Model Development for Estimating Microfiltration Performance of Bio-Ethanol Fermentation Broth

doi:10.1016/j.jtice.2014.01.001

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/98570

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/98570

题名:	Model Development for Estimating Microfiltration Performance of Bio-Ethanol Fermentation Broth
作者:	Hwang, Kuo-Jen;Ku, C.Y.
贡献者:	淡江大學化學工程與材料工程學系
关键词:	Membrane filtration;Bio-ethanol;Membrane fouling;Microfiltration;Cake properties
日期:	2014-07-01
上传时间:	2014-08-14 10:23:49 (UTC+8)
出版者:	Amsterdam: Elsevier BV
摘要:	A membrane process is used for bio-ethanol purification from fermentation broths. Yeast cells are separated from a suspension containing yeast, glucose and ethanol using cross-flow microfiltration. Yeast cells are retained by the filter membrane with a mean pore size of 0.45 μm and recycled back into the broth, while most of the glucose and ethanol penetrate through the membrane into the filtrate. The operating condition effects, such as cross-flow velocity and transmembrane pressure, on the filtration flux, cake properties and solute rejections are measured and analyzed. The filtration flux increases over 2-fold as the cross-flow velocity increases from 0.1 to 0.5 m/s and increases 50% as the transmembrane pressure is increased from 20 to 100 kPa at a fixed cross-flow velocity of 0.5 m/s. The experimental data show that the filter cake plays the major role in determining the filtration resistance. The yeast cake exhibits a specific filtration resistance as high as 1014 m/kg and a compressibility of 0.55. The glucose and ethanol rejections are both lower than 8% and increase slightly with increasing cross-flow velocity or transmembrane pressure. The cake formation and solute rejections are analyzed theoretically using a force balance model for particle deposition and the standard capture equation for depth filtration. Semi-empirical equations are derived and used for predicting the filtration flux, cake thickness and solute rejection directly from the operating conditions. The calculated results using the proposed models agree fairly well with the experimental data.
關聯:	Journal of the Taiwan Institute of Chemical Engineers 45(4), pp.1233-1240
DOI:	10.1016/j.jtice.2014.01.001
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	218	检视/开启
index.html		0Kb	HTML	264	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....