單點鑽石切削加工不鏽鋼之研究

機構典藏 > College of Engineering > Graduate Institute & Department of Electrical Engineering > Proceeding > Item 987654321/96031

Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/96031

Title:	單點鑽石切削加工不鏽鋼之研究
Other Titles:	The Study on Single-Point Diamond Turning of Stainless Steel
Authors:	鄒緯廷;趙崇禮;陳大同;白清源;呂寅棟
Contributors:	淡江大學電機工程學系
Keywords:	鑽石切削;刀具磨耗;不銹鋼;表面品質;機械加工;Dimond turning;Tool wear;Stainless steel;Surface quality;Machining
Date:	2002-11
Issue Date:	2014-02-13 11:36:55 (UTC+8)
Abstract:	本研究探討單點鑽石切削對不鏽鋼加工時不同刀具形狀對材料移除機制，刀具磨耗，及加工後之表面性狀的影響。圓弧刀、圓椎刀及金字塔型刀三種不同刀具，配合以不同的加工參數，來比較加工後的表面品質與刀具的磨耗情形。實驗結果發現在適當的加工參數控制下，使用圓錐刀可以降低刀刃的磨耗得到鏡面的加工表面，節省加工成本與加工的時間。 This study investigates the influence of tool geometries on the material removal mechanisms, tool wear and surface characteristics involved in and after machining stainless steel using single-point diamond turning technique. The surface finish and tool wear were compared after diamond-turning using different machining conditions with diamond tools of three different tool geometries (round-, cone- and pyramid-shaped). The experimental results show that under some adequately chosen machining conditions, it is possible to obtain a mirror-like surface finish with low tool wear as well as low machining cost and time using the cone-shaped diamond tool.
Relation:	第十一屆國防科技學術研討會暨國防工業訓儲預(士)研發成果展：國家科技發展與國防科技自主，頁N.A.(CD)
Appears in Collections:	[Graduate Institute & Department of Electrical Engineering] Proceeding

Files in This Item:

File	Description	Size	Format
單點鑽石切削加工不鏽鋼之研究_中文摘要.docx	摘要	15Kb	Microsoft Word	175	View/Open
單點鑽石切削加工不鏽鋼之研究_英文摘要.docx	摘要	15Kb	Microsoft Word	82	View/Open

Loading...