbering mechanism and burst allocation mechanism, for throughput gains and control message overhead reduction, respectively

5713.  Efficient sleep-awake scheduling mechanism for target coverage problem in wireless sensor networks

王子嘉; Wang, Tzu-chia ,  2009
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
Tradeoff in Density Control on Sensor Networks,” in Proceedings of the IEEE International Conference on Parallel and Distributed Systems (IEEE ICPADS

5714.  資料探勘應用在偵測電信系統之賴帳行為

羅宸逸; Lo, Chen-yi ,  2007
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
] Results of Worldwide Telecom Fraud Survey. (2003, March). Communications Fraud Control Association. http://www.cfca.org/pressrelease/Fraud-Loss%20

5715.  運用智慧型代理人機制於PSTN與VoIP電話帳務服務之研究

林益弘; Lin, Yi-hung ,  2006
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
& Sons,March 2002.. [20] Postel, J., “ Transmission Control Protocol”, RFC 761, January 1980 [21] Päivi Kallio1, Giovanni Cortese2, Roberto Tiella2

5716.  自主機器人對於環境中點特徵與區域特徵的偵測與追蹤

曹雅威; Tsao, Ya-wei ,  2008
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
in large indoor environment, Proceedings CACS International Automatic Control Conference. [21] Zhang, Z., 1994, Determining the Epipolar Geometry and its

5717.  創新毛細驅動微型控制鉸鍊

黃建博; Huang, Jyam ,  2008
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
actuators with electroplated permalloy for fluid dynamics control,” Sensors and Actuators A, 78 (2), pp. 190-197 (1999). [7] H. Steinbeiger, “Characteristic

5718.  微衛星結構設計分析與應用

林建銘; Lin, Chien-ming ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
of the Microsatellite UNISAT” 【16】 “Dynamics and Control of SEDSAT”,Enrico C. Lorenzini,Gordon E.Gullahorn,Mario L.Cosmo. 【17】 “NAVAL POSTGRADUATE SCHOOL

5719.  應用適應性模糊推論系統於板金彎曲成形模具形狀最佳化設計

張致緯; Chang, Chih-wei ,  2008
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
. 18.B. N. Maker, User’s guide to static springback simulation using Ls-dyna, 1998. 19.C. C. Lee, “Fuzzy logic in control systems: fuzzy logic controller

5720.  回應表面法的模糊參數與變數工程最佳化設計

陳文祥; Chen, Wen-hsiang ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
of each fuzzy variable is vary, it is required to consider a way of design control so that the performance robustness can be achieved. The second one

5721.  微衛星TUUSAT-1A之CCD酬載系統模組化與影像壓縮軟體之設計

鍾沅廷; Chung, Yuan-ting ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
that can save on OBC memory , and relative reduction much transmission time；According to the control logic requirement, the logical photograph functions were

5722.  微結構三維流場與熱傳現象

邱昱中; Chiu, Yu-chung ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
Control Conference, Snowmass Village, CO, 1997. [13] Piekos, E. S., and Breuer, K. S., “Numerical Modeling of Micromechanical Devices Using the Direct

5723.  方杯深引伸成形極限之最佳化料片之研究

于國光; Yu, Kuo-kuang ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
of planar anisotropic sheet,” Journal of Materials Processing Technology, Vol.52, pp.472-488 (1995). 10.Almetoglu, M., Kinzel, G. and Altan, T., “Control

5724.  撞球機器人在九號球局之應用

黎哲廷; Li, Je-ting ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
and Control (ICNSC’04), March, 21-23, 2004, Taipei, Taiwan. [8] J. S. Yang, Z. M. Lin and C. Y. Yang, “Grey Decision-Making for a Billiard Robot,” IEEE

5725.  線性管狀直流無刷馬達研製

陳泓宇; Chen, Hung-yu ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
Control Conference, vol. 2, 2000, pp. 903- 908. [17] A. Cavagnino, M. Cristino, M. Lazzari, F. Profumo, and A. Tenconi, “A simple method to predict

5726.  聚二甲基矽氧烷鍍金之漣漪形成機制與型態

李育修; Li, Yu-xiu ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
and J Zhang, “Nanostructure formation by O2+ ion sputtering of Si/SiGe heterostructures”, Nanotechnology, 14 (2003) ppt1187-1191. 26.賴怡仁, “Size control

5727.  直接甲醇燃料電池之性能分析與系統設計

張靜怡; Chang, Jing-yi ,  2005
[Graduate Institute & Department of Aerospace Engineering] Thesis
. The first part of this paper is to develop an automatic diagnostic system. The developed system consists of measuring and control parts. The information

5728.  太陽能電力電源管理系統測試環境建立與系統驗證

楊秉穎; Yang, Ping-ying ,  2007
[Graduate Institute & Department of Aerospace Engineering] Thesis
. Spec. Conf., 1993, pp. 581–587. [16]Simoes M. G., Franceschetti N. N., Friedhofer M., ”A fuzzy logic based photovoltaic peak power tracking control

5729.  應用逐次線性規劃法結合移動限制技術於結構最佳化設計之研究

黃建翰; Huang, Chian-han ,  2007
[Graduate Institute & Department of Aerospace Engineering] Thesis
, Martins, P.G., Mota Soares, C.M., Mota Soares, C.A., 2006, "Optimal design in vibration control of adaptive structures using a simulated annealing

5730.  Numerical simulation of flapping wing aerodynamic performance under severe weather conditions

黃建魁; Huang, Chian-kuei ,  2007
[Graduate Institute & Department of Aerospace Engineering] Thesis
. of Exp. Biology Vol. 207, pp. 1889-1907, 2004. [14] Ho, S., H. Nassef, N. Pornsinsirirak, Y. C. Tai and C. M. Ho, “Unsteady Aerodynamics and Flow Control

5731.  輕型運動航空載具起落架關鍵負載分析

陳建銘; Chen, Chan-ming ,  2008
[Graduate Institute & Department of Aerospace Engineering] Thesis
is 1900kg. In dynamic simulate test, verify the accuracy by the changes of dynamic energy and internal energy, hourglass deform, contact state. After

5732.  以微機電系統為基礎之飛行資訊量測組件設計與製作

吳宗興; Wu, Tsung-hsing ,  2008
[Graduate Institute & Department of Aerospace Engineering] Thesis
of Vibrating-Member Gyroscope”, IEEE Transactions on Automatic Control, Vol. AC-23, No. 4, August 1978. [22] ADXRS150 Single Chip Yaw Rate Gyro with Signal

5733.  應用移動漸近線法於結構之最佳化設計

郭純孜; Kuo, Chun-tzu ,  2008
[Graduate Institute & Department of Aerospace Engineering] Thesis
Congress on Intelligent Control and Automation, June 21-23. [14] 陳匡佑，2007，“應用移動漸近線法於有限元素的最佳化設計”，淡江大學機械與機電工程研究所碩士論文。 [15] Fleury C., Braibant V., 1986

5734.  拍撲翼流場之數值模擬

李柏勳; Li, Po-hsiung ,  2008
[Graduate Institute & Department of Aerospace Engineering] Thesis
: kinematic control and aerodynamics of oscillating wings,” [12] Zanker, J.M., “The wing beat of Drosophila melanogaster I. Kinematics.” Philosophical

5735.  Design and novel with zero- voltage switching full-bridge quasi-resonant inverter for multiple cold-cathode lamps driver

李鳳郎; Lee, Feng-lang ,  2009
[Graduate Institute & Department of Electrical Engineering] Thesis
technique. It uses phase-shift control to achieve the result. The transistor has the characteristic of zero voltage switching, using a transformer. A main