23126.  觀光圖像下的地方建構與再現

黃頌音; Huang, Song-yin ,  2009
[建築學系暨研究所] 學位論文
and the projection subject imagination. Present paper by “Gun-Gliau” the tourism image is the object of study, discusses the different constructor, how the packing

23127.  溶膠凝膠法製備B2O3-P2O5-SiO2系玻璃陶瓷之特性探討

傅育棋; Fuh, Yuh-chyi ,  2007
[化學工程與材料工程學系暨研究所] 學位論文
edition, 2003. [21] J. Terence Maloney, “Glass in the modern world: A study in materials development”, Aldus, 1967. [22] Horst Scholze, Glass: Nature

23128.  凝膠衍生TiO2粉體與薄膜之光催化及光電性質探討

胡發鈞; Hu, Fa-chun ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
, which improved its efficiency about 363%. The use of the TiO2 thin film with P-N junction in DSSC device could improve the photovoltaic efficiency

23129.  溶膠凝膠法製備紫外光硬化型抗眩鍍膜

陳建銘; Chen, Chien-ming ,  2007
[化學工程與材料工程學系暨研究所] 學位論文
material. We controlled the composition of reactants (TEOS, HCl, DPHA, MSMA) and reaction time to study their relations and their effects on optical

23130.  雜多酸觸媒之製備與酸性鑑定

楊芷宜; Yang, Chih-yi ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
from weak silanol groups of the silica support. The qualitative and quantitative results obtained from this study not only provoke further understanding

23131.  操作條件對酵母菌/牛血清蛋白雙成份懸浮液之掃流微過濾性能之影響

黃信杰; Hwang, Hsin-chieh ,  2005
[化學工程與材料工程學系暨研究所] 學位論文
過濾基本公式和力平衡方程式，推導一擬穩定濾速與操作條件的關係式。並根據濃度極化模式、深層過濾之粒子標準捕獲方程式，再考慮剪應力對巨分子運動的影響，進而得到一理論式，藉由此理論式子來估計巨分子之阻擋率，所得到的估計值符合實驗趨勢。 In this study, yeast cells are used

23132.  聚胺基甲酸酯-奈米金奈米複合材料結晶行為研究

張崇學; Chang, Chung-hsueh ,  2007
[化學工程與材料工程學系暨研究所] 學位論文
which used blend method to prepare the polymer-nanogold composites were the low content of GNPs, in this study the chemical bonding between

23133.  Joint deployment, repairing and broadcasting algorithms for wireless sensor networks with obstacles

張栩瑞; Chang, Hsu-ruey ,  2007
[資訊工程學系暨研究所] 學位論文
or environmental influence, and hence result in the WSN coverage-loss. In literature, a number of study developed robot deployment algorithms that aim

23134.  The study of efficient password authenticated key agreement protocol for multi-servers

蕭勝華; Shiau, Sheng-hua ,  2007
[資訊工程學系暨研究所] 學位論文
淡江大學資訊工程學系博士班 黃仁俊; Hwang, Ren-junn 蕭勝華 Shiau, Sheng-hua The study of efficient password authenticated key agreement protocol for multi-servers 適用於多伺

23135.  Analysis and modeling of communication networks

林政錦; Lin, Cheng-chin ,  2007
[資訊工程學系暨研究所] 學位論文
. The proposed network models use the concept of social affinity to capture the closeness property presented in real world networks. Usually, network properties

23136.  Lossy compression-tolerant data hiding

高泉合; Kao, Chuan-ho ,  2005
[資訊工程學系暨研究所] 學位論文
compression image in the public internet. When people use our method, the receiver can extracts complete data correctly from the lossy compression

23137.  A statistical approach to boundary-based corner detection

陳俊文; Chen, Chun-wen ,  2009
[資訊工程學系暨研究所] 學位論文
. Wu, “A case study: Passive component inspection using a 1D wavelet transform,” International Journal of Advanced Manufacturing Technology, vol.22

23138.  Using web service architecture to construct cross domain framework for SCORM platform

林修名; Lin, Nigel H. ,  2005
[資訊工程學系暨研究所] 學位論文
International Conference on e-Technology, e-Commerce and e-Service, Mar. 28-31, 2004, 42-45 Guo L., Xiang X., & Shi Y. (2004) Use Web Usage Mining

23139.  拍翼式微飛行器之設計、製造與測試整合

徐振貴; Shu, Cheng-kuei ,  2008
[機械與機電工程學系暨研究所] 學位論文
) A computational fluid dynamic study of hawkmoth hovering. Journal EXP. Biol. 201, 461-477. Madangopal, R., Khan Z. A. and Agrawal, S. K. (2005

23140.  圓管挫曲式微型閥門之研製

劉冠君; Liu, Kuan-chun ,  2006
[機械與機電工程學系暨研究所] 學位論文
photolithography into the parylene C process to fabricate a test module for feasibility study and a biomimic driving module of the buckled-type valve

23141.  矽基材表面性狀對奈米碳管成長機制影響之研究

許家偉; Hsu, Chia-wei ,  2007
[機械與機電工程學系暨研究所] 學位論文
of Adhesives 24 (2004) pp. 171-177 【45】 H. Krump, M. Simor, I. Hudec, M. Jasso, A.S. Luy, “Adhesion strength study between plasma treated polyester fibers

23142.  以反應離子蝕刻製作鑽石微結構之研究

廖仁誠; Liao, Ren-cheng ,  2009
[機械與機電工程學系暨研究所] 學位論文
. The etching parameters and the forming mechanism of microstructures were investigated in this study. Field emission scanning electron microscope

23143.  染料敏化太陽能電池組成及性質分析

莊家昌; Chuang, Chia-cheng ,  2008
[機械與機電工程學系暨研究所] 學位論文
度達1 mm，因此大多數的光電子會被不鏽鋼片吸收，因而降低了轉換效率。 In this study, the silver gird was made by printing method with silver paste on the ITO glass. The mesoporous

23144.  聚甲基丙烯酸甲酯/二氧化錫奈米複合材料製造及性質

馮棋源; Feng, Chi-yuan ,  2007
[機械與機電工程學系暨研究所] 學位論文
度及伸長率隨潛溶劑濃度增加而減少，且隨質傳溫度上升而遞減；而脆性拉伸破壞面型態比率、硬度(Hs)及玻璃轉換溫度(Tg)，則隨質傳溫度及潛溶劑濃度增加而上升。 The study investigats the mass transport and hydrolysis behavior

23145.  以互補式金氧半標準積體電路製程及後加工程序製作50微米尺寸之力感測器

許竣為; Hsu, Chun-wei ,  2005
[機械與機電工程學系暨研究所] 學位論文
by polysilicon. To release the membranes of micro pressure sensors, this work proposes to use the front-side etching technique with etching holes of 5μm

23146.  撞球機器人之跳球決策系統設計

陳宥穆; Chen, You-mu ,  2009
[機械與機電工程學系暨研究所] 學位論文
. 370-375. [5] H. Nakama, I. Takaesu and H. Tokashiki, “Basic Study on Development of Shooting Mechanism for Billiard Robot,” JSME, Robotic Workshop

23147.  開關式磁阻馬達自軸承控制

劉威廷; Liu, Wei-ting ,  2005
[機械與機電工程學系暨研究所] 學位論文
. 2003, pp.1203-1207. [26]S.K. Mondal, S.N. Bhadra, and S.N. Saxena, “Application of current-source converter for use of SRM drive in transportation area

23148.  臺灣周邊國家CNS/ATM發展現況

洪嘉薇; Hung, Chia-wei ,  2007
[航空太空工程學系暨研究所] 學位論文
in the future. This study collects the surrounding information around Taiwan to help establish the CNS/ATM system in the Taipei Flight Information

23149.  高頻磁場電源供應器之設計

塗家銘; Tu, Chia-ming ,  2006
[電機工程學系暨研究所] 學位論文
signals by FPGA embedded chip and VHDL to change the work period of the output voltage and control frequency. Finally, this study used Is-Spice

23150.  使用動態偏壓電路之低功率三角積分調變器於音頻之應用

李宜昇; Lee, Yi-sheng ,  2007
[電機工程學系暨研究所] 學位論文
) converters play an important role in the application of the audio systems. We use the over-sampling and noise shaping techniques to complete the Sigma