淡江大學機構典藏:Item 987654321/94935
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62822/95882 (66%)
造訪人次 : 4029337      線上人數 : 566
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/94935


    題名: 生物可分解塑膠PHA之多孔性薄膜製備及其生醫應用(II)
    作者: 董崇民;鄭廖平;洪漢祥
    貢獻者: 淡江大學化學工程學系
    關鍵詞: 生物可分解性高分子;多孔型薄膜;聚丁基烷酯;電漿表面改質;Biodegradable polymer;Poly(hydroxybutyrate);Porous membrane;Modification by plasma polymerization
    日期: 2003-12
    上傳時間: 2014-02-09 00:44:07 (UTC+8)
    摘要: 本研究以浸漬相轉換法製備生物可分解性高分子－聚丁基烷酯(Poly(hydroxybutyrate；PHB)之多孔型薄膜，並應用電漿誘導接枝將薄膜表面改質使薄膜表面功能化。PHB薄膜之製備以氯仿為溶劑，乙醇為非溶劑。首先製作ethanol－chloroform－PHB成膜系統之相圖，利用其選定適當製膜液組成，並藉由改變製膜液之配製溫度，製備不同結構之薄膜。薄膜之孔隙結構、結晶性、機械強度、滲水性等皆加以分析探討，以了解這些物性與製膜程序之關係。其次我們以電漿誘導聚合法將聚丙烯酸接枝在PHB薄膜表面上，並藉由改變接枝條件如電漿處理時間、電漿功率、接枝反應時間、單體濃度等獲取最佳接枝條件，結果顯示最大接枝量可達0.48 mg/cm2。
    In this research, porous membranes of a biodegradable polymer, poly(hydroxybutyrate), were synthesized and the surfaces of which were modified by plasma-induced polymerization so as to engender functionality to the membranes. Chloroform and ethanol were used as the solvent and nonsolvents, respectively, for membrane formation by the immersion precipitation method. Phase diagram of the ethanol-chloroform-PHB system was constructed; thereby appropriate dope composition was selected. Membranes with different structures were then prepared by changing the dope preparation temperature. The porous structure, crystalline character, mechanical strength, and water wettibility of the formed membranes were studied to understand the relationship between these properties and the membrane formation process. Plasma-induced polymerization method was employed to graft poly(acrylic acid) on the membrane surface. Various variables, viz., plasma treatment time, plasma power, grating reaction time, and monomer concentration were investigated and the largest grafting yield was found to be 0.48 mg/cm2 under optimal conditions.
    關聯: 2003永續發展科技與政策研討會論文集，15頁
    顯示於類別:[化學工程與材料工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    生物可分解塑膠PHA之多孔性薄膜製備及其生醫應用(II)_中文摘要.docx摘要19KbMicrosoft Word216檢視/開啟
    生物可分解塑膠PHA之多孔性薄膜製備及其生醫應用(II)_英文摘要.docx摘要18KbMicrosoft Word97檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋