淡江大學機構典藏:Item 987654321/96390
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62797/95867 (66%)
造访人次 : 3741151      在线人数 : 550
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96390


    题名: 具邊界限制的複合層板受中性面應力後屈曲及 後置屈曲行為
    其它题名: Buckling and Postbuckling Behaviors of Initially Imperfect Laminated Plates with Edge Restrains Under In-Plane Loading
    作者: 黃源雄;葉豐輝
    贡献者: 淡江大學機械與機電工程學系
    关键词: 挫曲;後置挫曲;中性面負載;高階非線性板理論;無剪力表面邊界條件;負載-撓曲反應;橫向剪應變;Buckling;Post Buckling;In-Plane Loading;High-Order Nonlinear Plate Theory;Shear Free Surface Boundary Condition;Load-Deflection Response;Transverse Shear Strain
    日期: 1993-12
    上传时间: 2014-03-07 11:28:59 (UTC+8)
    摘要: 本文研究承受中性面應力的非完全平直複 合層板在大變形情況下的屈曲及後置屈曲行為 。研究中考慮複合層板的各種參數對非線性分 析的影響。探討的參數有如:疊層數、疊層角 度、疊板厚度、長寬比、材料性質、非完全平 直的量、中性面拉力、壓力或剪力的大小、中 性面的邊界條件和垂直平面的彈性支□邊界條 件等。複合層板的理論推導上,非完全平直的 量被考量置於厚板非線性理論的應力-應變關 係式中,而所承受的負荷則被考慮置於中性面 邊界條件上;另所採用的簡單高階剪變形層板 理論因滿足表面無剪力邊界條件,故不需考量 修正係數。在分析過程中,首先使用一般性傅 利葉級數方法得到一組非線性運動方程式,然 後再利用數值方法求解。本文詳細討論各種參 數對承受中性面負荷的非完全平直複合層板之 屈曲及後置屈曲行為的影響,並以圖表詳細說 明。所得結果與文獻比較十分吻合,顯示分析結果合理恰當。
    The buckling and postbuckling behaviors of initially imperfect, in-plane loading, moderately thick, laminated composite plates are investigated in this study. The effects of parameters such as aspect ratio, thickness-to- length ratio, initial imperfection, material properties, in- plane forces, and out-of-plane elastically restrained boundary conditions on buckling and postbuckling behaviors are taken into consideration. By assuming that the inplane rotation tensor is constant throughout the thickness, a simple higher order shear deformation non-linear plate theory is extended. The simple higher-order non-linear plate theory employs parabolic shear strain variation across the thickness, and requires no correction factors because it satisfies shear free surface boundary conditions. Initial imperfection is considered in the strain- displacement relations, and in-plane forces are included in the in-plane conditions. Displacement functions are expressed in the form of generalized double Fourier series. It is found that the buckling and postbuckling behaviors are significantly influenced by above parameters and results are in good agreement with published results.
    關聯: 中國機械工程學會第十屆學術研討會固力組論文集=Proceedings of the Tenth National Conference of the Chinese Society of=Mechanical Engineers,頁287-296
    显示于类别:[機械與機電工程學系暨研究所] 會議論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    具邊界限制的複合層板受中性面應力後屈曲及 後置屈曲行為 _英文摘要.docx摘要14KbMicrosoft Word180检视/开启
    具邊界限制的複合層板受中性面應力後屈曲及 後置屈曲行為_中文摘要.docx摘要14KbMicrosoft Word159检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈