本文目的在於設計一磁力軸承專用之感測器系統,用以量測磁力軸承轉子位移。為兼顧磁力軸承之低成本及微小化,感測器系統亦須以此方向為目標,因此本文選擇霍爾感測器作為研究對象,感測器系統包含霍爾感測器模組以及感測器用磁鐵。利用有限元素分析軟體進行模組設計,並由分析結果挑選適合本文研究之磁鐵型式,最後並進行感測器系統之整合設計;亦針對感測器系統之訊號回授,設計訊號處理運算。本文並架設一磁力軸承模擬機構,可模擬磁力軸承實際運作情形,利用此機構進行感測器運作實驗。除模擬分析結果,本文亦提供實驗驗證結果。 The main objective of this research is on the design of a position sensing system for magnetic levitated rotor. Linear Hall-effect sensor is selected for the sensing system due to its low-cost and miniature size. The sensor system developed includes several Hall-effect sensor modules and a ring permanent magnet. The sensor module and the dimension of the permanent magnet are designed via a finite-element analysis software. The circuits to process the output signal of Hall-effect sensors are also designed. An experimental system to simulate the operation of magnetic bearing is built for experimental verifications. The test results are provided in the paper to validate the performance of the sensor system.
關聯:
2006第五屆臺灣電力電子研討暨展覽會論文集=Proceedings of 2006 Taiwan Power Electronics Conference & Exhibition,6頁