4941.  Exploring TQM-Innovation relationship in continuing education: A system architecture and propositions

Liao, Shu-Hsien; Chang, Wen-Jung; Wu, Chi-Chuan ,  2010-11
[管理科學學系暨研究所] 期刊論文
Total Quality Management & Business Excellence 21(11), pp.1121-1139
and propositions TQM; innovation; strategic management; continuing education; system architecture; university; case study Total quality management (TQM) has

4942.  Cobalt oxide nanosheet and CNT micro carbon monoxide sensor integrated with readout circuit on chip

Dai, Ching-liang; Chen, Yen-chi; Wu, Chyan-chyi; Kuo, Chin-fu ,  2010-04
[機械與機電工程學系暨研究所] 期刊論文
Sensors 10(3), pp.1753-1764
sensor integrated with readout circuit on chip Basel: MDPI AG micro carbon monoxide sensor; cobalt oxide film; readout circuit The study presents a micro

4943.  Design of Protective Coatings for Glass Lens Molding

Ma, Kung Jeng; Chien, H.H.; Chuan, W.H.; Chao, Choung Lii; Hwang, K.C. ,  2007-12
[機械與機電工程學系暨研究所] 期刊論文
Key Engineering Materials 364-366, pp.655-661
in this study. The influence of operation temperature, ambient gas, substrate materials, and thin film composition on wettability of glass at high temperature

4944.  Development of a Non-contact Measurement System for In-situ Tool Profile Monitoring

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-11
[機械與機電工程學系暨研究所] 期刊論文
J. of C.C.I.T 35(1)
material for cutting precision diffractive optical elements, aspheric metal optical components etc. As long as tools are in use, it is only the matter

4945.  Development of a Non-contact Tool Setting System for Precision Diamond Turning

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-01
[機械與機電工程學系暨研究所] 期刊論文
Materials Science Forum 505-507, pp.367-372
-contact precision tool setting system is developed and built in this study using edge-detection image processing and sub-pixel dividing techniques

4946.  Influence of Inertia and Dissipative Forces on the Dynamic Response of Poroelastic Materials

Tsay,H.-S.; H. B. Kingsbury ,  1992-01-01
[機械與機電工程學系暨研究所] 期刊論文
Int. J. Solids Structures29(5), pp.641-652
boundary conditions on the solutions to these equations and presents a systematic study of the effect of the dissipation term of Biot's theory on the system

4947.  Research on Fabricating CVD Diamond Microstructures Using RIE Process

Chou, Wen-chen; Chao, Choung-lii; Fan, Wei-haw; Ma, Kung-jeng ,  2009-02
[機械與機電工程學系暨研究所] 期刊論文, [資訊工程學系暨研究所] 期刊論文
Key Engineering Materials 407-408, pp.41-44
. The scanning electron microscope (SEM), transmission electron microscope (TEM) and micro-Raman spectroscopy were used to study the surface morphology and sub

4948.  Preparation of polymer/silica hybrid hard coatings with enhanced hydrophobicity on plastic substrates

Chang, Chao-Ching; Oyang, Tai-Yueh; Hwang, Feng-Hsi; Chen, Ching-Chung; Cheng, Liao-Ping ,  2012-01
[化學工程與材料工程學系暨研究所] 期刊論文
Journal of Non-Crystalline Solids 358(1), pp.72–76
-curing; Plastic substrate; Hydrophobicity In this study, an easy method to increase hydrophobicity of the polymer/silica hybrid coating was demonstrated

4949.  Heat-Transfer Efficiency Improvement of Double-Pass Concentric Circular Heat Exchangers under Uniform Wall Fluxes

Ho, Chii-dong; Tu, Jr-wei; Yeh, Shih-cheng; Guo, Jia-jan ,  2008-08-01
[化學工程與材料工程學系暨研究所] 期刊論文
Int. Comm. Heat Mass Transfer 35(7), pp.828-832
recycle was also discussed in this study. (C) 2008 Elsevier Ltd. All rights reserved. 2008-08-01 en Int. Comm. Heat Mass Transfer 35(7), pp.828-832

4950.  CFD simulation of the two-phase flow for a falling film microreactor

Ho, Chii-Dong; Chang, Hsuan; Chen, Hsi-Jen; Chang, Cheng-Liang; Li, Hsieh-Hsung; Chang, Yin-Yu ,  2011-07-01
[化學工程與材料工程學系暨研究所] 期刊論文
International Journal of Heat and Mass Transfer 54(15-16), pp.3740-3748
, pressure and shear stress profiles, are analyzed. 2-D simulation is adopted for the study of the relationship of liquid flow rate and film thickness