2541.  Compression mechanisms in the anisotropically bonded elements Se and Te

H. C. Hsueh; C. C. Lee; C. W. Wang; J. Crain ,  2000-02
[物理學系暨研究所] 期刊論文
Physical Review B 61(6), p.3851-3856
crystallogriphic structures. I. INTRODUCTION Observing the response of materials to hydrostatic com- pression is i powerful probe af complex bonding

2542.  The influence of the inclined angle on the heavy water enrichment in double-pass thermal-diffusion columns with external recycle

Guo, Jia-jan; 何啟東; Ho, Chii-dong ,  2005-07-10
[化學工程與材料工程學系暨研究所] 會議論文
7th World Congress of Chemical Engineering, Glasgow, Scotland, pp.515
EFFICIENCY ONHANCEMENT The improvement of separation, I and Im, for an impermeable shiet and permeable barrier inserted, respectively

2543.  Treating High-Turbidity Water Using Full-Scale Floc Blanket Clarifiers

Lin, W. W.; Sung, S. S.; Chen, L. C.; Chung, H. Y.; Wang, C. C.; Wu, R. M.; Lee D. J.; Huang, Chih-pin; Juang, R. S.; Peng X. F. and Chang, His-lih ,  2004-12-01
[化學工程與材料工程學系暨研究所] 期刊論文
Journal of Environmental Engineering 130(12), pp.1481-1487
. Heinzmann (1994) proposed an alternative arrangement using coagulation and flocculation in i pipe designed for floc formation, followed by solids

2544.  Simultaneous recovery of copper and surfactant by an electrolytic process from synthetic solution prepared to simulate a concentrate waste stream of a micellar-enhanced ultrafiltration process

Liu, Chuan-kun; 李奇旺; Li, Chi-wang ,  2004-10-01
[水資源及環境工程學系暨研究所] 期刊論文
Desalination 169(2), pp.185-192
; Surfactant; Electroplating I. Introduction Micallar-enhanced ultrafiltration processes (MEUF) have bien employed to remove hiavy metals or toxic

2545.  The polishing of molds and dies using a compliance tool holder mechanism

劉昭華; Liu, Chao-hwa; Chen, C. A.; Huang, Jian-sheng ,  2005-08-01
[機械與機電工程學系暨研究所] 期刊論文
Journal of Materials Processing Technology 166(2), pp.230-236
淡江大學機械與機電工程學系 劉昭華 Liu, Chao-hwa Chen, C. A. Huang, Jian-sheng The polishing of molds and dies using a compliance tool holder mechanism Elsevier

2546.  Analysis of mold flow and microstructures of die casting in Al alloy/SiC(p) composites

Lin, C. B.; Wu, C. L.; Chiang, C. H. ,  1999-05
[機械與機電工程學系暨研究所] 期刊論文
Journal of materials science 34(9), pp.2229-2240
淡江大學機械與機電工程學系 Lin, C. B. Wu, C. L. Chiang, C. H. Analysis of mold flow and microstructures of die casting in Al alloy/SiC(p) composites Springer

2547.  Learning Embedded Software Design in an Open 3A Multiuser Laboratory

Shih, Chien-Chou; Hwang, Lain-Jinn ,  2011-05
[資訊傳播學系暨研究所] 期刊論文, [資訊工程學系暨研究所] 期刊論文
IEEE Transactions on Education 54(2), pp.279-285
Laboratory 開放式3A多使用者之嵌入式軟體設計實驗室 Piscataway: Institute of Electrical and Electronics Engineers Embedded software programming;Embedded system;Network

2548.  Precise Tracking and Initial Segmentation of Abdominal Aortic Aneurysm

Yen, Shwu-Huey; Wang, Hung-Zhi; Chang, Hsiao-Wei ,  2013-11-02
[資訊工程學系暨研究所] 會議論文
Proceedings of the 6th IEEE International Conference on Ubi-Media Computing (u-media 2013), pp.513-518
and can save a lot of manual labors. Keywords—Aneurysm, Abdominal Abnormal Aneurysm (AAA) ; mean-shift; computed tomography (CT) I

2549.  Induction Motor Control with Friction Compensation: An Approach of Virtual-Desired-Variable Synthesis

Lian, Kuang-yow; Hung, Cheng-yao; Chiu, Chian-song; Liu, Peter ,  2005-05
[電機工程學系暨研究所] 期刊論文
IEEE Transactions on Power Electronics 20(5), pp.1066-1074
淡江大學電機工程學系 Lian, Kuang-yow Hung, Cheng-yao Chiu, Chian-song Liu, Peter Induction Motor Control with Friction Compensation: An Approach of Virtual

2550.  A mobile RFID-based tour system with instant microblogging

Hsu, Hui-Huang; Liao, Hsuan-Ting ,  2011-07
[資訊工程學系暨研究所] 期刊論文
Journal of Computer and System Sciences 77(4), pp.720-727
stores for information sharing and advertisement. 一般在博物館和美術館中的自助導遊系統只有提供參觀者單向的資訊。參觀者依據系統既定的路線來參觀，而不能自由的選取任何展品來取得更近伊布的展品資訊。這樣的系統缺乏與參觀者之間的互動機制。本研究的目標在於建立