1826.  Manufacturer's pricing and lot-sizing decisions for perishable goods under various payment terms by a discounted cash flow analysis

Chun-TaoChang; Liang-YuhOuyang; Jinn-TsairTeng; Kuei-KueiLai; Leopoldo, EduardoCárdenas-Barrón ,  2019-12
[統計學系暨研究所] 期刊論文
International Journal of Production Economics 218, p.83-95
and freshness of a perishable item (i.e., time to sell-by date), and (2) the supplier offers an upstream ACC payment to the manufacturer, while

1827.  應用時域有限差分法於平面天線結構的分析

涂志明; Tu, Chih-ming ,  2008
[電機工程學系暨研究所] 學位論文
分法;透明源;平面天線;遞回損失;輻射場型;FDTD;transparent source;planar antenna;S11;radiation pattern 本論文探討有限時域差分法（Finite Difference Time Domain ，FDTD）應用於平面天線結構的分析。首先

1828.  電流模式同步整流降壓轉換器 : 使用新型死區控制電路

王偉; Wei, Wang, ,  2011
[電機工程學系暨研究所] 學位論文
circuit 降壓;同步整流;死區;切換式電源;交換式電源;DC/DC;Buck;Synchronism;Dead-time;PWM;Current-mode 本論文之內容為設計及實現一個高頻切換的直流對直流同步整流降壓轉換器，其中高速切換的特性能縮小電源轉換器的輸出端濾波電感及電容的大小，能迎合現代科技講究

1829.  運用時間關係預測會員回訪率

楊晴涵; Yang, Ching-Han ,  2011
[資訊工程學系暨研究所] 學位論文
淡江大學資訊工程學系資訊網路與通訊碩士班 蔣定安; Chiang, Ding-An 楊晴涵 Yang, Ching-Han 運用時間關係預測會員回訪率 Prediction of a member's return visit rate using the time factor 行為定位;顧客

1830.  有關Opial以及Hermite-Hadamard不等式的推廣與應用

羅仁傑; Lo, Jen-Chieh ,  2012
[應用數學與數據科學學系] 學位論文
inequality and applications OPIAL不等式;Opial's inequality;Convex function;時間尺度;赫米提-阿達瑪不等式;凸向函數;Time scales;Hermite-Hadamard's inequality 本篇論文共分為四章。第一章中

1831.  Mining Correlation Patterns among Appliances in Smart Home Environment

Chen, Yi-Cheng; Chen, Chien-Chih; Peng, Wen-Chih; Lee, Wang-Chien ,  2014-05
[資訊工程學系暨研究所] 會議論文
The 18th Pacific-Asia Conference on Knowledge Discovery and Data Mining (PAKDD 2014), pp.222-233
Springer correlation pattern;smart home;sequential pattern;time intervalbased data;usage representation Since the great advent of sensor technology

1832.  超市會員回購力分析

于靖; Yu, Ching ,  2014
[資訊工程學系暨研究所] 學位論文
淡江大學資訊工程學系碩士班 蔣璿東 于靖 Yu, Ching 超市會員回購力分析 Analysis of supermarket member's repurchase ability 時間函數;概念飄移;顧客輪廓;行為定位;Time function;concept drift

1833.  An Efficient Group-based Data Backup and Recovery Scheme in Cloud Computing Systems

Po-Jen Chuang; Chung-Hsing Wang ,  2017-01-01
[電機工程學系暨研究所] 期刊論文
Journal of Information Science and Engineering 33(1), p.183-198
failure, such a practice helps reduce the needed data backup volume and recovery time, and reaches up to 3/6 fault-tolerance ratios. Our scheme attains

1834.  Mapping knowledge to rules for scheduling expert systems

劉艾華; Liou, Ay-hwa Andy; Wu, Ming-tser ,  1996
[資訊管理學系暨研究所] 期刊論文
Expert systems with Applications 10(3-4), pp.341-350
. For the same reason, we define the term "alternative" as the choice of an instructor who performs a job at a specific room during a particular time

1835.  An EOQ inventory model with time-varying demand and Weibull deterioration with shortages

Wu, Jong-wuu; Lin, C.; Tan, B.; Lee, W. C. ,  2000-06-01
[統計學系暨研究所] 期刊論文
International Journal of Systems Science 31(6), pp.677-683
淡江大學統計學系 Wu, Jong-wuu Lin, C. Tan, B. Lee, W. C. An EOQ inventory model with time-varying demand and Weibull deterioration with shortages Taylor

1836.  China's Impact on the Raw Materials Diplomacy of the European Union: Competition or Coordination?

Biedermann, Reinhard ,  2017-04-01
[全球政治經濟學系] 會議論文
Panel on The European Union and China Today
Relations Time: Soturday, 01/Apr/2017: 5:30pm - 3:15pm Session Chair: George Lawson, LSU Mathaas Albort Biolefeld University, Germany Barry Buzan

1837.  Effectiveness of Story-Centred Care Intervention Program in older persons living in long-term care facilities: A randomized, longitudinal study

Hui-Wan Chuang, Chi-Wen Kao, Ming-Der Lee, Yue-Cune Chang ,  2018-03-19
[企業管理學系暨研究所] 期刊論文
PLoS One. 2018 13(3)
describe their health stories, health caregivers sensitively pay atten- tion, and attentively listen; care-receivers share past life experiences, thoughts

1838.  Allocating precise submeshes in mesh connected systems

莊博任; Chuang, Po-jen; Tzeng, Nian-feng ,  1994-02
[電機工程學系暨研究所] 期刊論文
IEEE Transactions on Parallel and Distributed Systems 5(2), pp.211-217
submesh allocation, and thereby achieves high processor utilization, as well as short task waiting time in any mesh system, even those with unequal sides

1839.  Dynamical renormalization group approach to the altarelli-parisi-lipatov equations

Boyanovsky, D.; de Vega, H.J.; Lee, D.S.; Wang, S.Y.; Yu, H.L. ,  2002-01
[物理學系暨研究所] 期刊論文
Physical Review D (Particles and Fields) 65(4), 045014(7 pages)
are identified with the secular divergences (terms that grow in time) that emerge in a perturbative treatment of the kinetic equations

1840.  Hybrid CIP/M&M for micro-mobility management under the multilayer wireless network

Wang, Ying-Hong; Huang, Hui-Min; Li, Huang-Yi ,  2005-03
[資訊工程學系暨研究所] 會議論文
Advanced Information Networking and Applications, 2005. AINA 2005. 19th International Conference on, vol.2, pp.51-54
with various kinds of handoff, but also suit the macro-mobility management (proposed by Evolutes) to support real time and non-real time data flows

1841.  Kinetics of pentachlorophenol degradation in soil using heme and peroxide

Chen, Shyi-tien; Stevens, David K.; Kang, Guyoung; Hsu, Jia-chin; Wu, Shuo-jye ,  2009-04
[統計學系暨研究所] 期刊論文
Journal of Environmental Engineering - ASCE 135(4), pp.279-284
degradation over time, and the outcomes were satisfactory. 2009-04 en Journal of Environmental Engineering - ASCE 135(4), pp.279-284 0733-9372 http

1842.  Optimal manufacturer’s replenishment policies in the EPQ model under two levels of trade credit policy

Teng, Jinn-Tsair; Chang, Chun-Tao ,  2009-06
[統計學系暨研究所] 期刊論文
European Journal of Operational Research 195(2), pp.358-363
the costomer’s trade credit periid offered by manufacturer in years T the cycle time in yeors TVC(T) the annual total relevant cost, which os

1843.  Optimized Adaptive Sliding-mode Position Control System for Linear Induction Motor Drive

Lee, Tsu-Tian; Hsu, Kou-Cheng; Chiang, Hsin-Han; Huang, Chin-I ,  2013-04-10
[電機工程學系暨研究所] 會議論文
2013 10th IEEE International Conference on Networking, Sensing and Control, pp.355-360
to adjust the fuzzy boundary parameters in real-time. It is a quite complicated process of parameter tuning, especially for the proposed controller, due

1844.  Solving Time Domain Microwave Imaging for Two Dimensional Inhomogeneous Dielectric Cylinder

丘建青 ,  2014-03-01
[電機工程學系暨研究所] 期刊論文
International Journal of RF and Microwave Computer -Aided Engineering 24(2), p.147–154
電機工程學系暨研究所 丘建青 C. C. Chiu Solving Time Domain Microwave Imaging for Two Dimensional Inhomogeneous Dielectric Cylinder FDTD APSO DDE inhomogeneous

1845.  The Sleep Control Strategy for Wireless Sensor Networks

Wu, Shih-Jung ,  2011-12
[資訊創新與科技學系] 期刊論文
Advances in Information Sciences and Service Sciences 3(11), p.282-290
consumption is limited. Effectively controlling the power of the sensor node and extending the life time of the whole network become very important issues

1846.  Parameter Estimations Based on Exponential
Progressive Type II Censored Data with Binomial Removals

Wu, Shuo-jye; Chang, Chun-tao ,  2002-09-01
[統計學系暨研究所] 期刊論文
International journal of information and management Sciences 13(3), pp.37-46
. The Expected Test Time In proctice, it is often useful to have an idea of the duration of a life test. Tharefore it is importanttocompute

1847.  確定提撥退休金計畫之保證

陳炤良 ,  2005
[經濟學系暨研究所] 研究報告
the participant’s work life, given the current mandatory minimum requirement of a contribution rate of 6%. Key words: Pension guarantee, Pension

1848.  含部分欠撥和退化之兩個售價及批量存貨模式的比較

歐陽良裕 ,  2004
[管理科學學系暨研究所] 研究報告
with time-proportional demand when shortages were prohibited. Sachan (1984) then generalized the EOQ model to allow for shortages. Later, Hariga (1996

1849.  允許欠撥的一些退化性物品之最適訂購策略

謝組邦; Hsieh, Tsu-pang ,  2007
[管理科學學系暨研究所] 學位論文
品;售價;貨幣的時間價值;容量限制;欠撥率;Deteriorating items;Price;Time-value of money;Capacity constraint;Backlogging rate 傳統的存貨模式通常假設物品可以永久保存以滿足未來的需求，以及企業擁有單一且無容量限制的倉庫

1850.  Brazing diffusion bonding of micro-nickel cylinders and SUS-316 stainless steel

康尚文; Kang, Shung-wen; Chen, Yu-tang; Liu, Hsung-pen ,  2005-09
[機械與機電工程學系暨研究所] 期刊論文
Journal of Materials Processing Technology 168(2), pp.286-290
. The experimental results showed that the bonding strength is directly proportional to the brazing time. Additionally, good bonding strength was achieved