24981.  台灣之社區建築運動的歷史與社會作用分析

曾旭正 ,  2000
[Graduate Institute & Department of Architecture] Research Paper
※※※※※※※※※※※※※※※※※※※※※※※※※ ※ ※ ※ 台灣之社區建築運動的歷史與社會作用分析 ※ ※ A Study on the History and Social Effect

24982.  精密固液分離在高科技產業之應用-精密製程中微過濾與高速離心分離機構之研究(I)

黃國楨 ,  2003
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
cake. A theoretical model is derived in this study. The pseudo-steady filtration rate and protein rejection can be predicted using the proposed model

24983.  膜過濾結垢機制及預防之研究-改變掃流膜過濾之流力行為以延緩結垢之研究(I)

吳容銘 ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
Simulation Study of Sludge Blanket Clarifier 報告內容應包括下列各項： 一、參加會議經過 本次在國科會補助下，於 5 月 3 日（三）由台北搭乘長榮航空公司 BR0061 班機赴 奧地利維也納參加由維也納科技大學(Vienna

24984.  膜過濾結垢機制及預防之研究-無機膜過濾蛋白質溶液之結垢現象與濾速回復(I)

鄭東文 ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
，這是因為 BSA 粒子形成之極化層緊密度 不同所致。因此，選擇適當 pH 值可將 BSA 溶液中之小分子進行分離。 關鍵詞：奈米過濾、薄膜結垢、蛋白質、濾 速回復 Abstract In this study, the inorganic tubular membranes (1000

24985.  聚1,1-二氟乙烯摻合體的相形態結構與界面相容性之研究

林達鎔 ,  2001
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
blends, which were used in turn to prepare dense films by drying method. Electron microscopy was employed to study bi-continuous phases morphology

24986.  精密固液分離在高科技產業之應用-精密製程中微過濾與高速離心分離機構之研究(II)

黃國楨 ,  2004
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
which contain yeast and BSA are separated using cross-flow microfiltration and centrifugal filtration in this study. In cross-flow microfiltration

24987.  迴流效應於管板式太陽能集熱器效率改善

何啟東 ,  2004
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
集熱器、對流係數、長寬比、外部迴流、集熱器效率 英文摘要 The study presents a theoretical prediction of the performance of a sheet-and-tube solar water heater with external

24988.  精密固液分離在高科技產業之應用-子計畫七：次微米粒子聚集機制與其結構之研究

吳容銘 ,  2004
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
淡江大學化學工程與材料工程學系 吳容銘 精密固液分離在高科技產業之應用-子計畫七：次微米粒子聚集機制與其結構之研究 Study of Flucculation Kinetics and Structure of Sub-Micron Particles 聚集體;次微米;光散射;沈降;結構

24989.  基於族群馬可夫鏈之分群技術

林慧珍; 顏淑惠 ,  2005
[Graduate Institute & Department of Computer Science and Information Engineering] Research Paper
can be eliminated. In the clustering procedure, the center candidates of the clusters are taken from the data set, so that we can use binary

24990.  海關資料分類系統

蔣定安 ,  2005
[Graduate Institute & Department of Computer Science and Information Engineering] Research Paper
models from the already classified data; the other is to use the classification models to categorize from the unclassified data [1, 2, 4, 6, 7, 8]. We

24991.  適用於無線感測網路的密鑰管理技術之研究

黃仁俊 ,  2005
[Graduate Institute & Department of Computer Science and Information Engineering] Research Paper
淡江大學資訊工程學系 黃仁俊 適用於無線感測網路的密鑰管理技術之研究 The Study of Key Management System for Wireless Sensor Network 網路安全;無線感測網路;無線通訊安全;密鑰管理;密鑰分配;資訊安全;對稱式密碼系統 隨著無線傳輸技術

24992.  紊流反應流之機率密度函數模式研究

洪祖昌 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
number flows, it can be expected, from a rough use of the Central Limit Theorem, that the fluctuation of momentum due to the pressure force can

24993.  微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III)

康尚文 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 康尚文 微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III) The Study on Packaging and Testing of Micro Coolers(III) 封裝;測試;微冷卻器;Packaging;Testing;Micro

24994.  次微米顆粒型鋁基複合材料之熔煉鑄造暨機械性質之研究

林清彬 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 林清彬 次微米顆粒型鋁基複合材料之熔煉鑄造暨機械性質之研究 A Study on Manufacturing and Properties of Submicro Particulate Reinforced Aluminum Alloy 2000 行政院國家科學委員

24995.  微冷卻器之整合研究-子計畫II:微冷卻器之製程技術研究(III)

楊龍杰 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
., “Fabrication and characterization of a microsystem for a micro-scale heat transfer study”, J. Micromech.. Microeng., 9(4), pp.422-428, 1999. [11

24996.  微冷卻器之整合研究-子計畫I：微冷卻器之熱流技術研究

杜文謙 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I：微冷卻器之熱流技術研究 The Study on Thermal and Fluid Technology of Micro Coolers 微冷卻器;微流道;微熱管;流場可視化;Microcooler;Microchannel

24997.  盲用中文點字顯示方固定座改良與模具設計分析

葉豐輝; 蔡慧駿 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
Cell frame's injection molding processing parameters on the products' filling, cooling and warpage will be studied. During the study, the computer

24998.  微機電順從機構的拓樸最佳化及設計(I)

史建中 ,  2002
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
as a Low Volume Fraction Limit of the Perforated Plate Topology Optimization Problem: an Asymptotic Study", Structural Optimization, Vol. 6

24999.  微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III)

杜文謙 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III) The Study on Thermal and Fluid Technology of Micro Coolers(III) 熱流;微冷卻器;Thermal fluid technology

25000.  低成本氣象衛星及其星系之關鍵技術研究-總計畫(II)

洪祖昌; 陳裕愷 ,  2004
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 洪祖昌 陳裕愷 低成本氣象衛星及其星系之關鍵技術研究-總計畫(II) Design and Fabrication Study of The Low-Cost Weather Satellite and It's Constellation(II) 2004 行政院國

25001.  金屬成形極限之三維有限元素分析軟體開發與整合應用-子計畫二：金屬板材深引伸成形極限之三維有限元素分析(III)

李經綸; 葉豐輝 ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
A Study of forming limit in deep drawing process of metal sheet by the 3-D FEM analysis 計畫類別：□ 個別型計畫 ■ 整合型計畫 計畫編號：NSC 94－2212－E－032－001 執行期間：92 年 08

25002.  智慧型微冷卻系統之熱流技術研究(I)

杜文謙 ,  2002
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 杜文謙 智慧型微冷卻系統之熱流技術研究(I) The Study on Thermal and Fluid Technology in Smart Micro-Cooling System(I) 2002 行政院國家科學委員會 http

25003.  利用微小型衛星編隊飛行搭配干涉攝影技術應用於地球科學之研究

蕭富元 ,  2005
[Graduate Institute & Department of Aerospace Engineering] Research Paper
by a single spacecraft. A more efficient way to perform interferometric imagine is the usage of spacecraft formation. Results of this study will contribute

25004.  結構之風力載重及受風反應(I)-子計畫III：計算風工程中空氣動力特性之研究

李世鳴 ,  2002
[Graduate Institute & Department of Aerospace Engineering] Research Paper
淡江大學航空太空工程學系 李世鳴 結構之風力載重及受風反應(I)-子計畫III：計算風工程中空氣動力特性之研究 The Study of Aerodynamics Characteristics in Computational Wind Engineering 2002 行政院國家科學委員會

25005.  風扇流中渦流產生器對流場結構及熱傳增益影響之探討

陳增源 ,  2002
[Graduate Institute & Department of Aerospace Engineering] Research Paper
] studied the heat transfer enhancement on plate fin surfaces on which local vortex generators produced a set of contra-rotating vortices. Their study