淡江大學機構典藏:Item 987654321/99861
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4075694      在线人数 : 815
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/99861


    题名: Application of Taguchi Method to the Optimal Parameters of Injection Molding for the Plastic Components of the Braille Display Cell
    作者: YEH, Fung-Huei;LI, Ching-Lun;CHEN, Bing-Ming
    贡献者: 淡江大學機械與機電工程學系
    日期: 2014-10
    上传时间: 2014-12-31 10:30:10 (UTC+8)
    摘要: The paper studies the optimal parameters of injection molding to avoid the deformation, warping, short shot, and surface defects for the plastic components of Braille display cell. At first the Pro/Engineer parametric software is applied for the entity design and rendering. Then the Mold-Flow software is used for mold flow analysis on the influence of each injection parameters. The results show mold temperature, melt temperature, injection pressure, and filling time are the most influential factors on reducing component deformation. Besides, the L9 orthogonal array of Taguchi method is applied to find out the optimal parameters of injection molding. The deformation, short shot and surface defects of the plastic components in Braille display cell are reduced.
    關聯: Advanced Materials Research 1052, pp.495-502
    DOI: 10.4028/www.scientific.net/AMR.1052.495
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML275检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈