淡江大學機構典藏

191.  440C不鏽鋼金屬微熱壓模造之燒結研究

張佐銘; Chang, Tso-ming ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
造;微深孔成型;微結構成型;Taguchi method;Sintering;Metal hot emboss molding;Micro-hole;Microstructure 本文係利用金屬粉末成型料之可熱塑成型優點，與粉末冶金燒結技術，發展金屬粉末熱壓模造技術。本實驗第一部份使用田口式實驗設計

192.  電液體驅動式微幫浦及其應用

王俊民; Wang, Jiun-min ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
苯;明膠;螺旋;微推進器;micropump;electrohydrodynamic(EHD);ITO;parylene;gelatin;spiral;micro-boat 電液體幫浦驅動過程中，伴隨著電解水的產生，一直難以規避；其所帶來的影響即是驅動電極的變質，而導致電液體微幫浦無法長時間運作。因

193.  微衛星軟體通訊系統整合與測試及應用智慧代理人於衛星通訊任務自主運作模擬

蘇建成; Suo, Chien-cheng ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
system and the application of intelligent agent for autonomous mission operation simulation 微衛星;通訊子系統;衛星地面站;天線展開機構;智慧代理人;micro-satellite;communication

194.  微小圓杯引伸成形分析與料片最佳化之研究

陳世傑; Chen, Shih-chieh ,  2006
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 葉豐輝; Yeh, Fung-huei 陳世傑 Chen, Shih-chieh 微小圓杯引伸成形分析與料片最佳化之研究 Study of formability analysis in cylindrical micro cup drawing

195.  微小鑽石砂輪之研製

羅瑞興; Lo, Jui-hsin ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-lii 羅瑞興 Lo, Jui-hsin 微小鑽石砂輪之研製 Design and fabrication of a micro-diamond wheel 微小鑽石砂輪;紫外光固化樹脂;結合劑;紫外光;鑽石磨粒;micro

196.  微落膜反應器之模擬研究

李協聰; Li, Hsieh-hsung ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 張煖; Chang, Hsuan 李協聰 Li, Hsieh-hsung 微落膜反應器之模擬研究 Simulation study of micro falling film reactors 微落膜反應器;多相流;CFD;VOF model;接觸角度;膜厚

197.  應用連體損傷力學於微金屬板材拉伸斷裂之研究

蔡傑丞; Tsai, Jie-cheng ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 葉豐輝 蔡傑丞 Tsai, Jie-cheng 應用連體損傷力學於微金屬板材拉伸斷裂之研究 A study of tensile fracture in micro sheet metal forming by using continuum damage

198.  碎形明膠微圖案新穎製程之研究

李佳展; Lee, Chia-chan ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 楊龍杰; Yang, Lung-jieh 李佳展 Lee, Chia-chan 碎形明膠微圖案新穎製程之研究 Study on the novel fabrication of micro fractal patterns on gelatin 明膠;鹽析;碎形

199.  以熱重熔法結合反應離子蝕刻製程製作鑽石微結構之研究

蘇煒哲; Su, Wei-jhe ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 趙崇禮 蘇煒哲 Su, Wei-jhe 以熱重熔法結合反應離子蝕刻製程製作鑽石微結構之研究 Fabrication of micro-structures on CVD diamond film by thermal reflow and RIE

200.  微金屬箔片伸張凸緣微成形與預成形最佳化料片設計之研究

葉豐輝; 李經綸 ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 葉豐輝 李經綸 微金屬箔片伸張凸緣微成形與預成形最佳化料片設計之研究 Study on Stretch Flange Micro Forming and Optimum Blank Design of Micro Metal Foil 伸張凸緣微成形; 尺寸效應; 有

201.  應用微技術之燃料電池燃料處理系統的模擬分析與最佳化(I)

張煖; 陳逸航 ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Research Paper
料電池; 微燃料處理系統; 計算流體力學; 甲醇; 蒸汽重組; 氫氣; Fuel cell; Micro fuel processor; Computational fluid dynamics; Methanol; Steam reforming; Hydrogen 質子交換膜燃料電池作為可攜式電

202.  板翅式微裝置之模擬分析與最佳化設計

施偉晨; Shih, Wei-Chen ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 張煖; Chang, Hsuan 施偉晨 Shih, Wei-Chen 板翅式微裝置之模擬分析與最佳化設計 Simulation analysis and optimal design of micro plate-fin devices 微反應器;微熱交換

203.  「淡江金探子」拍翼機之研製

楊龍杰; Yang, Lung-jieh; 蕭富元; Hsiao, Fu-yuen; 馮朝剛 ,  2012-09
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding, [Graduate Institute & Department of Aerospace Engineering] Proceeding
第八屆海峽兩岸航空太空學術研討會論文集
;Flapping micro air vehicle (MAV);lift lag of the flapping wing pair, figure-of-8 本文回顧淡江大學自2003年以來發展之「淡江金探子」拍翼機研製歷程。「淡江金探子」翼展20公分，總質量10克以下，使用可充電式鋰聚合物電池提供

204.  空氣黏滯效應在側向振動梳狀微結構之研究

鄒佳芬; Chou, C. F.; 陳慶祥; Chen, C. S.; 楊龍杰; Yang, L. J. ,  2001-05
[Graduate Institute & Department of Aerospace Engineering] Proceeding, [Graduate Institute & Department of Electrical Engineering] Proceeding
第三屆海峽兩岸航空太空學術研討會論文集，頁45-49
in Laterally Oscillating Micro Comb Structures 臺北縣：淡江大學 加速度計;微梳狀結構;空氣黏滯效應;流場;空氣動力學Accelerometer;Micro Comb Structure;Viscous Air Damping Effect;Flow Field

205.  中學教師微型創業歷程中跨行創業成功關鍵因素之研究

林珈吉; Lin, Chia-Chi ,  2012
[Graduate Institute & Department of Business Administration] Thesis
淡江大學企業管理學系碩士在職專班 洪英正; 張敬珣 林珈吉 Lin, Chia-Chi 中學教師微型創業歷程中跨行創業成功關鍵因素之研究 The key success factors of cross-industry micro-entrepreneurship : a case study

206.  電解銅箔與壓延銅箔於精微方杯深引伸製程之成形極限分析

林冠良; Lin, Guan-Liang ,  2012
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
and rolled copper foil in micro square-cup deep drawing process 動顯函有限元素法;精微方杯深引伸;成形極限;Dynamic-explicit finite element method;Micro square-cup deep

207.  壓延銅箔於U型精微彎曲之回彈分析

張郡漢; Chang, Chun-Han ,  2012
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 李經綸; Li, Ching-Lun 張郡漢 Chang, Chun-Han 壓延銅箔於U型精微彎曲之回彈分析 The analysis of springback of rolled copper foil in the U-shaped micro

208.  微型風力發電機外罩與葉片效應之空氣動力特性探討

洪呈緯; Hung, Cheng-Wei ,  2012
[Graduate Institute & Department of Aerospace Engineering] Thesis
淡江大學航空太空工程學系碩士班 陳增源; Chen, Tseng-Yuan 洪呈緯 Hung, Cheng-Wei 微型風力發電機外罩與葉片效應之空氣動力特性探討 Investigation of aerodynamics characteristics of micro wind

209.  Dynamics of Flapping Micro-Aerial Vehicles

楊澤明; 蕭富元 ,  2008-12
[Graduate Institute & Department of Aerospace Engineering] Proceeding
中華民國航空太空學會第五十屆年會暨學術研討會國科會航太學門成果發表會會議首冊暨論文摘要集，頁113
淡江大學航空太空工程學系 楊澤明 蕭富元 Yang, T.-M. Hsiao, F.-Y. Dynamics of Flapping Micro-Aerial Vehicles 拍翼式微飛行器之動力學分析 臺北市：中華民國航空太空學會 Flapping wing;Micro aerial

210.  微電影中之代言人與品牌之配置性對廣告效果之研究

林怡寰; Lin, Yi-Huan ,  2013
[Graduate Institute & Department of Business Administration] Thesis
淡江大學企業管理學系碩士班 李月華; 趙慕芬 林怡寰 Lin, Yi-Huan 微電影中之代言人與品牌之配置性對廣告效果之研究 Study of advertising effect for consisitency between endorser and brand in Micro

211.  仿生蜂鳥微型飛行器機構運動分析

王勝弘; Wang, Sheng-Hong ,  2013
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 劉昭華 王勝弘 Wang, Sheng-Hong 仿生蜂鳥微型飛行器機構運動分析 Kinematic analysis of a hummingbird-like micro-aerial-vehicle mechanism 微飛行器;簡化機構;瓦特四連桿直線機

212.  星形流道矽質微熱管之研製與測試

康尚文; 黃德麟 ,  2000-05
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
第一屆海峽兩岸微系統科技研討會論文集，頁188-193
淡江大學機械與機電工程學系 康尚文 黃德麟 星形流道矽質微熱管之研製與測試 Fabrication and Test of Silicon Star Channels Micro Heat Pipe 微熱管;星形流道;毛細作用;散熱;電子元件;微機電製程技術;Micro Heat Pipe

213.  電子元件之微熱沉最佳化設計

陳至行; 史建中 ,  2000-05
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
第一屆海峽兩岸微系統科技研討會論文集，頁214-218
淡江大學機械與機電工程學系 陳至行 史建中 電子元件之微熱沉最佳化設計 最佳化;基因演算法;微流道散熱座;熱傳遞;微加工;電子封裝;Optimization;Genetic Algorithm;Micro Channel Heat Sink;Heat Transfer;Micromaching

214.  金屬薄膜擴散接合之應用─微型熱交換器之 製造

康尚文 ,  1994-07
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
超塑性成形與擴散接合學術研討會論文集，頁333-338
淡江大學機械與機電工程學系 康尚文 Kang, Shung-Wen D. 金屬薄膜擴散接合之應用─微型熱交換器之 製造 Application of Metal Foils Diffusion Bonding---Fabrication of Micro Heat Exchanger 微型熱交換

215.  探討反媒體壟斷微電影之廣告效果

劉智瑋; Liu, Zhi-Wei ,  2014
[Graduate Institute & Department of International Business] Thesis
淡江大學國際企業學系碩士班 孫嘉祈; Sun, Chia-Chi 劉智瑋 Liu, Zhi-Wei 探討反媒體壟斷微電影之廣告效果 Exploring advertising effect of micro film on anti-media monopoly 非營利組織;反媒體壟斷;微電影

216.  整合異質材料與製程之微轉子引擎研製

何柏緯; Ho, Po-Wei ,  2014
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 楊龍杰 何柏緯 Ho, Po-Wei 整合異質材料與製程之微轉子引擎研製 Integration of heterogeneous materials and processes for a micro-rotor engine 微機電製程;熱阻計算;異質材料微

217.  仿生微型蜂鳥機構之靜態平衡

張育晨; Jhang, Yu-Chen ,  2014
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 劉昭華; Liu, Chao-Hwa 張育晨 Jhang, Yu-Chen 仿生微型蜂鳥機構之靜態平衡 Static balancing of a hummingbird-like micro-aviation-vehicle 微型飛行器;靜態平衡;史蒂芬森三型

218.  仿生蜂鳥飛行機構運動及誤差分析

陳建凱; Chen, Chien-Kai ,  2014
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 劉昭華 陳建凱 Chen, Chien-Kai 仿生蜂鳥飛行機構運動及誤差分析 Kinematic and error analysis of a hummingbird-like micro-aerial-vehicle 機構位置分析;史蒂芬生第三型六連桿機構

219.  模擬裂隙損傷區對母岩受熱應力與外力作用之耦合效應研究(I)

楊長義; 翁孟嘉 ,  2013-01
[Graduate Institute & Department of Civil Engineering] Research Paper
損傷區; 微裂隙; 損傷力學模式; 熱應力; Geological repository; EDZ; micro-crack; damage model; thermal stress 2013-01 zh_TW 行政院國家科學委員會 http://tkuir.lib.tku.edu.tw

220.  淡江蜂鳥—生態觀察尖兵

楊龍杰; 林清彬; 王銀添; 劉昭華 ,  2012-08
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 楊龍杰 林清彬 王銀添 劉昭華 淡江蜂鳥—生態觀察尖兵 Tamkang Hummingbird- an Ecology Observation Platform 拍翼式微飛行器; 生態觀察; 金探子; 淡江蜂鳥; 懸停; flapping MAV (micro-air

221.  微藻MBR污水處理系統開發暨副產品生質能源性質之評析

高思懷 ,  2012-11
[Graduate Institute & Department of Water Resources and Environmental Engineering] Research Paper
淡江大學水資源及環境工程學系 高思懷 微藻MBR污水處理系統開發暨副產品生質能源性質之評析 The Micro-algae MBR Sewage Treatment System Development and the Bio-energy Characteristics Evalution

222.  無人飛行載具分布式多單晶片微控制器飛行控制系統設計

蕭照焜; 馬德明 ,  2012-08
[Graduate Institute & Department of Aerospace Engineering] Research Paper
片微控制器; 網路控制系統; 時間延遲; 無人飛行載具; single-chip micro-controller; network control system; time delay; UAV 本計劃探討以單晶片微控制器為核心，並搭配飛行時所需之感測器與航電儀器，架構無人飛行載具分布式多單晶片微

223.  品牌微電影廣告內容之研究 : 以愛情故事元素為例

黃姁蓁; Huang, Hsu-Chen ,  2015
[Graduate Institute & Department of Mass Communication] Thesis
淡江大學大眾傳播學系碩士班 黃振家; Huang, Jenn-Jia 黃姁蓁 Huang, Hsu-Chen 品牌微電影廣告內容之研究 : 以愛情故事元素為例 A study on micro-film advertising content of brand : the case

224.  多拍翼編隊飛行節能之地面初測

陳建瑋; Chen, Chien-Wei ,  2015
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
;編隊飛行;升推力量測;flapping micro-air-vechicle(MAV);Wind tunnel test;formation flight;lift force and thrust force testing 根據Lissaman 與 Shollenberger於1970年的

225.  磨料噴射技術應用於硬脆材料微孔陣列加工之研究

趙曾民; Chao, Tseng-Min ,  2016
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系碩士班 趙崇禮; Chao, Choung-Lii 趙曾民 Chao, Tseng-Min 磨料噴射技術應用於硬脆材料微孔陣列加工之研究 Abrasive jet machining of micro-hole array on brittle materials 磨料

226.  利用公克級機載航電元件之半自主拍翼飛控

林侑廷; Lin, Yow-Ting ,  2016
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
airborne avionics 拍翼式微飛行器;半自主飛行控制;Arduino 嵌入式系統;Flapping wing micro-air-vehicle (FWMAV);Semi-autonomous Flight Control;Arduino Embedded System 本研究使用可搭載在全機

227.  單身女性的性別再現與消費迷思 : 對臺灣網路影音廣告之研究

游馨; You, Xing ,  2017
[Graduate Institute & Department of Mass Communication] Thesis
: a study of micro-film advertising in Taiwan 單身女性;微電影廣告;後女性主義;文化消費;暖男;廣告收編;single women;Micro-film;Post Feminism;cultural consumption;Considerate Guy

228.  反射式金屬薄殼微米柱之多角度奈米光子噴流研究

楊悠池; Yang, Yu-Chih ,  2017
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
for the core-shell micro-pillar in reflection mode core-shell micro-structure;diffraction limit;photonic nanojet;reflection mode;反射式;光子奈米噴流;核殼微米結構;繞射極限 本論文主要研究核

229.  以「社會價值創造」為考量之短距運輸服務系統效益評估研究：以公共自行車系統為例

許超澤; 簡安耘 ,  2020-12-03
[Graduate Institute & Department of Transportation Management] Proceeding
許超澤 簡安耘 以「社會價值創造」為考量之短距運輸服務系統效益評估研究：以公共自行車系統為例 A Social Value Oriented Evaluation Model for Assessing the Benefit of Micro-mobility Transportation

230.  微型交錯式逆向流熱交換器之研究

曾新超; Tseng, Shin-chau ,  2008
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系博士班 康尚文; Kang, Shung-wen 曾新超 Tseng, Shin-chau 微型交錯式逆向流熱交換器之研究 Investigation of micro staggered counter-flow heat exchanger 微型熱交換器;交錯流熱交

231.  微機電順從機構的拓樸最佳化及設計

林志豐; Lin, Chih-feng ,  2006
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系博士班 史建中; Shih, Chien-jong 林志豐 Lin, Chih-feng 微機電順從機構的拓樸最佳化及設計 Topological optimization in compliant mechanisms for micro-electro

232.  預估修正法於金屬板金成形最佳化料片設計之研究

吳銘宗; Wu, Ming-tsung ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
of sheet metal forming 流線法;真實應變法;適應性網路模糊推論系統;微成形;金屬成形;最佳化料片;尺寸效應.;Nelder-Mead Method;Stream Line Method;True Strain Method;ANFIS;Micro Forming;Metal Forming

233.  具薄層微燒結毛細結構蒸發器二相流裝置之研究

康尚文 ,  2010
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 康尚文 具薄層微燒結毛細結構蒸發器二相流裝置之研究 Experimental Investigation of Evaporator with Thin Micro Sintered Wicks in Two-Phase Flow Devices 薄層微燒結毛細結構

234.  金屬箔片方杯微深引伸成形極限與破裂之研究

蔡坤男; Tsay, Kun-Nan ,  2012
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
淡江大學機械與機電工程學系博士班 葉豐輝; Yeh, Fung-Huei 蔡坤男 Tsay, Kun-Nan 金屬箔片方杯微深引伸成形極限與破裂之研究 Study of forming limit and fracture in micro deep drawing of square cup

235.  ANSYS應用於微型壓力感測器之性能評估

鄭金郎; 楊龍杰; 康尚文; 曾信傑; 郭柏甫; 黃志豪 ,  2000-11
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
2000年第六屆台灣地區ANSYS論文集=2000 ANSYS Taiwan User's Conference，頁311-318
淡江大學機械與機電工程學系 鄭金郎 楊龍杰 康尚文 曾信傑 郭柏甫 黃志豪 ANSYS應用於微型壓力感測器之性能評估 The Application for Estimated of Micro Pressure Sensor in ANSYS 微壓力感測器;有限元素分析;壓電阻性;整體微加工

236.  Semi-SOI Pressure Sensors as Lab-on-Chip Systems Applied to Micro Fluid Dynamics

楊龍杰; 康尚文; 楊賢政; 陳明正 ,  2000-05
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Proceeding
第一屆海峽兩岸微系統科技研討會論文集，頁210-213
to Micro Fluid Dynamics 半導體矽積絕緣層;壓力感測器;實驗晶片系統;鉑薄膜電阻器;微感測器;微流體力學;熱雜訊;Semi-Soi;Pressure Sensor;Lab-On-Chip;Platinum Thin Film Resistor;Microsensor;Micro

237.  仿蜂鳥懸停機構套件之設計與製造

洪堃銓; Hung, Kun-Chuan ,  2014
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Thesis
kits 拍翼微飛行器;四連桿;伊氏直線機構;塑膠射出成型;大行程拍翼角度;flapping micro-air-vehicle (MAV);four-bar-linkage (FBL);Evan's straight line mechanism;plastics injection

238.  A Simplified Modeling for Seismic Responses of Rectangular Foundation on Piles subjected to Horizontal Earthquakes

Chang, Der-Wen; Lee, Min-Ru; Hong, Ming-Yang; Wang, Yen-Chih ,  2016-12-01
[Graduate Institute & Department of Civil Engineering] Journal Article
Journal of GeoEngineering 11(3), pp.109-122
Chang, Der-Wen Lee, Min-Ru Hong, Ming-Yang Wang, Yen-Chih A Simplified Modeling for Seismic Responses of Rectangular Foundation on Piles subjected

239.  《莊子》「典範人格」義蘊的詮釋與重構

江毓奇; Chiang, Yuh-chyi ,  2009
[Graduate Institute & Department of Chinese] Thesis
”;paradigm personality;micro-perspective;macro-perspective;dynamically contextual meaning;“the gathering authors”;“shelter from one dimensional

240.  Nationalism and Democratization: The Case of Taiwan

施正鋒; Shih, Cheng-feng ,  2003-04-06
[Graduate Institute & Department of Public Administration] Journal Article
Gandhi Marg: Quarterly Journal of the Gandhi Peace Foundation 25(1), pp.55-65
淡江大學公共行政學系 施正鋒 Shih, Cheng-feng Nationalism and Democratization: The Case of Taiwan Gandhi Peace Foundation 2003-04-06 en Gandhi Marg: Quarterly