An Analysis of Forming Limit in Micro Deep Drawing of the Square Cup for Anisotropic Foil

doi:10.4028/www.scientific.net/AMM.105-107.344

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/97612

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/97612

題名:	An Analysis of Forming Limit in Micro Deep Drawing of the Square Cup for Anisotropic Foil
作者:	Yeh, Fung Huei;Li, Ching Lun;Tsay, Kun Nan
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	Anisotropic Foil;Explicit Dynamic Finite Element Method;Forming Limit;Formin;Limit Diagram (FLD);Limit Drawing Ratio;Micro Deep Drawing;Square Cup
日期:	2011-09
上傳時間:	2014-03-28 09:58:35 (UTC+8)
出版者:	Stafa-Zurich: Trans Tech Publications Ltd.
摘要:	This paper presents an explicit dynamic finite element method (FEM) in conjunction with the forming limit diagram (FLD) to analyze the forming limit for the SPCC foil in micro deep drawing of square cup. In the present study, the tensile, anisotropic and friction test are performed to obtain the material parameters of the alloy foil according to the ASTM standards. Importing these properties, the numerical analysis is conducted by the explicit dynamic FEM. The FLD in numerical simulation is used as the criterion of the forming limit in micro deep drawing of the square cup. The forming limit, punch load-stroke relationship, deformed shape and thickness distribution of square cup, are discussed and compared with the experimental results. It shows that a good agreement is achieved from comparison between simulated and experimental results. The limit drawing ratio in micro deep drawing of square cup is 2.08 in this paper. From this investigation, the results of this paper can be used as reference in the relative researches and applications of micro forming.
關聯:	Applied Mechanics and Materials 105-107, p.344-347
DOI:	10.4028/www.scientific.net/AMM.105-107.344
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	236	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....