淡江大學機構典藏:Item 987654321/88157
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62797/95867 (66%)
造访人次 : 3728396      在线人数 : 769
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88157


    题名: 潰壩時殘留壩體與流量關係之研究
    其它题名: Residue dam-discharge relationship at dam-break site
    作者: 邱庭嶢;Qiu, Ting-Yao
    贡献者: 淡江大學水資源及環境工程學系碩士班
    許中杰
    关键词: 潰壩;潰口流量;FLUENT;Dam-Break;Discharge
    日期: 2013
    上传时间: 2013-04-13 12:03:23 (UTC+8)
    摘要: 本研究應用模型試驗及數值模擬分析潰壩時殘留壩體與流量之關係,試驗之潰壩模型置於底床波降S0=0.01、長12.00m及寬0.775m而渠壁深0.55m之直線渠槽下游端。潰口形狀為矩形。壩體設置可分為三層,第一層為潰口形狀,第二層為一較潰口最大寬度寬之左右對稱雙開門板,第三層為一可向上抽離之隔板,由於抽離之隔板與水體隔開,抽離隔板時可減少隔板對水體所造成之向上的剪應力。並設定殘留壩高0.250m、0.175m、0.125m、0.100m、0.000m以及兩側殘留壩體使潰口寬度為1.0、0.9、0.8、0.7倍渠寬,用以模擬非完全潰壩之現象。
    本研究亦應用FLUENT模擬軟體建立非穩態流之模式,並以紊流模式依據三維模型進行潰壩模擬,其模擬條件與實體模型試驗條件相同,並將模擬結果與試驗結果比較分析。
    結果顯示殘留壩體會影響流量的大小與延時,另分析發現可以位能轉換動能之方式計算出潰口流量計算公式。
    This research applies model tests and numerical simulation to analyze, at dam failure, the relationship between flow rate and the residual dam body. The dam failure test model is located downstream of a linear channel with a bed slope S0 of 0.01, length of 12.00 m and width of 0.775 m. The shape of the breach is rectangular. The dam consists of three tiers, first of which is in the shape of the breach; the second tier is a horizontally symmetric double-door panels wider than the maximum width of the breach. A removable divider that can be pulled up makes the third tier. Removal of the divider separates it from the water body, which reduces the upward shear stress imposed by the divider on the water body. Simulation of a partial dam failure is done by setting the residual dam height to 0.250, 0.175, 0.125, 0.100, and 0.000 m tall and by modifying the residual dam body to make the breach width equal to 1.0, 0.9, 0.8 and 0.7 times of the channel width.
    This research also utilizes FLUENT simulation software with a three-dimensional model to generate a dam failure simulation under non-steady flow and turbulent flow modes. The simulation criteria are the same as those of the physical model tests, and the simulation results are compared and analyzed with the physical test results.
    显示于类别:[水資源及環境工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML193检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈