淡江大學機構典藏:Item 987654321/96462
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4020415      在线人数 : 1000
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96462


    题名: 光學玻璃與模仁材料界面化學反應之探討
    其它题名: Investigation of Interfacial Reaction between Various Optical Glasses and Mold Materials
    作者: 吳宗憲;霍正邦;周文成;趙崇禮;馬廣仁
    贡献者: 淡江大學機械與機電工程學系
    关键词: 光學玻璃;模仁材料;界面反應;擴散;沾黏;網狀修飾劑;Pt/Ir薄膜;Optical glass;Mold material;Interaction;Diffusion;Sticking;Network modifier;Pt/Ir film
    日期: 2007-11
    上传时间: 2014-03-07 11:43:56 (UTC+8)
    摘要: 利用熱壓模造非球面玻璃鏡片具有高產值、降低成本與容易製作小尺寸鏡片等優點，但是其也具有相當嚴重的問題在於模仁與玻璃沾粘等待解決，傳統的玻璃模造其玻璃表面的化學反應、應力作用以及反覆的熱處理為三個主要影響模仁壽命的因素。包括玻璃沾黏於模仁表面、模仁的氧化與磨耗，這些都大大縮減了模仁的使用的壽命。本研究係利用不同光學玻璃與多種模仁材料和Pt/Ir鍍膜，在高溫濕潤的狀況來比較及探討兩者之界面化學反應。通入保護氣氛下可改善玻璃與模仁沾黏之狀況。而每種光學玻璃與模仁材料之界面反應與沾黏程度皆不盡相同，本研究比較發現網狀修飾劑含量較多的光學玻璃在高溫的狀態下，較容易與模仁材料之元素相互擴散進而產生激烈之界面化學反應，使玻璃與模仁產生沾黏。而當光學玻璃內網狀修飾劑之特定元素與模仁材料具有較大之化學吸引力時，其界面擴散狀況程度也會較為劇烈。模仁鍍上Pt/Ir膜層可有效抑制光學玻璃之界面擴散以及沾黏現象，但在研究中發現當光學玻璃中具有易於其反應之BaO等網狀修飾劑也會使抗沾粘膜的效果較為下降。鍍膜層數與厚度增加時，也可以有效抑制光學玻璃與模仁材料兩邊由於受熱而游離的原子與離子相互擴散，進而使光學玻璃的沾黏情況減少。
    Glass molding process is considered to have great potential of mass producing various spherical/aspherical glass lenses to a higher achievable accuracy and at a lower cost. However, glass molding has its own problems to deal with such as glass stuck on the mold surfaces and chemical interaction between glass and mold materials. During the molding process mold surfaces have to experience cyclic mechanical and thermal loading. This research aimed to investigate the interaction between various optical glass and mold materials at elevated temperature with/without protective coating and protective gas. The results showed that molding in nitrogen gas could always improve the sticking problem. It is also worth noting that the diffusion between mold and glass proceeds more easily when there are more network modifier in the optical glass. The mold coated with Pt/Ir films can effectively reduce the interaction between the mold and optical glass. In the case of glass containing certain network modifiers, such as BaO, it can degenerate the Pt/Ir films and subsequently suppress the anti-stick effect.
    關聯: 2007 CSME CONF中國機械工程學會第24屆全國學術研討會論文集=Proceedings of the 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers，6頁
    显示于类别:[機械與機電工程學系暨研究所] 會議論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    光學玻璃與模仁材料界面化學反應之探討_中文摘要.docx摘要15KbMicrosoft Word332检视/开启
    光學玻璃與模仁材料界面化學反應之探討_英文摘要.docx摘要14KbMicrosoft Word96检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈