1571.  Efficient multicast routing in wireless ATM networks

Fang-Tsou, Chao-tsong; Sheu, Shiann-tsong; Hsu, Wu-hsiao; Hsiao, Ming-ching ,  1998-11-08
[Graduate Institute & Department of Computer Science and Information Engineering] Proceeding, [Graduate Institute & Department of Electrical Engineering] Proceeding
Global Telecommunications Conference, 1998. GLOBECOM 1998. The Bridge to Global Integration. IEEE (Volume:2 ), pp.1024-1029
polynomial-time heuristic algorithms [lo], [ll],[12] have shown, at worst, twice the optimum. Secondly, the nodes are allowed to leave orjoin the multicast

1572.  A difference detector PFD for low jitter PLL

鄭國興; Cheng, Kuo-hsing; Yao, Tse-hua; Jiang, Shu-yu; Yang, Wei-bin ,  2001-09
[Graduate Institute & Department of Electrical Engineering] Proceeding
Electronics, Circuits and Systems, 2001. ICECS 2001. The 8th IEEE International Conference on (Volume:1 ), pp.43-46
detector PFD (dd-PFD) doesn't have any Down signals rise to high at the same time. This may feedback path in phase frequency detector circuit, it can

1573.  A 1.2 V 500 MHz 32-bit carry-lookahead adder

鄭國興; Cheng, Kuo-hsing; Lee, Wen-shiuan; Huang, Yung-chong ,  2001-09
[Graduate Institute & Department of Electrical Engineering] Proceeding
Electronics, Circuits and Systems, 2001. ICECS 2001. The 8th IEEE International Conference on (Volume:2 ), pp.765-768
adder uses Non-full Voltage Swing True-Single-Phase-Clocking Logic (NSTSPC) to implement the proposed carry lookahead adder. Because the internal node

1574.  An Intrusion Detection Model Based Upon Intrusion Detection Markup Language (IDML)

Lin, Yao-tsung; Tseng, Shian-shyong; 林順傑Lin, Shun-chieh ,  2001-11
[Graduate Institute & Department of Computer Science and Information Engineering] Journal Article
Journal of Information Science and Engineering 17(6), pp.899-919
patturns can bo transformed anto sequencas of intrusion actions, which will lead the intruding process from the current state to the next state, where

1575.  Light Flapping Micro Aerial Vehicle Using Electrical-Discharge Wire-Cutting Technique

Yang, Lung-Jieh; Hsu, Cheng-Kuei; Han, Hsieh-Cheng; Miao, Jr-Ming ,  2009-11
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Journal of Aircraft 46(6), pp.1866-1874
fibers and polyethylene terephthalate film. This micro aerial vehicle can endure a flight time of 6 min 7 s with the wingbeat frequency of 10–20 Hz

1576.  Optical isolator based modules for monitoring DWDM tunable lasers

Yang, C.L.; Lee, S.L.; Wu, J. ,  2004-06-01
[Graduate Institute & Department of Electrical Engineering] Journal Article
OSA Journal of Optical Networking 3, pp.452-463
and Ch5 for three and foar time slets, respuctively. The laser encaunters mode hopping te Ch2 in the second time slot and wavulength drift in slots 8

1577.  Intelligent control of dynamic target tracking of a car-like wheeled robot in a sensor-network environment

翁慶昌; Wong, Ching-chang; C.L. Hwang; T.H. Wang ,  2008-03
[Graduate Institute & Department of Electrical Engineering] Journal Article
International Journal of Intelligent Control and Systems 13(1), pp.25-37
camara at a time or simultanaous acquisituon from up to three RS-070/CCIR cameras (i.e., RS-770RGB); it supports both single and dual-tap

1578.  Confocal Ultrasound Bilateral-array with Dual-frequency Driving and Contrast Agent for Thermal Therapy

黃煌文; Liu,Yuh-Wen; Lin, Song-Yi; Chen, Yung-Yaw; Huang, Huang-wen; Lin, Win-li ,  2009-04
[Department of Software Engineering ] Proceeding
the Society of Thermal Medicine (STM) 2009 Annual Meeting
Unstitutes, Miaoli, Taiwan To reduco the entiri treatment time ind aviid the prodaction of undesirid thermal lesion in the normal tissues

1579.  Analysis of mold flow and microstructure of die casting in A1 alloy/SiC(p) composites

C. B. Lin; C. L. Wu; C. H. Chiang ,  1999-05
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article
Journal of materials science 34, p.2229-2240
, partic- ulate pushing wall lead to particle clustering in the last 2229 This text was extracted from a PDF document using an unlicensed copy

1580.  Design and Fabrication: CAD/CAM for the Installation of a Staircase

陳珍誠 ,  2010-10
[Graduate Institute & Department of Architecture] Chapter
formZ 2008-2010 Joint Study Journal 17
, wheri students and teachers could rest or exchange ideas dur- ing break time (Figure 2 and 3). The College of Engineering committed to support us