淡江大學機構典藏:搜尋結果
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64185/96962 (66%)
造訪人次 : 12489575      線上人數 : 2746
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    類別瀏覽

    正在載入社群分類, 請稍候....

    作者瀏覽

    正在載入作者分類, 請稍候...

    年代瀏覽

    正在載入年代分類, 請稍候....

    結果 24991-25015 / 27769.

    上一頁991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 下一頁    每頁顯示[10|25|50]項目
    [ 只搜尋有全文項目| 搜尋所有項目]     排序欄位 順序

    24991適用於無線感測網路的密鑰管理技術之研究

    黃仁俊2005
    [資訊工程學系暨研究所] 研究報告
    淡江大學資訊工程學系 黃仁俊 適用於無線感測網路的密鑰管理技術之研究 The Study of Key Management System for Wireless Sensor Network 網路安全;無線感測網路;無線通訊安全;密鑰管理;密鑰分配;資訊安全;對稱式密碼系統 隨著無線傳輸技術

    24992紊流反應流之機率密度函數模式研究

    洪祖昌2001
    [機械與機電工程學系暨研究所] 研究報告
    number flows, it can be expected, from a rough use of the Central Limit Theorem, that the fluctuation of momentum due to the pressure force can

    24993微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III)

    康尚文2001
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 康尚文 微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III) The Study on Packaging and Testing of Micro Coolers(III) 封裝;測試;微冷卻器;Packaging;Testing;Micro

    24994次微米顆粒型鋁基複合材料之熔煉鑄造暨機械性質之研究

    林清彬2000
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程學系 林清彬 次微米顆粒型鋁基複合材料之熔煉鑄造暨機械性質之研究 A Study on Manufacturing and Properties of Submicro Particulate Reinforced Aluminum Alloy 2000 行政院國家科學委員

    24995微冷卻器之整合研究-子計畫II:微冷卻器之製程技術研究(III)

    楊龍杰2001
    [機械與機電工程學系暨研究所] 研究報告
    ., “Fabrication and characterization of a microsystem for a micro-scale heat transfer study”, J. Micromech.. Microeng., 9(4), pp.422-428, 1999. [11

    24996微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究

    杜文謙2000
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究 The Study on Thermal and Fluid Technology of Micro Coolers 微冷卻器;微流道;微熱管;流場可視化;Microcooler;Microchannel

    24997盲用中文點字顯示方固定座改良與模具設計分析

    葉豐輝; 蔡慧駿2000
    [機械與機電工程學系暨研究所] 研究報告
    Cell frame's injection molding processing parameters on the products' filling, cooling and warpage will be studied. During the study, the computer

    24998微機電順從機構的拓樸最佳化及設計(I)

    史建中2002
    [機械與機電工程學系暨研究所] 研究報告
    as a Low Volume Fraction Limit of the Perforated Plate Topology Optimization Problem: an Asymptotic Study", Structural Optimization, Vol. 6

    24999微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III)

    杜文謙2001
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III) The Study on Thermal and Fluid Technology of Micro Coolers(III) 熱流;微冷卻器;Thermal fluid technology

    25000低成本氣象衛星及其星系之關鍵技術研究-總計畫(II)

    洪祖昌; 陳裕愷2004
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程學系 洪祖昌 陳裕愷 低成本氣象衛星及其星系之關鍵技術研究-總計畫(II) Design and Fabrication Study of The Low-Cost Weather Satellite and It's Constellation(II) 2004 行政院國

    25001金屬成形極限之三維有限元素分析軟體開發與整合應用-子計畫二:金屬板材深引伸成形極限之三維有限元素分析(III)

    李經綸; 葉豐輝2005
    [機械與機電工程學系暨研究所] 研究報告
    A Study of forming limit in deep drawing process of metal sheet by the 3-D FEM analysis 計畫類別:□ 個別型計畫 ■ 整合型計畫 計畫編號:NSC 94-2212-E-032-001 執行期間:92 年 08

    25002智慧型微冷卻系統之熱流技術研究(I)

    杜文謙2002
    [機械與機電工程學系暨研究所] 研究報告
    淡江大學機械與機電工程研究所 杜文謙 智慧型微冷卻系統之熱流技術研究(I) The Study on Thermal and Fluid Technology in Smart Micro-Cooling System(I) 2002 行政院國家科學委員會 http

    25003利用微小型衛星編隊飛行搭配干涉攝影技術應用於地球科學之研究

    蕭富元2005
    [航空太空工程學系暨研究所] 研究報告
    by a single spacecraft. A more efficient way to perform interferometric imagine is the usage of spacecraft formation. Results of this study will contribute

    25004結構之風力載重及受風反應(I)-子計畫III:計算風工程中空氣動力特性之研究

    李世鳴2002
    [航空太空工程學系暨研究所] 研究報告
    淡江大學航空太空工程學系 李世鳴 結構之風力載重及受風反應(I)-子計畫III:計算風工程中空氣動力特性之研究 The Study of Aerodynamics Characteristics in Computational Wind Engineering 2002 行政院國家科學委員會

    25005風扇流中渦流產生器對流場結構及熱傳增益影響之探討

    陳增源2002
    [航空太空工程學系暨研究所] 研究報告
    ] studied the heat transfer enhancement on plate fin surfaces on which local vortex generators produced a set of contra-rotating vortices. Their study

    25006晴空亂流與陣風時飛機最佳飛行軌跡之探討

    宛同2001
    [航空太空工程學系暨研究所] 研究報告
    . In this research we use Matlab to create 3-D turbulence based on the real turbulence profiles, and prediction parameters (indices) T1, T2 and This text

    25007異向性層域材料之擴展裂紋動力破壞解析

    應宜雄2001
    [航空太空工程學系暨研究所] 研究報告
    analysis of dynamic anti-plane crack propagation with a constant velocity in an anisotropic layered medium is presented in this study. A modified linear

    25008無線光通訊之智慧型盲人預警監控及導引網路系統-子計畫一提昇私校研發能量專案計畫-無線光傳收機之研製(I)

    江正雄; 郭建宏; 2004
    [電機工程學系暨研究所] 研究報告
    . The FSO needs no licensed RF channels, and the bit rate is much higher than 2 Wi-Fi networks. It is a potential network for future use, and needs to study

    25009高速光通信系統及元件之研究-子計畫二:智慧型光網路研究與模擬測試平台之建立(II)

    李揚漢2003
    [電機工程學系暨研究所] 研究報告
    淡江大學電機工程學系 李揚漢 高速光通信系統及元件之研究-子計畫二:智慧型光網路研究與模擬測試平台之建立(II) Study of Smart Optical Network and Implementation of Simulation Testbed(II) 2003 行政院國家科學委員會

    25010智慧型無線網路資源監控系統之研製

    許獻聰2005
    [電機工程學系暨研究所] 研究報告
    of S-WIN. This project encourages us to study the wireless transmission protocol and to develop the technology of embedded systems. It is expected

    25011智慧型寬頻光纖通信網路研究-子計畫三:智慧型光CDMA網路(III)

    李揚漢; 許獻聰2001
    [電機工程學系暨研究所] 研究報告
    access (OCDMA) is one of the techniques to effectively use the large bandwidth of optic fiber. In such systems, the data is encoded by a specific code

    25012無線寬頻接收端之寬頻類比/數位轉換器與可調適性濾波池之新架構研究與設計

    江正雄2001
    [電機工程學系暨研究所] 研究報告
    , 1990. [4]R. Schreier, “An empirical study of high-order single-bit delta-sigma modulators,” IEEE Trans. Circuits and Syst. II, vol

    25013低功率短距離無線隨身精靈系統之研製

    許獻聰2004
    [電機工程學系暨研究所] 研究報告
    802.15.4. This project encourages us to study the wireless transmission protocol and to develop the technology of embedded systems. It is expected

    25014以網路處理器為基礎之 IPv6 高層交換器之研製-子計畫III:IPv6 交換器之高速 IPv6 資料流分類方法之研製(II)

    許獻聰; 陳文賢2002
    [電機工程學系暨研究所] 研究報告
    of communication to study and implement network equipments. In this integrated project, the object is to construct a switching platform with highly

    25015以網路處理器為基礎之IPv6高層交換器之研製-子計畫III:IPv6交換器之高速IPv6資料流分類方法之研製(III)

    許獻聰; 陳文賢2003
    [電機工程學系暨研究所] 研究報告
    techniques have to further promote from 展已經從第三層網際網路位址的查詢研 study and test phases of network programs 究,提升到第四層資料分流甚至是第七層


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋