Study on Precision Polishing of a Long Fine Cylinder

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 會議論文 > Item 987654321/96502

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96502

题名:	Study on Precision Polishing of a Long Fine Cylinder
作者:	Chao, Choung-Lii;Chou, Wen-Chen;Kuo, Chia-Wei;Lai, Alan W.;Lin, Hung-Yi
贡献者:	淡江大學機械與機電工程學系
关键词:	Polishing;Cylindrical specimen;Float polishing
日期:	2009-02
上传时间:	2014-03-07 11:52:58 (UTC+8)
摘要:	This research aimed to design and develop a polishing system for precision polishing cylindrical specimen to nanometer surface finish. An experimental polishing system was built in the present study to polish nickel plated specimens with various polishing compounds. The polished specimens were subsequently examined by Alfa-step, OM and SEM for surface finish, morphology and microscopic analysis respectively. The obtained surface condition and material removal rate were correlated to the polishing parameters such as rotation speed, abrasive concentration, and abrasive grit size for the improvement of the polishing effect. Cylinders of 5mm in diameter, 50mm in length were successfully polished to a surface roughness better than 2nm Ra in several hours without damaging the roundness and cylindricalness using abrasive of 0.3μm, 10,000rpm polishing speed and 0.5mm gap distance between polisher and the specimen. A semi-empirical model of polishing was also developed in the study for predicting the materials removal rate.
關聯:	Proceedings of Agenda Plenary Lectures Keynote & Oral Presentations Poster Presentations 2009，4頁
显示于类别:	[機械與機電工程學系暨研究所] 會議論文

文件中的档案:

档案	大小	格式	浏览次数
Study on Precision Polishing of a Long Fine Cylinder_英文摘要.docx	14Kb	Microsoft Word	108	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....