Characterization study of GaN-based epitaxial layer and light-emitting diode on nature-patterned sapphire substrate

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/89121

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/89121

题名:	Characterization study of GaN-based epitaxial layer and light-emitting diode on nature-patterned sapphire substrate
作者:	Lin, H.Y.;Chen, Y.J.;Chang, C.L.;Li, X.F.;Kuo, C.H.;Hsu, S.C.;Liu, C.Y.
贡献者:	淡江大學化學工程與材料工程學系
关键词:	III–V;Semiconducting
日期:	2012-06-01
上传时间:	2013-05-15 11:44:47 (UTC+8)
出版者:	New York: Cambridge University Press
摘要:	Chemical wet etching on c-plane sapphire wafers by three etching solutions (H3PO4, H2SO4, and H3PO4/H2SO4 mixing solution) was studied. Among these etching agents, the mixing H3PO4/H2SO4 solution has the fastest etching rate (1.5 μm/min). Interestingly, we found that H2SO4 does not etch the c-plane sapphire wafer in thickness; instead, a facet pyramidal pattern is formed on the c-plane sapphire wafer. GaN light-emitting diode (LED) epitaxial structure was grown on the sapphire wafer with the pyramidal pattern and the standard flat sapphire wafer. X-ray diffraction and photoluminescence measurement show that the pyramidal pattern on the sapphire wafer improved crystalline quality but augmented the compressive stress level in the GaN LED epilayer. The horizontal LED chips fabricated on the pyramidal-patterned sapphire wafer have a larger light output than the horizontal LED chips fabricated on the standard flat sapphire wafer by 20%.
關聯:	Journal of Materials Research 27(6), pp.971-977
DOI:	10.1557/jmr.2012.24
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
-JMR-JMR27_06-S0884291412000246a.pdf		356Kb	Adobe PDF	511	检视/开启
index.html		0Kb	HTML	339	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章