531.  Modeling and Vibration Control of a Drum-Type Washing Machine via MR Fluid Dampers

Tyan, Feng; Chao, Chung-Ta; Tu, Shun-Hsu ,  2009-11
[航空太空工程學系暨研究所] 會議論文
Proceedings of 2009 CACS International Automatic Control Conference, 5p.
淡江大學航空太空工程學系 Tyan, Feng Chao, Chung-Ta Tu, Shun-Hsu Tyan, Feng Modeling and Vibration Control of a Drum-Type Washing Machine via MR Fluid Dampers

532.  Development of an automatic surface finishing system (ASFS) with in-process surface topography inspection

陳炤彰; Chen, Chao-chang A.; Duffie, Neil A. ,  1996-12
[機械與機電工程學系暨研究所] 期刊論文
Journal of materials processing technology 62(4), pp.427-430
. Mizugaki, M. Sakamoto, K. Kamijo Development of a Metal-Mold Polishing ROBOT System with Contact Pressure Control Using CAD/CAM Data Annuals

533.  電動輔助自行車之智慧型控制系統模擬與分析

黃冠偉; Huang, Guan-Wei ,  2015
[機械與機電工程學系暨研究所] 學位論文
淡江大學機械與機電工程學系碩士班 楊智旭; Yang, Jr-Syu 黃冠偉 Huang, Guan-Wei 電動輔助自行車之智慧型控制系統模擬與分析 Simulation and analysis of the intelligent control system

534.  軟體定義網路中負載平衡策略之探討

陳相儒; Chen, Hsiang-Ju ,  2016
[電機工程學系暨研究所] 學位論文
。 Software Defined Network(SDN) concept decouples the control plane and the data plane of network devices. SDN can implement programmable network

535.  Dynamical modeling and boundary vibration control of a rigid-flexible wing system

Wei He; Tingting Wang; Xiuyu He; Lung-Jieh Yang; Okyay Kaynak ,  2020-12
[機械與機電工程學系暨研究所] 期刊論文
IEEE/ASME Transactions on Mechatronics 25(6), p.2711-2721
Wei He Tingting Wang Xiuyu He Lung-Jieh Yang Okyay Kaynak Dynamical modeling and boundary vibration control of a rigid-flexible wing system Boundary

536.  多孔吸音平板於被動/主動混合型吸音系統應用研究

蔡慧駿; 葉豐輝 ,  1999
[機械與機電工程學系暨研究所] 研究報告
to a newly proposed hybrid passive and active control system through an acoustical impedance matching method

537.  WRGP: Weight-Aware Route Guiding Protocol for Wireless Sensor Networks with Obstacles

Chang, Chih-yung ,  2006-12
[資訊工程學系暨研究所] 會議論文
Multimedia and Networking Systems Conference (MNSC 2006), Taiwan, pp.3302-3306
, 896410122@s96.tku.edu.tw AbstracW—The greedy forwarding routing protocol has been widely used for constructing a route with low control overheads in wireless

538.  Parameniscal cyst formation in the knee is associated with meniscal tear size: An MRI study

Wu Chia-Chun, Hsu Yi-Chih, Chiu Ying-Chun, Chang Yue-Cune (張玉坤), Lee Chian-Her, Shen Hsain-Chung, Huang Guo-Shu ,  2013-12-01
[應用數學與數據科學學系] 專書之單篇
Knee 20(6), pp. 556-561.
of a parameniscal cyst and a meniscal tear (the study group) and those who only exhibited a meniscal tear (the control group). The retrieved control images showed

539.  四旋翼機之姿態穩定控制

劉承霖; Liu, Chen-Lin ,  2015
[機械與機電工程學系暨研究所] 學位論文
filter;Fuzzy Control 本論文主要研究目的是設計四旋翼機的三軸姿態平衡控制器，三軸姿態分別是翻滾(roll)軸、俯仰(pitch)軸的姿態平衡，與偏航(yaw)軸的方向控制。系統先藉由陀螺儀(gyroscope)量測在四旋翼機三軸上的角速度，並以加速計(accelerometer)量測翻

540.  升降壓電源轉換器在風力發電之最大功率追蹤系統的應用研究

邱湘琳; Chiu, Hsiang-Lin ,  2015
[航空太空工程學系暨研究所] 學位論文
application 風力發電;最大功率追蹤;模糊控制;升降壓轉換器;Wind power system;buck-boost power converter;Maximum power point tracking (MPPT);Fuzzy logic control 本論文主要探討小型風力發電機之