淡江大學機構典藏:Item 987654321/97202
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4021417      在线人数 : 1045
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/97202


    题名: Significance of grain and grain boundary characteristics of ultrananocrystalline diamond films and tribological properties
    作者: Sankaran, K. J.;Kumar, N.;Dash, S.;Chen, H. C.;Tyagi, A. K.;Tai, N. H.;Lin, I. N.
    贡献者: 淡江大學物理學系
    关键词: Ultrananocrystalline diamond films;Microstructure;Grain boundary;Tribological properties
    日期: 2013-10
    上传时间: 2014-03-18 10:02:40 (UTC+8)
    出版者: Lausanne: Elsevier S.A.
    摘要: Tribological properties of plasma chemistry dependent ultrananocrystalline diamond (UNCD) films deposited by microwave plasma enhanced chemical vapor deposition system are studied using 100Cr6 steel ball as a sliding counter element. UNCD films synthesized with 1.5% H2 in Ar/CH4 plasma consist of large number of clustered diamond grains with small volume fraction of grain boundaries. Decrease in grain boundary volume fraction resulted in simultaneous decline in trans-polyacetylene (t-PA) chain and sp2 bonded amorphous carbon (a-C) phase fraction. However, UNCD films grown in Ar/CH4 plasma shows formation of UNCD grains with high volume fraction of grain boundaries, large amount of sp2 bonding, a-C and network of t-PA chains. The t-PA passivates the dangling bonds and sp2/a-C phase that externally reduces sliding shear resistance, thereby, resulting in ultra-low friction behavior of UNCD films deposited from Ar/CH4 plasma medium. Load dependent frictional behavior of these films was investigated in present study. These films tested under both low and high normal loadings showed high friction coefficient. Capillary dominated surface interaction and plastic deformation based models were found to be appropriate for describing friction behavior under low and high loads, respectively. However, at specific and intermediate normal loads, both low and ultra-low friction coefficients could be explained through elastic contact model that is accounted by the presence of lubricious phase of sp2 and a-C. In addition, low friction coefficient is also governed by surface passivation mechanism. This mechanism is explained when friction test is carried out in controlled atmospheric condition. Investigating the tribological behavior of these films against steel ball is useful for implementing reliable micro-sliding based device applications.
    關聯: Surface and Coatings Technology 232, pp.75-87
    DOI: 10.1016/j.surfcoat.2013.04.055
    显示于类别:[物理學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML247检视/开启
    index.html0KbHTML286检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈