English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3737793      線上人數 : 475
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/99861


    題名: Application of Taguchi Method to the Optimal Parameters of Injection Molding for the Plastic Components of the Braille Display Cell
    作者: YEH, Fung-Huei;LI, Ching-Lun;CHEN, Bing-Ming
    貢獻者: 淡江大學機械與機電工程學系
    日期: 2014-10
    上傳時間: 2014-12-31 10:30:10 (UTC+8)
    摘要: The paper studies the optimal parameters of injection molding to avoid the deformation, warping, short shot, and surface defects for the plastic components of Braille display cell. At first the Pro/Engineer parametric software is applied for the entity design and rendering. Then the Mold-Flow software is used for mold flow analysis on the influence of each injection parameters. The results show mold temperature, melt temperature, injection pressure, and filling time are the most influential factors on reducing component deformation. Besides, the L9 orthogonal array of Taguchi method is applied to find out the optimal parameters of injection molding. The deformation, short shot and surface defects of the plastic components in Braille display cell are reduced.
    關聯: Advanced Materials Research 1052, pp.495-502
    DOI: 10.4028/www.scientific.net/AMR.1052.495
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML273檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋