淡江大學機構典藏:Item 987654321/88025
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3936823      在线人数 : 837
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88025


    题名: 磨粒流噴射加工脆性材料之研究
    其它题名: Investigation of awj(abrasive-water-jet) machining of brittle materials
    作者: 紀厚任;Chi, Hou-Jen
    贡献者: 淡江大學機械與機電工程學系碩士班
    趙崇禮;Chao, Choung-Lii
    关键词: 磨料噴射加工;化學剛化玻璃;碳化鎢;雷射搭配磨料噴射之混合切割法;Abrasive-Water-Jet(AWJ);Chemically Toughened Cover Glasses;WC;Novel Laser/AWJ Hybrid Dicing Process
    日期: 2012
    上传时间: 2013-04-13 11:57:18 (UTC+8)
    摘要: 磨粒流噴射能有效的加工鋼、鈦合金、複合材料和陶瓷材料等難加工的材料。在高加工角度(90到45度)的磨料噴射加工中，所應用的領域有切割、劃線及鑽孔。另外運用在微切削、拋光和清除上，則是利用到小加工角度(0到45度)的磨料噴射。本研究的主旨在探討利用磨料噴射切割化學剛化玻璃以及精密研磨拋光碳化鎢材的可行性。本論文利用各種粒徑的氧化鋁粉及碳化矽粉做為加工磨料，台灣康寧顯示玻璃股份有限公司所提供的化學剛化玻璃及不同鈷含量之碳化鎢則為加工試驗材料。研究結果顯示，由於碳化鎢及鈷的移除速率不同，鈷含量高(18%)比鈷含量低(0到3%)之精密研磨碳化鎢材，較難改善其表面粗糙度。由於碳化矽磨料有較高的硬度值，可以比氧化鋁磨料得到更好的材料移除率。至於磨料噴射切割的過程中，本論文提出了一種新的雷射搭配磨料噴射之混合切割法，此加工法是利用雷射穿透剛化玻璃的剛化層以及利用磨料噴射完成剩餘的切割加工，本研究驗證了此加工法的可行性。
    Water abrasive jet (WAJ) is regarded as one of the very effective ways of machining difficult-to-machine materials such as steel, titanium alloys, composite and ceramic materials. Its applications can range from cutting/dicing/drilling when applying the AWJ with a high impact angle to micro-cutting/polishing/cleaning where the impact angle is kept very low. This research aimed to study the feasibility of using AWJ to cut the chemically toughened cover glasses and to polish the precision ground tungsten carbide (WC) materials. Alumina (Al2O3) and silicon carbide (SiC) particles of various sizes were used as the abrasives. Chemically toughened Gorilla (Corning) glass and WC of different cobalt concentrations were the tested materials. It is founded that, owing to the different removal rate between Co and WC, surface roughness of precision ground WC specimen of high Co concentration (18%) is more difficult to be improved than those of lower Co concentration (0~3%). SiC abrasives, having the higher hardness value, can achieve better material removal than Al2O3. As to the AWJ dicing process, a novel laser/AWJ hybrid dicing process where using laser to penetrate the toughened layer and AWJ to finish the dicing process was proposed and verified in this study.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML170检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈