淡江大學機構典藏:Item 987654321/89053
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4138681      線上人數 : 364
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/89053


    題名: Contactless molding of arrayed chalcogenide glass lenses
    作者: Ma, Kung Jeng;Chien, Hsi Hsin;Huang, Su Wei;Fu, Wen Yen;Chao, Choung-Lii
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Contactless molding;Arrayed lenses;Chalcogenide glass;Viscoelastic deformation
    日期: 2011-06
    上傳時間: 2013-05-08 13:50:03 (UTC+8)
    出版者: Amsterdam: Elsevier BV * North-Holland
    摘要: The moldable chalcogenide glass material has been developed recently. This study developed a new process to produce an arrayed chalcogenide glass lenses by a contactless molding process, which is considered to have a great potential for the mass production of arrayed glass lenses with low cost, ease of manufacture and free of surface defects. The stainless steel plate with arrayed through holes was employed as the molds. The selenium based chalcogenide glass plate was put on the mold and nitrogen gas was introduced into the closed chamber to allow gas pressure up to 4 kg/cm2. IR heating allows the chalcogenide glass plate to approach the soft point, and forces glass flows into the arrayed through holes to form the arrayed glass lenses by viscoelastic deformation. A higher forming temperature, pressure and longer time duration tend to produce the arrayed lenses with a higher peak height and a smaller radius of curvature. The arrayed chalcogenide glass lenses with a peak height of 430 μm can be obtained at a forming temperature of 305 °C, a gas pressure of 1 kg/cm2 and a time duration of 110 s. The contactless gas assisted molding system can avoid contact induced glass sticking and gas bubble problems. The surface qualities of molded lenses are much better than that of lenses molded by the traditional contact molding process.
    關聯: Journal of Non-Crystalline Solids 357(11–13), pp.2484–2488
    DOI: 10.1016/j.jnoncrysol.2010.11.077
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML18檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋