淡江大學機構典藏:Item 987654321/88083
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4031603      在线人数 : 1018
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88083


    题名: 二維自由視角立體影像監視系統
    其它题名: Two-dimensional free view stereo video monitor system
    作者: 張孜禔;Chang, Tzu-Ti
    贡献者: 淡江大學電機工程學系碩士班
    李維聰;Lee, Wei-Tsong
    关键词: 即時;自由視角;匹配;Real-time;Free view point;SURF;Harris;Feature matching
    日期: 2012
    上传时间: 2013-04-13 11:59:59 (UTC+8)
    摘要: 由於近年來日漸成熟的影像技術,未來影像資訊勢必不只是單純呈現立體影像,而是能與使用者互動,由使用者決定觀看影像角度。因此,本論文將建立一個二維自由視角監視系統,利用多個不同角度的攝影機所拍攝出的影像資料,經過運算,提供使用者即時的自由視角監視功能。
    在大多數自由視角系統必須建立一個完整的三維立體模型,建立三維立體模型將會花費龐大運算的時間,因此本計畫捨棄了原始的三維立體建模方式,而提出另一套影像系統,此影像系統是只根據使用者需求,即時計算出使用者所需的角度影像,而不需要建立完整模型後,再提供影像,因此,可節省許多建立模型的時間,達到即時的目的。
    本論文的影像系統,第一步驟,將於環境中多個不同角度架設攝影機,對同一個場景,不同角度擷取影像,擷取影像畫面,步驟二,當得到影像後,會分別對每張影像以Harris-SURF特徵點偵測演算法提取特徵點,步驟三,做特徵點匹配,以此來找出不同角度所拍的影像畫面中相同的地方,步驟四,再將影像以特徵點作為頂點,以三角分割演算法,將影像分割成數個三角形。以上步驟一至步驟四會不斷循環,以更新最新影像資訊,直到當使用者提出的要求時,才會以三角分割後的三角形為單位,配合匹配結果透過影像合成計算出觀看者所要求之角度影像,呈現給觀看者。
    Due to the maturing of imaging technology in recent years, future monitoring has become not only simply display 3D images, but also be able to interact with users. In this paper, we present a Two-dimensional free view point monitor system. The images captured by the multiple cameras in the system. After calculation, the system to provide users with real time free view point.
    Tradition 3D modeling algorithms usually have high accuracy but low performance, speeding up the system is the first problem we face. Instead of reconstructing 3D models, we put our focus on simulating users’ point of view in our new algorithm.
    Our experimental environment requires multiple cameras focus on one object in different angle. After images are captured by cameras, we’ll find feature points on each image with Harris-SURF corner detector. The third step is matching these corner points, finding relations between different images. The fourth step is triangle meshing. By using feature points as vertex, the images are segmented into several triangles. System repeats step one to four until user has new view point commands.
    显示于类别:[電機工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML209检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈