4921.  Membrane fouling mechanism and concentration effect in cross-flow microfiltration of BSA/dextran mixtures

Hwang, Kuo-Jen; Sz, Pan-Yu ,  2011-01
[化學工程與材料工程學系暨研究所] 期刊論文
Chemical Engineering Journal 166(2), pp.669–677
-theoretical methods proposed in this study. 2011-01 en Chemical Engineering Journal 166(2), pp.669–677 1385-8947 https://tkuir.lib.tku.edu.tw/dspace

4922.  Modeling and optimization of a solar driven membrane distillation desalination system

Chang, Hsuan; Wang, Gow-Bin; Chen, Yih-Hang; Li, Chien-Chang; Chang, Cheng-Liang ,  2010-12
[化學工程與材料工程學系暨研究所] 期刊論文
Renewable Energy 35(12), pp.2714-2722
) platform for the system performance and optimization study. The rigorous model for the spiral-wound air gap membrane distillation (SP-AGMD) module takes

4923.  Modeling extraction separation of Cu(II) in hollow-fiber modules

Guo, Jia-Jan; Ho, Chii-Dong; Tu, Jr-Wei ,  2009-08-01
[化學工程與材料工程學系暨研究所] 期刊論文
Chemical Engineering Science 64(15), pp.3455-3465
extractor module with concurrent- and countercurrent-flow were investigated theoretically and experimentally in this study. A two-dimensional mathematical

4924.  Efficient Architecture and Handoff Strategy used for VoIP Sessions in SIP Based Wireless Networks

吳庭育; Jhang, Rong-wei; Chao, Han-chieh ,  2007-10-01
[電機工程學系暨研究所] 期刊論文
Wireless Personal Communications 43, pp.201-214
mobile environment are also considered to be crucial. Therefore, this study describes the solutions by devising novel hierarchy network architecture

4925.  The market shares of small and medium scaled enterprises in Taiwan manufacturers

胡名雯; Hu, Ming-wen ,  1996-07
[產業經濟學系暨研究所] 期刊論文
The Asian economic journal 10(2), pp.117-131
for the outstanding performance of its SMEs. Limited knowledge about the causes of such performance has been revealed gradually. The main purpose of this study

4926.  The impact of assessment program on the nursing home market-the lesson from the illinois state

郝充仁 ,  1996-07
[風險管理與保險學系] 期刊論文
經濟研究 34(2)，頁201-231
to assessment program. The empirical study supports the hypothesis. The total impact of the assessment program increases private pay patient price, decreases

4927.  Electroless copper sulfide deposition on the polyacrylonitrile films with chelating agents and its EMI shielding effectiveness

陳幹男 ,  2009-08-01
[化學工程與材料工程學系暨研究所] 期刊論文
Macromol. Symposia.286, pp.116-264
In this study, an effective deposition of copper sulfide (Cux(x = 1,2)S) on the PAN film was proposed by an electroless deposition method with the reduction

4928.  Theoretical Investigation of Organic Amines as Hole Transporting Materials: Correlation to the Hammett Parameter of the Substituent, Ionization Potential, and Reorganization Energy Level

Pan, Jiunn-hung; Chou, Yu-ma; Chiu, Houn-lin; Wang, Bo-cheng ,  2009-05
[化學學系暨研究所] 期刊論文
Australian Journal of Chemistry 62(5), pp.483-492
(PC), and their derivatives, are found to be related to their Hammett parameter (σ). In this study, the density functional theory (DFT) calculation

4929.  Effects of Interface Workload In-Vehicle Information Systems on Driving Safety

Chen, Wan-hui; Lin, Chih-yung; Doong, Ji-ling ,  2005-12
[運輸管理學系暨研究所] 期刊論文
Transportation Research Record: Journal of the Transportation Research Board 1937, pp.73-78
is always an important issue. This study investigates the effects of auditory ICWS messages on driver performance while the driver's visual, hearing

4930.  Lossless data compression studies for the geostationary imaging Fourier transform spectrometer (GIFTS) with the bias-adjusted reordering preprocessing

Huang, Bormin; Wei, Shih-chieh; Huang, Allen H.-L.; Smuga-Otto, Maciek; Knuteson, Robert; Revercomb, Henry E.; Smith, William L. ,  2007-08
[資訊管理學系暨研究所] 會議論文
Proceedings SPIE V. 6683
assessment. In this paper we will study lossless compression of GIFTS data that has been collected as part of the calibration or Ground Based Tests

4931.  Dynamic fracture analysis of a finite crack subjected to an incident horizontally polarized shear wave

應宜雄; Ing, Yi-shyong; Ma, Chien-ching ,  1997-03-01
[航空太空工程學系暨研究所] 期刊論文
International journal of solids and structures 34(8), pp.895-910
solid is investigated in this study. In analyzing this problem, an infinite number of diffracted waves generated by two crack tips must be taken

4932.  Heat Transfer Characteristics of Gaseous Flow in Long Mini- and Microtubes

Chen, Ching-shung; Kuo, W.J. ,  2004-09
[航空太空工程學系暨研究所] 期刊論文
Numerical Heat Transfer, Part A 46(5), pp.497-514
procedure which solves the compressible boundary-layer equations is used to study the heat transfer characteristics of gaseous laminar and turbulent

4933.  Overseas Listing and Accounting Conservatism: Evidence from Chinese H-share Companies

Kung, Fan-Hua; James, Kieran; Cheng, Chia-Ling ,  2011-09-20
[會計學系暨研究所] 期刊論文
Asian Review of Accounting,19(3),p.266-278
significant in the 2006 to 2008 sub-period. Originality/value – The evidence in this study shows that differences in earnings conservatism arise from

4934.  Using Statistical Data and Signed Distance of Fuzzy Aggregate Evaluation Method on Application of Measuring Service Quality of Hotel

Huang, Tien-tsai; Huang, Wen-tao ,  2005-09
[管理科學學系暨研究所] 期刊論文
International Journal of Information and Management Sciences 16(3), pp.17-35
factor in hotel industrial survival and development. Recently, many literatures focus on evaluation of service quality on hotel industry and they use

4935.  A Fuzzy Hierarchy Integral Analytic Expert Decision Process in Evaluating Foreign Investment Entry-mode Selection for Taiwanese Bio-tech Firms

李旭華 ,  2011-03
[管理科學學系暨研究所] 期刊論文
Expert System With Applications 38(4), pp.3304-3322
of this study is to help bio-tech firms solve the foreign investment (FI) entry mode selection problem. This study combines the concepts of factor analysis

4936.  Mining customer knowledge to implement online shopping and home delivery for hypermarkets

Liao, Shu-Hsien; Chen, Yin-Ju; Lin, Yi-Tsun ,  2011-04
[管理科學學系暨研究所] 期刊論文
Expert Systems with Applications 38(4), pp.3982–3991
, this study combines online shopping and home delivery, and attempts to use association rules to determine unknown bundling of fresh products and non-fresh

4937.  The Impacts of Warrants Issuance on the Price and Trading Volumes of the Underlying Stock: The Call Warrants Case of Taiwan Stock Exchange

Chuang, Chung-chu; Chuang, Shuo-li ,  2005-03
[管理科學學系暨研究所] 期刊論文
International Journal of Information and Management Sciences 16(1), pp.17-34
/Information Leakage Effect; Event Study Method This paper is to investigate the impacts of derivative warrants issuance from January, 1997 to April

4938.  Relationships between Knowledge Inertia, Organizational Learning and Organization Innovation

廖述賢; Fei, W. C.; Liu, C. T. ,  2008-04
[管理科學學系暨研究所] 期刊論文
Technovation28(4), pp.183-195
strategy is termed "knowledge inertia". This study aims to establish the constructs of knowledge inertia and examine the relationships between knowledge

4939.  Exploring TQM-Innovation relationship in continuing education: A system architecture and propositions

Liao, Shu-Hsien; Chang, Wen-Jung; Wu, Chi-Chuan ,  2010-11
[管理科學學系暨研究所] 期刊論文
Total Quality Management & Business Excellence 21(11), pp.1121-1139
and propositions TQM; innovation; strategic management; continuing education; system architecture; university; case study Total quality management (TQM) has

4940.  Cobalt oxide nanosheet and CNT micro carbon monoxide sensor integrated with readout circuit on chip

Dai, Ching-liang; Chen, Yen-chi; Wu, Chyan-chyi; Kuo, Chin-fu ,  2010-04
[機械與機電工程學系暨研究所] 期刊論文
Sensors 10(3), pp.1753-1764
sensor integrated with readout circuit on chip Basel: MDPI AG micro carbon monoxide sensor; cobalt oxide film; readout circuit The study presents a micro

4941.  Design of Protective Coatings for Glass Lens Molding

Ma, Kung Jeng; Chien, H.H.; Chuan, W.H.; Chao, Choung Lii; Hwang, K.C. ,  2007-12
[機械與機電工程學系暨研究所] 期刊論文
Key Engineering Materials 364-366, pp.655-661
in this study. The influence of operation temperature, ambient gas, substrate materials, and thin film composition on wettability of glass at high temperature

4942.  Development of a Non-contact Measurement System for In-situ Tool Profile Monitoring

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-11
[機械與機電工程學系暨研究所] 期刊論文
J. of C.C.I.T 35(1)
material for cutting precision diffractive optical elements, aspheric metal optical components etc. As long as tools are in use, it is only the matter

4943.  Development of a Non-contact Tool Setting System for Precision Diamond Turning

Chao, C.L.; Cheng, T.A.; Lou, D.C.; Chao, C.W. ,  2006-01
[機械與機電工程學系暨研究所] 期刊論文
Materials Science Forum 505-507, pp.367-372
-contact precision tool setting system is developed and built in this study using edge-detection image processing and sub-pixel dividing techniques

4944.  Influence of Inertia and Dissipative Forces on the Dynamic Response of Poroelastic Materials

Tsay,H.-S.; H. B. Kingsbury ,  1992-01-01
[機械與機電工程學系暨研究所] 期刊論文
Int. J. Solids Structures29(5), pp.641-652
boundary conditions on the solutions to these equations and presents a systematic study of the effect of the dissipation term of Biot's theory on the system

4945.  Research on Fabricating CVD Diamond Microstructures Using RIE Process

Chou, Wen-chen; Chao, Choung-lii; Fan, Wei-haw; Ma, Kung-jeng ,  2009-02
[機械與機電工程學系暨研究所] 期刊論文, [資訊工程學系暨研究所] 期刊論文
Key Engineering Materials 407-408, pp.41-44
. The scanning electron microscope (SEM), transmission electron microscope (TEM) and micro-Raman spectroscopy were used to study the surface morphology and sub