6911.  銷貨收入、盈餘與股利資訊對股價之影響 : 互補或替代效果

林佑宗; Lin, Yu-tsung ,  2006
[Graduate Institute & Department of Accounting] Thesis
. This research uses data from year 1996 to 2004 in U.S security market and develops two methods for the study purpose: cross-sectional regression and event

6912.  以非合作賽局求解最佳公共停車場費率

吳國群; Wu, Kuo-chun ,  2005
[Graduate Institute & Department of Transportation Management] Thesis
. Therefore, the conditions of traffic congestion and parking space shortage are more deteriorated. Although the most effective mean to reduce the use

6913.  資訊系統軟硬體整合之研究 : 以政府機關B單位為例

林以函; Lin, Yi-han ,  2006
[Graduate Institute & Department of Information Management] Thesis
淡江大學資訊管理學系碩士班 黃明達; Hwang, Ming-dar 林以函 Lin, Yi-han 資訊系統軟硬體整合之研究 : 以政府機關B單位為例 A study of information system integration for software and hardware

6914.  從BOT案論公共工程與民眾陳情案件之處理 : 以台灣南北高速鐵路為例

簡豐昱; Chien, Feng-yu ,  2006
[Graduate Institute & Department of Civil Engineering] Thesis
projects : an empirical study on Taiwan high-speed rail project 陳情案件,民眾陳情;pleading cases,people state 民主社會中，民眾勇於表達意見爭取自身利益是多元化民主體制中之常態運作。民眾於傳統由政府辦理工程中，如認為

6915.  全球化下物質性與非物質性之流動關係 : 以馬山地區為研究對象

曾建瑋; Tseng, Jian-wei ,  2009
[Graduate Institute & Department of Architecture] Thesis
. This study includes the following content： First part of deduction： The flow investigated in this study is under the structure of materiality phenomenon

6916.  太陽能平板型氣隔式薄膜蒸發器理論與實驗分析之研究

王柏翔; Wang, Po-hsiang ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and the productivity of pure water are discussed in this study. The theoretical results indicate that the pure water productivity increases with increasing

6917.  知識管理之知識的獲得之研究

沈宏明; Shen, Hung-ming ,  2006
[Graduate Institute & Department of Computer Science and Information Engineering] Thesis
淡江大學資訊工程學系碩士在職專班 莊淇銘; Chung, Chi-ming 沈宏明 Shen, Hung-ming 知識管理之知識的獲得之研究 The study of the knowledge acquisition of the knowledge management 知識管理;知識獲得

6918.  金屬板材方杯深引伸成形極限之動顯函有限元素分析

鄧維明; Teng, Wei-ming ,  2006
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
大小依序為C=1.25t、C=2.19t、C=1.56t、C=1.1t、C=1.08t。數值分析之結果皆可合理的模擬實驗結果，故本動顯函有限元素分析程式可合理的預測方杯引伸成形極限。 The objective of this study was to analyze the forming

6919.  渦流對三維背階流效應探討

蘇士傑; Su, Shih-jie ,  2007
[Graduate Institute & Department of Aerospace Engineering] Thesis
, the secondary flow and the turbulent kinetic energy; (3) the heat transfer distributions on the heat-transfer surface. Results of this study show

6920.  多階段拓樸最佳化於結構外型設計之研究

林晉民; Lin, Chin-min ,  2006
[Graduate Institute & Department of Aerospace Engineering] Thesis
望本研究應用到工業界實際的結構設計問題時，可提供製造上之便利性。 A system including finite element analysis, optimization method and topological design was developed in this study