淡江大學機構典藏:Item 987654321/96492
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64178/96951 (66%)
造訪人次 : 9411292      線上人數 : 9204
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96492


    題名: 金屬薄板微成形加工製程之成形性研究與應用---子計畫三:金屬薄板微引伸成形性之研究與應用
    其他題名: A Study and Application on Micro-Forming of Deep-Drawing Process of Metallic Thin Sheet
    作者: 李經綸;葉豐輝;林千森;張瑞永;李建輝;陳嘉彬;黃佑民
    貢獻者: 淡江大學機械與機電工程系
    關鍵詞: 動顯函有限元素;微引伸;成形性;尺寸效應;Dynamic-explicit finite element;Micro deep-drawing;Formability;Size effect
    日期: 2007-11
    上傳時間: 2014-03-07 11:50:48 (UTC+8)
    摘要: 本計畫以三維動顯函有限元素程式分析金屬薄板微引伸成形，並以微拉伸試驗機擷取銅箔材料參數，帶入程式中進行圓杯微引伸與方杯微引伸之成形性分析，完成不同模具尺寸微引伸成形之沖頭負荷、主應力分佈、主應變分佈、杯高分佈及厚度分佈之模擬。在尺寸效應方面，本計畫將料片厚度及晶粒大小導入材料應力-應變構成式，並利用適當之猜測值，以期使用單一方程式就能準確預測不同料片厚度及晶粒大小之應力-應變曲線，結果顯示，與單純應力-應變構成式相比，導入尺寸效應因子的應力-應變構成式差距皆在5%以內。
    The 3-D dynamic finite element program was used to analyze the micro deep-drawing of metallic thin sheet. The material properties of cooper foil were obtained from the micro tensile test machine. The material properties substituted into the program to analyze the formability of the cylindrical-cup and square-cup micro deep-drawing. Simulations of punch loads, principal stress distributions, principal strain distributions, cup height distributions, and the thickness distributions in the micro deep-drawing process on different tool size were achieved through the use of the explicit dynamic finite element program. In the discussion of size effect, this project combined the thickness and grain size into the stress-strain relation. A set of proper values was imported to predict the stress-strain curve by only one equation. The result showed that the difference between the original stress-strain relation and stress-strain relation combined with the thickness and grain size was within 5%.
    關聯: 機械固力學門成果發表會論文集，13頁
    顯示於類別:[機械與機電工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    金屬薄板微成形加工製程之成形性研究與應用---子計畫三_金屬薄板微引伸成形性之研究與應用 A Study and Application on Micro-Forming of Deep-Drawing Process of Metallic Thin Sheet_中文摘要.docx摘要14KbMicrosoft Word328檢視/開啟
    金屬薄板微成形加工製程之成形性研究與應用---子計畫三_金屬薄板微引伸成形性之研究與應用 A Study and Application on Micro-Forming of Deep-Drawing Process of Metallic Thin Sheet_英文摘要.docx摘要14KbMicrosoft Word277檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋