Design and Analysis of Bicycle Helmet with Impact Foam Liner

doi:10.4028/www.scientific.net/AMR.706-708.1778

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/98529

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/98529

题名:	Design and Analysis of Bicycle Helmet with Impact Foam Liner
作者:	Teng, Tso Liang;Liang, Cho Chung;Shih, Chien Jong;Van Hai Nguyen
贡献者:	淡江大學機械與機電工程學系暨研究所;大葉大學機械系
关键词:	Bicycle Helmet;EN1078 Standard;Impact Test;Impaxx Foams;Liner;LS-DYNA
日期:	2013-06-01
上传时间:	2014-08-11 17:15:00 (UTC+8)
出版者:	Scientific.Net
摘要:	Currently, expended polystyrene (EPS) are widely used as liner material in bicycle helmet. Due to its characteristics is excellent performance, lightweight, low cost of manufacturing. However, EPS has some disadvantage as difficulty to optimize energy absorbing in different areas of head and inferior effect of heat dissipation and a brittle characteristic. This study focuses on to find a replacement material for EPS foam to improve liner of bicycle helmet. Impaxx energy absorbing (EA) foams present strong potential in overcoming such problems of EPS foam. To make certain that all bicycle helmets reach efficiency, the helmets are required to pass shock absorption test of EN1078 standard. This study performs finite element analyses of helmet impact tests using LS-DYNA software. Simulation results indicate Impaxx foams are suitable for shock absorption test according to the EN1078 standard. Therefore these results encouraged the authors to extend the manufacturing work to cover the creating helmet design and performance experimental tests.
關聯:	Advanced Materials Research 706-708, pp.1778-1781
DOI:	10.4028/www.scientific.net/AMR.706-708.1778
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	30	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....