淡江大學機構典藏:Item 987654321/94537
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3944838      在线人数 : 609
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/94537


    题名: Design and implementation of power IC for LED lighting
    其它题名: LED照明的電源IC設計和實現
    作者: 黃朝忠;Huang, Chao-Chung
    贡献者: 淡江大學電機工程學系博士班
    李揚漢;Lee, Yang-Han
    关键词: LED照明;LED lighting
    日期: 2013
    上传时间: 2014-01-23 14:44:58 (UTC+8)
    摘要: 在重視環保及節省能源的時代，現在各國開始廣泛使用LED 燈具, 像LED燈泡，LED 燈管和LED路燈都是使用白光LED當作光源，由於各國使用的輸入電壓皆不相同，因此在製作時需要能夠廣泛應用於各種電壓的白光 LED驅動器就極為重要。
    我們介紹研究動機和本論文的結構。首先提出超高壓電壓穩壓器的設計和實現，當使用8V~110V的輸入電壓時，可以產生穩定的6.5V輸出電壓。
    具有線電壓補償的白光LED驅動電路的設計和實現，當輸入電壓為110Vac 或220Vac經過整流後的電源時，LED驅動電路可以直接降壓為7V提供給內部控制電路使用，利用外部的電阻偵測LED的電流，使LED 電流可以穩定在395mA，由於電壓需要可以使用在110Vac或220Vac，設計一個針對輸入電壓變異的補償電路，使LED驅動電路在輸入電壓變異大時也能提供LED流過穩定的電流，減少LED平均電流的變異。
    LED驅動電路使用模糊控制設計，模糊控制不需要複雜的數學計算，可以利用經驗法則設計出控制方法，使用siumlink設計及模擬LED照明控制系統。最後為結論及未來的研究方向。
    In an age where environmental protection and power conservation are prioritized, countries worldwide have begun to employ light-emitting diodes (LEDs) for a wide range of applications. LED bulbs, tubes, and street lights use white LEDs as the light sources. Because input voltage sources used vary in different countries, manufacturing a white LED driver that can be applied to various voltage sources is extremely important.
    The motivation of this thesis study and the organization of this thesis are introduced. The design and the implementation of an ultrahigh voltage (UHV) regulator are first introduced that it can generate a stable 6.5 V output voltage when the input voltage operates in 8~110 V range.
    A white LED controller with line compensation capability is designed and fabricated. This integrated circuit (IC) is designed when the input voltage is operated at 110 V or 220 V. In the IC design of this controller circuit a step-down circuit is implemented to convert a given input voltage down to 7 V. An external resistor is included in this IC to detect and maintain the current flowing through the LED at 395 mA. Because the current flowing through an LED lamp needed to be maintained within a small variation range at either 110 or 220 V input voltage, a line compensation circuit is implemented. Since the input voltage has a wide variation range a compensation circuit is designed and exploited to compensate for any input voltage variation and consequently to reduce the possible variation of the average current across the LED.
    The LED lighting is also processed with fuzzy control. Using fuzzy control in the design of LED controller it is not necessary to implement the conventional complicate mathematical operation instead it uses the empirical knowledge of the control process in the decision criterion. It uses the Simulink program to design and simulate the LED lighting control system.
    Finally a conclusion of the dissertation is made and some interesting tasks are proposed for future study.
    显示于类别:[電機工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML240检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈