淡江大學機構典藏:Item 987654321/88030
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8459620      在线人数 : 8528
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88030


    题名: 蒸汽腔體均溫性之實驗量測
    其它题名: Temperature uniformity measurement of vapor chamber heat spreader
    作者: 楊敬琨;Yang, Jing-Kun
    贡献者: 淡江大學機械與機電工程學系碩士班
    康尚文;Kang, Shnug-Wen
    关键词: 蒸汽腔體;多孔均溫板;均溫性;Vapor chamber;multi-well heat spreader;Temperature Uniformity
    日期: 2012
    上传时间: 2013-04-13 11:57:31 (UTC+8)
    摘要: 本研究針對蒸汽腔體多孔均溫板以實驗方法探討均溫性與升降溫速率，並與無孔洞蒸汽腔體均溫板和鋁質多孔均溫板相互比較。銅質之蒸汽腔體多孔均溫板尺寸為112 × 75 × 17.2mm，上端製作96個直徑5mm，深度10mm孔洞；下端放置六片致冷晶片進行加熱或降溫，每片功率為56W，面積30 × 30mm。升溫過程中由25°C至90°C以強制對流搭配致冷晶片或無搭配進行降溫至25°C，進行量測並探討其升降溫速率與均溫性，並比較有無搭配使用致冷晶片降溫之差異性。實驗結果顯示鋁質多孔均溫板具有較佳升降溫速率，蒸汽腔體均溫板與蒸汽腔體多孔均溫板具較佳均溫性，鋁質多孔均溫板均溫性較差。而搭配致冷晶片進行降溫，可增加降溫速率，但不影響各均溫板降溫速率與均溫性。以蒸氣腔體多孔均溫板進行升降溫循環測試，其穩定性佳，適合應用於需要穩定並快速控制升降溫及均溫性的製程，如聚合酶鏈鎖反應。
    Experimental investigations are performed on multi-well vapor chamber heat spreaders to study their temperature uniformity and heating rate. Vapor chamber heat spreader (112×75×17.2mm) with 96 wells (diameter of the wells is 5mm and depth is 10mm) is made of copper. A vapor chamber heat spreader without wells and an aluminum heat spreader with multi-well are also made for comparison. Six thermoelectric coolers (TEC) each with a power of 56W and an area of 30×30mm are applied evenly to the spreaders. Seven thermocouples measure temperatures on the heat spreaders from 25℃ to 90℃ at a heating power of 336W, and from 90℃ to 25℃ under forced convection cooling condition. With and without TEC cooling are also compared in the experiment.
    Temperature uniformity is evaluated by the temperature difference and the standard deviation. Vapor chamber heat spreader has the better temperature uniformity than aluminum heat spreader due to a higher thermal conductivity. Aluminum heat spreader show the higher heating rate, followed by Vapor chamber heat spreader with wells, vapor chamber heat spreader without wells due to a larger heat capacity, heat up the slowest.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML264检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈