淡江大學機構典藏:Item 987654321/96316
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3728190      線上人數 : 840
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96316


    題名: 自動調整約束限制再設計方法在結構最佳化之應用
    其他題名: Automated Constraints Respecification in Structural Optimization
    作者: 張永康
    貢獻者: 淡江大學航空太空工程學系
    關鍵詞: 最佳化設計;線性規劃法;拘束限制;結構最佳化;Optimal Design;Linear Programming;Constraint;Structural Optimization
    日期: 1995-12
    上傳時間: 2014-03-07 09:06:07 (UTC+8)
    摘要: 在對大型航太結構的最佳化設計時,很可能由於約束限制的矛盾或設計不良等原因造成初始設計的問題無法得到合理可行的解答。因此在本篇論文中,提出二種自動調整的約束限制再設計的方法,來幫助設計者重新設計問題。此二種方法是針對行為和設計參數的約束限制所發展的。本研究是以最少的約束限制的改變為目的,並且採用次序線性規劃法驗證分析。本文將以三個典型例子敘述自動調整約束限制再設計法。
    In the optimum design of large aerospace structures, it is possible that the initial design problem has no feasible solution due to unrealizable or conflicting constraints. In this paper, two automated constraints respecification (ACR) procedures are presented to help the designer to respecify the constraints when this occurs. Automated constraints respecification procedures are developed for both behavior constraints and side constraints. The ACR procedures are formulated as minimum constraints change problems and solved by sequential linear programming. Three examples are used to illustrate the ACR formulations.
    關聯: 第一屆海峽兩岸航空太空學術研討會論文集,頁265-270
    顯示於類別:[航空太空工程學系暨研究所] 會議論文

    文件中的檔案:

    沒有與此文件相關的檔案.

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋