51.  The Zeroth Order Solution of the Velocity Field around Micro Comb Structures with Lateral Oscillation

李其源; Lee, Chi-yuan; 楊龍杰; Yang, Lung-jieh; 陳炳煇; Chen, Ping-hei ,  2002-01
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Journal of the Chinese Institute of Engineers=中國工程學刊 25(1), pp.57-65
淡江大學機械與機電工程學系 李其源 Lee, Chi-yuan 楊龍杰 Yang, Lung-jieh 陳炳煇 Chen, Ping-hei The Zeroth Order Solution of the Velocity Field around Micro Comb Structures

52.  微梳狀結構之滑動黏滯及擠壓效應之數值研究

陳慶祥 ,  2004-12
[Graduate Institute & Department of Aerospace Engineering] Proceeding
中國航空太空學會第四十六屆年會暨會員大會、2004航太學會/民航學會聯合學術研討會、國科會航太學門專題研究計畫成果發表會、教育部航太科技教育改進計畫成果發表會論文集，8頁
淡江大學航空太空工程學系 陳慶祥 Chen, Ching-Shung 微梳狀結構之滑動黏滯及擠壓效應之數值研究 Numerical Study of Slip, Viscous and Squeezing Effects on Micro Comb Drives 微梳狀制動器;微梳狀結構;擠壓阻

53.  微冷卻器之整合研究-總計畫(III)

康尚文; 杜文謙; 楊龍杰 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 康尚文 杜文謙 楊龍杰 微冷卻器之整合研究-總計畫(III) Integrated Research on Micro Coolers(III) 微冷卻器;整合研究;Micro cooler;Integrated research 2001 行政院國家科學委員會

54.  微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III)

康尚文 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 康尚文 微冷卻器之整合研究-子計畫III:微冷卻器之封裝測試研究(III) The Study on Packaging and Testing of Micro Coolers(III) 封裝;測試;微冷卻器;Packaging;Testing;Micro

55.  微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III)

杜文謙 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 杜文謙 微冷卻器之整合研究-子計畫I:微冷卻器之熱流技術研究(III) The Study on Thermal and Fluid Technology of Micro Coolers(III) 熱流;微冷卻器;Thermal fluid technology

56.  TUUSAT-1A微衛星系統功能模擬驗證軟體整合與分析

王裕淵; Wang, Yu-yuan ,  2008
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
for micro-satellite, TUUSAT-1A 微衛星;模擬器;系統設計;Micro-satellite;Simulator;system design 本文主要是針對TUUSAT-1A微衛星之細部設計，使用系統驗證軟體TUUSIM(TUUSAT-1A SIMulator)對任務做模擬分析

57.  TUUSAT-1A微衛星熱控系統設計與分析

李世維; Li, Shih-wei ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 洪祖昌; Hong, Zuu-chang 李世維 Li, Shih-wei TUUSAT-1A微衛星熱控系統設計與分析 The design and analysis of thermal control system for micro-satellite

58.  具有完整資料傳遞與預充電時間形式之新型非同步控制電路

蕭輔彥; Hsiao, Fu-yen ,  2007
[Graduate Institute & Department of Electrical Engineering] Thesis
and precharge-time scheme 非同步電路;開根號器;Asynchronous control;DCVSL;Micro-pipeline;Square root 在這篇論文裡，我們提出了一種可實行在非同步應用上的控制電路，叫做CDPC (Complete Data and Precharge

59.  A new mobile payment scheme for roaming services

Ren-junn Hwang; Sheng-hua Shiau; Ding-Far Jan ,  2007
[Graduate Institute & Department of Computer Science and Information Engineering] Journal Article
Electronic Commerce Research and Applications 6(2), 頁184-191
淡江大學資訊工程學系 Ren-junn Hwang Sheng-hua Shiau Ding-Far Jan A new mobile payment scheme for roaming services Elsevier Micro-payment; Mobile payment

60.  Performance Testing of Micro Loop Heat Pipes

Hsu, Chin-chun; 康尚文; Kang, Shung-wen; Hou, Tung-fu ,  2005-06-01
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
淡江理工學刊=Tamkang Journal of Science and Engineering 8(2), pp.123-132
淡江大學機械與機電工程學系 Hsu, Chin-chun 康尚文 Kang, Shung-wen Hou, Tung-fu Performance Testing of Micro Loop Heat Pipes 淡江大學 Micro Loop Heat Pipes; Two Phase

61.  Topological optimum design of a compliant mechanism for planar optical modulator

Lin, C. F; Shih, C. J. ,  2002-09-01
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
淡江理工學刊=Tamkang journal of science and engineering 5(3), pp.151-158
; Compliant Mechanism; Structural Optimization; Micro-Electro Mechanical Structure; Engineering Design; Computer-Aided Design The rotator type of optical

62.  Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

楊勝明; Yang, Sheng-ming; 林逢傑; Lin, Feng-chieh; Chen, Ming-tsung ,  2004-09
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
IEEE Transactions on Industry Applications 40(5), pp.1257-1264
淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming 林逢傑 Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase

63.  Micro-stepping control of a two-phase linear stepping motor with three-phase VSI inverter for high-speed applications

楊勝明; Yang, Sheng-ming; Lin, Feng-chieh; Chen, Ming-tsung ,  2003-10-14
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the (Volume:1 ), pp.473-479
淡江大學機械與機電工程學系 楊勝明 Yang, Sheng-ming Lin, Feng-chieh Chen, Ming-tsung Micro-stepping control of a two-phase linear stepping motor with three-phase VSI

64.  微切削之毛邊形成機制之探討

賴炳宏; Lai, Ping-hung ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 賴炳宏 Lai, Ping-hung 微切削之毛邊形成機制之探討 Study on burr formation in micro-cutting process 精密元件;微切削;毛邊;Precision

65.  模擬軟體TUUSIM於TUUSAT-1A微衛星驗證與應用

汪揚名; Wang, Yang-ming ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
of TUUSAT-1A 微衛星;模擬器;系統設計;Micro-satellite;Simulator;system design 本文主要是針對TUUSAT-1A微衛星之細部設計，使用系統驗證軟體TUUSIM(TUUSAT-1A SIMulator)對任務各個子系統做模擬分析。由

66.  Micro Fuse Fabrication and Testing

康尚文; Kang, Shung-wen; Chen, Yu-tang; 許欽淳; Hsu, Chin-chun; 林俊偉; Lin, Jun-wei ,  2007-06
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
淡江理工學刊=Tamkang journal of science and engineering 10(2)，頁173-176
淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen Chen, Yu-tang 許欽淳 Hsu, Chin-chun 林俊偉 Lin, Jun-wei Micro Fuse Fabrication and Testing 臺北縣：淡江大學 Micro copper fuse

67.  The manufacture and test of (110) orientated silicon based micro heat exchanger

康尚文; Kang, Shung-wen; 張廣祥; Chang, Guang-shang; Chen, Yu-Tang ,  2002-09
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
淡江理工學刊=Tamkang journal of science and engineering 5(3)，頁129-136
淡江大學機械與機電工程學系 康尚文 Kang, Shung-wen 張廣祥 Chang, Guang-shang Chen, Yu-Tang The manufacture and test of (110) orientated silicon based micro heat

68.  Weight Reduction of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining

Yang, Lung-Jieh; Hsu, Cheng-Kuei; Kao, Chung-Yu; Hsiao, Fu-Yuen; Feng, Chao-Kung ,  2009-09
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Journal of Aeronautics, Astronautics and Aviation Series A 41(3), pp.165-172
of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining 利用放電線切割加工進行拍翼式飛行器之減重 桃園縣：中華民國航空太空學會 Micro aerial vehicle(MAV); Flapping; Electrical

69.  Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle

Yang, Lung-jieh; Hsu, Cheng-kuei; Ho, Jen-yang; Feng, Chao-kang ,  2007-04-09
[Graduate Institute & Department of Aerospace Engineering] Journal Article
Sensors and Actuators A: Physical 139(1-2), pp.95-103
of a micro aerial vehicle 以具壓電感測器之拍翼改善微飛行器之空氣動力 Lausanne: Elsevier MAV (micro aerial vehicle); Flapping wing; Parylene; On-site lift; PVDF (polyvinyliden

70.  Micro-viscometer based on electrowetting on dielectric

Lin, Yan-you; Lin, Chi-wann; 楊龍杰; Yang, Lung-jieh; Wang, An-bang ,  2007-02-10
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Electrochimica Acta 52(8), pp.2876-2883
淡江大學機械與機電工程學系 Lin, Yan-you Lin, Chi-wann 楊龍杰 Yang, Lung-jieh Wang, An-bang Micro-viscometer based on electrowetting on dielectric Elsevier

71.  拍翼式飛行器之微小化改良

陳羿韶; Chen, Yi-Shao ,  2011
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 楊龍杰 陳羿韶 Chen, Yi-Shao 拍翼式飛行器之微小化改良 The improvement on the miniaturization of flapping micro aerial vehicles 微飛行器;拍翼;微小化;Micro

72.  Micro-Cap在數值分析上的應用

呂墩棖; Lu, Tun-Chang ,  2011
[Graduate Institute & Department of Electrical Engineering] Thesis
淡江大學電機工程學系碩士班 余繁 呂墩棖 Lu, Tun-Chang Micro-Cap在數值分析上的應用 The application of micro-cap in numerical analysis 微分方程式;線性;非線性;Micro-Cap;Numerical analysis

73.  The micro-air-vehicle Golden Snitch and its figure-of-8 flapping

Yang, Lung-Jieh ,  2012-09
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
淡江理工學刊 15(3), p.197-212
淡江大學機械與機電工程學系 Yang, Lung-Jieh Yang, Lung-Jieh The micro-air-vehicle Golden Snitch and its figure-of-8 flapping 淡江大學 Figure-of-8;Micro-Air-Vehicle

74.  Design and fabrication of light weight current collectors for direct methanol fuel cells using the micro-electro mechanical system technique

Sung, Min-Feng; Kuan, Yean-Der; Chen, Bing-Xian; Lee, Shi-Min ,  2011-07
[Graduate Institute & Department of Aerospace Engineering] Journal Article
Journal of Power Sources 196(14), pp.5897-5902
for direct methanol fuel cells using the micro-electro mechanical system technique Lausanne: Elsevier S.A. Direct methanol fuel cell; Thermal evaporation

75.  Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted Blades

Chen, T. Y.; Hung, C. W.; Liao, Y. T. ,  2013-09-01
[Graduate Institute & Department of Aerospace Engineering] Journal Article
Journal of Mechanics 29(3), pp.N15-N20
淡江大學航空太空工程學系 Chen, T. Y. Hung, C. W. Liao, Y. T. Chen, T. Y. Experimental Study on Aerodynamics of Micro-Wind Turbines with Large-Tip non-Twisted