淡江大學機構典藏:Item 987654321/97485
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62797/95867 (66%)
造访人次 : 3751003      在线人数 : 462
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/97485


    题名: 單柱式線性及點支承曲線連續箱型梁之應力分析
    其它题名: The Stress Analysis of Curved Continuous Box Girder with Single Column Linear and Point Bearing
    作者: 苟昌煥;高金盛;葉建良
    贡献者: 淡江大學土木工程學系
    关键词: 點支承;線性支承;薄壁箱型梁;Point bearing;Linear bearing;Thin-walled box girder
    日期: 2001-12
    上传时间: 2014-03-21 23:34:23 (UTC+8)
    摘要: 本研究基於薄壁梁理論、彈性基礎梁理論及虛功原理,主要探討具線性抗扭支承(Linear bearing)及單柱式點支承(Single column point bearing)之曲線連續梁橋在受力下之斷面應力行為利用中間支承處之位移協調條件建立變形方程式,從線性支承的觀念透過支承扭矩之反向加載來推導出點支承之解析方法,同時並考慮薄壁梁之翹曲及畸變效應,在實例之分析比較過程中,探討曲率半徑效應、橫隔梁間距、跨長大小、斷面深度等因素對線性及點支承橋梁應力特性的影響。
    The stress behavior in the section of curved continuous box girder with linear bearing and single column point bearing is to be analyzed by the thin-walled girder theory, elastic beam theory and the principle of virtual work. The deformation equations are established by the consistent conditions. The warping and distorsion effects will also be considered in this analysis. Through the use of this method of analysis to a practical case, the effects of radius of gyration, the spacing between diaphragms, length of span, the position of support and the width of deck upon the stress characteristics will be discussed and compared.
    關聯: 中國民國力學學會90年度年會暨第25屆全國力學會議=Proceedings of 25 National Conference of Theoretical and Applied Mechanics,12頁
    显示于类别:[土木工程學系暨研究所] 會議論文

    文件中的档案:

    没有与此文件相关的档案.

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈