淡江大學機構典藏:Item 987654321/88066
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4040061      線上人數 : 1042
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88066


    題名: 混合式動態平衡減振器之設計及研究
    其他題名: Study of a hybrid dynamic balancer and vibration absorber
    作者: 羅仲延;Lo, Chung-Yen
    貢獻者: 淡江大學航空太空工程學系碩士班
    王怡仁
    關鍵詞: 減振器;振動系統;螺旋彈簧;Vibration Absorber;Vibration System;Helical Spring
    日期: 2013
    上傳時間: 2013-04-13 11:59:12 (UTC+8)
    摘要: 主動式減振可以有效抑制振動的問題,可惜成本較高。被動式減振器雖然受制於其減振效果,但由於製造簡易且成本低廉,因此已廣為被業界採用。針對被動式減振器之有限減振效果,吾人將提出一種新式的自調被動減振器設計,不僅在成本上優於主動式減振,在減振的效果也有相當良好的成果。吾人所設計的減振器系統,並不會隨著被減振對象的不同而更改其設計架構,該減振器會自行在架構上尋找最佳的減振位置來達到平衡減振的效果。本研究將此模型實體化,藉由實驗驗證理論的正確性。本實驗模型係於被減振對象的架構下方設置一滑軌,此滑軌的擺設方向係依先前理論預估之位置設計而得。吾人將於此滑軌下方懸吊一螺旋彈簧,而該螺旋彈簧下方則聯結一橫向桿件,此桿件可藉以驅動螺旋彈簧上下及旋轉,以抑制主體之振動。而隨著主體之振動,此螺旋彈簧減振器將沿著滑軌移動,直至達到系統之最小振動為止,如此將自動調整位置而達到最佳的減振效果。這些設計除了具備理論的基礎,也將極具實用價值,相信對於目前的減振方法有極佳的提升。
    This study proposes an economical and effective method of reducing vibration in a rigid-plate mechanism. The vibrating mechanism comprises a rigid body plate joined by a spring at each of the four corners. Three kinds of slots (longitudinal, cross and diagonal slots), were embedded under the plate. We attached a 2-DOF (rotation and transverse) Tuned-Mass-Damper (TMD) to the slot at the bottom of the rigid plate. This“self-adjust-position”hybrid dynamic balancer TMD is allowed to move along the slot and is capable of balancing and diminishing the vibration of the plate. Lagrange’s equation was used to derive the motion of the rigid plates. Vibration reduction effect was studied analytically and numerically following attachment of the TMD at different fixed positions in the system. We implemented a practical model with different kinds of slot under the plate to measure the amplitude of vibration with the dynamic balancer TMD, and conducted a comparison between the theoretical and empirical results. The experimental results demonstrate that the optimal vibration reduction effect was achieved when the TMD was attached initially at a position far from the applied force point. The results also show that the diagonal slot reveals the most effective in reducing the amplitude of vibrations of the plates, when the force was applied on the end of the diagonal slot. The frequency response graph shows that theoretical estimates correspond to experimental results.
    顯示於類別:[航空太空工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML195檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋