淡江大學機構典藏:Item 987654321/88137
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62861/95882 (66%)
造訪人次 : 4194548      線上人數 : 828
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88137


    題名: 直交表用於π型平面天線之設計
    其他題名: Application of orthogonal array for the design of π-shaped planar antenna
    作者: 孫茂棋;Sun, Mau-Chhi
    貢獻者: 淡江大學電機工程學系碩士班
    李慶烈;Li, Ching-Lieh
    關鍵詞: 直交表;平面天線;雙頻天線;planar antenna;WLAN antenna;Taguchi method;Orthogonal Array;dual-band;PIFA;π-shaped antenna
    日期: 2012
    上傳時間: 2013-04-13 12:02:27 (UTC+8)
    摘要: 本論文探討藉由直交表(Orthogonal Array, OA)的使用以進行天線的創新迭代設計，目標設定在設計一種平面式的雙頻天線，針對一以同軸線直接饋入的π型天線結構進行優化，期待能在有限且少量次數的迭代次數內，使天線結構達到我們所要求之優化設計。
    令上述的π型天線結構駐在一本研究係針對厚度為0.8mm的FR4基板(相對介電係數為4.4、Dielectric Loss Tangent為0.02)，且其頻寬所涵蓋的應用範圍包括ISM/Bluetooth、WiMAX、WLAN(802.11a/b/g/n)，針對此進行模擬分析與如下的優化設計，並和實作結果相驗證，其涵蓋應用範圍包括ISM/Bluetooth、WiMAX、WLAN(802.11a/b/g/n)。
    　 為了完成上述的創新迭代設計過程，首先得依據π型平面天線的結構，選定設計/調配之結構參數以及參數之位準(level)，建立一個適當之直交表；之後再以電磁模擬軟體執行直交表上的部份因子實

    驗，進行少量且有限次數的迭代；依據模擬數據來計算不同因子實驗之適應值，以進行天線參數之優化，目的在測試本論文得設計方法是否能在進行少量且有限次數的迭代之後，滿足預先規畫的頻段規格要求。
    　 本論文所使用的參數設計法與其他參數設計法比較，最大的特色在於利用直交表中每個參數因子的位準出現次數為均等的特性，以達到加快設計流程、降低搜尋次數，再結合逐步縮減搜尋範圍之技巧，以實現天線之優化搜尋，達到將直交表應用於迭代設計天線之理念。
    In this thesis, the application of Orthogonal Array (OA) to design antennas through a novel iterative procedure is investigated. The objective is to design a planar dual-band antenna. A coaxial-fed π-shape antenna structure is optimized through the proposed novel procedure. It is expected that within a certain limited small iterations the S11 characteristics of the antenna can satisfy the required specificaion.
    The antenna concerned is assumed to reside on an FR4 substrate (of thickness of 0.8mm, and with relative dielectric constant of 4.4 and loss tangent~0.02), and with frequency range covering the application of ISM / Bluetooth, and WiMAX, WLAN (802.11a/b/g/n). For the above conditions, the antenna simulation and the iterativelly optimized design are carried out, and finally the novel antennas are fabricated and verified by measurement.
    For the novel iterative design procedure, the parameters of the π-shaped antenna are first chosen, and their ranges are suitably set, then a corresponding OA can be estabilished. Next, the fractional factorial experiments of the OA are carried out by using a commertial electromagnetic simulation software. Based on the simulation results, the fitnesses of the fractional factorial experiments are calculated such that the limited small number of iterations are conducted to optimize the antenna parameters. The objective is to test that whether the proposed novel antenna design procedure work to have the convergent antenna meet the pre-set frequency requirement or not,
    As compared to other design method, the most important feature of the proposed novel method is the utilization of the OA, which exhibits the uniformity for the occurrence of each level of the parameters. The inclusion of OA is expected to accellerate the design process, reduce the search time. When the OA is combined with the range reduction technique, it is found quite suitable to serve as an alternative for antenna design.
    顯示於類別:[電機工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML181檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋