淡江大學機構典藏:Item 987654321/94373

淡江大學機構典藏

Menu Search
查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/94373


    题名: 鉑-二氧化鋯碳甲醇氧化電催化劑的製備與性質分析
    其它题名: Preparation and characterization of Pt-ZrO2/C electrocatalysts for methanol oxidation reaction
    作者: 葉祐齊;Yeh, Yu-Chi
    贡献者: 淡江大學化學工程與材料工程學系碩士班
    張正良;Chang, Cheng-Liang
    关键词: 直接甲醇燃料電池;電催化劑;甲醇氧化反應;二氧化鋯;Direct Methanol Fuel Cell;electrocatalyst;methanol oxidation reaction;Zirconia
    日期: 2013
    上传时间: 2014-01-23 14:30:00 (UTC+8)
    摘要: 本篇以研究直接甲醇燃料電池 (Direct Methanol Fuel Cell, 簡稱 DMFC) 陽極電催化劑為目的，對 Pt-ZrO2/C 電催化劑進行製備與性質分析，進而開發出能夠改善或增進甲醇燃料電池之效能的電催化劑。
    在此分成兩個步驟來製備 Pt-ZrO2/C 電催化劑，第一步，以 ZrO(NO3)2．2H2O 為前驅物，Vulcan XC-72 為碳載體，以共沉澱法先行合成出 ZrO2/C 奈米複合材料；第二步，利用多元醇還原法，以乙二醇作為還原劑，將 Pt 奈米顆粒還原在 ZrO2/C 奈米複合材料上。並嘗試以不同重量比的 Zr 與 C、不同的熱處理溫度以及經過酸或鹼修飾過的碳等參數來製備 Pt-ZrO2/C 電催化劑。本研究使用掃描式電子顯微鏡 (Scanning Electron Microscope, SEM)、穿透式電子顯微鏡 (Transmission Electron Microscope, TEM)、X 光繞射分析儀 (X-ray Diffractometer, XRD) 對電催化劑的表面性質進行分析，再以循環伏安法 (Cyclic Votammetry, CV)、計時安培法 (Chronoamperometry, CA) 進行電化學特性分析。
    Pt-ZrO2/C 電催化劑在 300 °C 熱處理溫度下，有著最佳的 MOR 效能表現。而 PZxCy-300 系列電催化劑中，Zr 與 C 重量比為 2 比 78 的這組，Pt 奈米顆粒最小 (2.65 ± 1 nm)，ECSA 為 76 ± 6 m2/g Pt，MOR 效能為 648 ± 35 A/g Pt，也比商業用電催化劑 E-TEK Pt(20 wt%)/C 高。加了酸與鹼修飾過的碳之 PZxCay-300 系列與 PZxCby-300 系列電催化劑，對 MOR 效能雖然沒有明顯的提升，但在整體的表現上是呈現向上的趨勢，且抗 CO 毒化能力與穩定性方面，都有顯著的增強。
    This study were prepared the direct methanol fuel cell (Direct Methanol Fuel Cell, referred DMFC) anode catalysts Pt-ZrO2/C. Preparation and characterization of Pt-ZrO2/C eletrocatalysts for the purpose of improving DMFC performance.
    Here two-step process to prepare Pt-ZrO2/C electrocatalyst. The first step to synthesized ZrO2/C nanocomposite by co-precipitation method use ZrO(NO3)2．2H2O as precursor, Vulcan XC-72 as carbon support. Second, use the polyol reduction method with ethylene glycol as a reducing agent to reduce the Pt nanoparticles dispersed on ZrO2/C nanocomposite. And try to change different weight ratio of Zr and C, different heat treatment temperatures and carbon support modified by acid or base. In this study, using a scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction analyzer (XRD) to analyze the electrical properties on the surface of the electrocatalyst. The electrochemical characterization was examined by cyclic voltammetry (CV) and chronoamperometry (CA) in acidic solutions.
    The Pt-ZrO2/C electrocatalyst has the best MOR performance at 300 ° C. When the PZxCy-300 series of electrocatalyst weight ratio of Zr and C was 2 to 78, it was have the smallest Pt nanoparticles Pt (2.65 ± 1 nm). Meanwhile, both the ECSA (76 ± 6 m2/g Pt) and MOR efficacy (648 ± 35 A / g Pt) were high than commercial electrocatalyst E-TEK Pt(20 wt%)/C. Although the PZxCay-300 and the PZxCby-300 series electrocatalyst used carbon support modified by acid or base didn’t have much more improvements MOR efficacy. But for CO tolerance ability and stability, it were significantly enhance.
    显示于类别:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML258检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章
    DSpace Software Copyright © 2002-2004  MIT &  HP  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈