淡江大學機構典藏:Item 987654321/94980
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 62830/95882 (66%)
Visitors : 4038049      Online Users : 562
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/94980


    Title: 逆洗對沈浸式薄膜過濾性能之影響
    Other Titles: Effect of Backwash on the Performance of Submerged Membrane Filtration
    Authors: 黃國楨;詹智勝
    Contributors: 淡江大學化學工程與材料工程學系
    Keywords: 沉浸式薄膜過濾;微過濾;薄膜阻塞;逆洗;過濾性能;Submerged membrane filtration;Microfiltration;Membrane blocking;Backwash;Filtration performance
    Date: 2007-09
    Issue Date: 2014-02-09 00:51:14 (UTC+8)
    Abstract: 本研究旨在探討逆洗的操作條件對沈浸式薄膜過濾效能的影響。以平均孔徑為5.6μm之薄膜過濾粒徑為5μm之聚甲基丙烯酸甲酯(PMMA)粒子為例,探討逆洗時間、逆洗頻率及逆洗通量等操作條件對濾速恢復與逆洗效率的影響。研究結果顯示:在過濾初期,過濾阻力之主要來源是薄膜的阻塞,等到過濾500秒後,則轉變成濾餅過濾模式,但薄膜孔洞阻塞之阻力仍佔總阻力之50%以上。操作在低逆洗通量時,長時間的逆洗比短時間的逆洗更能去除內部阻塞約達23%。比較第一次逆洗的濾速回升率,則在低逆洗通量下,可將濾速提升約39%,高逆洗通量則可將濾速提升約56%。而高逆洗通量對於附著在薄膜孔道內的粒子具有良好的沖刷效果,並可以有效的去除薄膜表面上的濾餅,故更能讓濾速提升;因此在長時間且高通量的逆洗條件之下,效率值平均可達40%,可以比低通量的逆洗高出2倍的效率值。
    The effects of backwash conditions, such as filtration time, backwash duration, backwash flux, on the filtration rate recovery and membrane blocking in submerged membrane filtration are studied. The experimental results show that the filtration resistances due to cake formation and membrane blocking play the major roles on the overall filtration resistance, but the latter one is always dominant. The filtration rate can be increased by increasing backwash flux and backwash duration because of the reduction of membrane internal fouling. In the first backwash cycle, the filtration rate can be recovered reaching about 39% and 56% of the original under the low and high backwash fluxes, respectively. It can be concluded that to operate under the conditions of long backwash duration and high backwash flux is optimum. In such conditions, the overall filtration efficiency can be increased as high as 40%. A higher backwash flux may make a 2-fold efficiency than a lower one would be under the same backwash duration.
    Relation: 2007年輸送現象及其應用研討會論文集,4頁
    Appears in Collections:[Graduate Institute & Department of Chemical and Materials Engineering] Proceeding

    Files in This Item:

    File Description SizeFormat
    逆洗對沈浸式薄膜過濾性能之影響_中文摘要.docx摘要20KbMicrosoft Word164View/Open
    逆洗對沈浸式薄膜過濾性能之影響_英文摘要.docx摘要18KbMicrosoft Word128View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback