淡江大學機構典藏:Item 987654321/88013
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4018594      在线人数 : 1034
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/88013


    题名: 微加工用小尺寸鑽石砂輪之研製
    其它题名: Study on fabrication of small diamond wheels for micro-grinding applications
    作者: 邱柏翔;Chiu, Po-Hsianf
    贡献者: 淡江大學機械與機電工程學系碩士班
    趙崇禮;Chao, Choung-Lii
    关键词: 玻璃模造;磨削加工;碳化鎢;UV固化樹脂;洋蔥式Curing;GMP;grinding;tungsten carbide;UV curing resin;onion-type curing
    日期: 2012
    上传时间: 2013-04-13 11:56:44 (UTC+8)
    摘要: 由於光電產業的蓬勃發展，各種精密的光學元件趨於輕薄短小，各界紛紛開發新的加工技術，及改善現有的方法，並有效率的生產相關的組件。在近幾年中，玻璃模造是生產精密光學元件的方法之一，而模具的加工是玻璃模造技術的關鍵要素，通常模具使用硬脆材料製造而成，如碳化鎢(WC)和碳化矽(SiC)等，而模具的加工方式主要以精密鑽石磨削為主。由於光學元件的尺寸變小，因此微磨削加工所使用的工具也勢必得微小化，這將造成工具之取得不易，不但耗時且成本很高。
    本研究的目的是開發製造微小鑽石砂輪，並發展出一套新的洋蔥式Curing砂輪製作過程，鑽石砂輪在經過修整後的直徑約可達到0.8～1mm。經過磨削實驗的結果，碳化鎢的Ra可以達到32nm，實驗結果證明，洋蔥式Curing的作法不但能克服UV光穿透的限制，層與層的包覆也非常好，因此利用UV樹脂製作棒狀微小鑽石砂輪是可行的。
    As the demand for precision optical components with sub-millimeter feature size steadily increasing, numerous efforts have been made in developing new techniques and in improving the existing approaches to efficiently and economically produce those components. Glass molding process (GMP) is one of these methods to enable mass production of precision glass optical components in recent years. One of the key issues in GMP is precision mold fabrication. Since the mold are normally made of hard and brittle materials such as tungsten carbide (WC) and silicon carbide (SiC), precision diamond grinding is by far the leading choice used to machine the GMP mold. As the feature size of optical component gets smaller, the size of mold and grinding wheel used to fabricate the mold gets smaller too. This makes getting one of those “micro diamond wheel” a time consuming and very expensive task.
    This research aimed to develop a effective way of fabricating small diamond wheel. UV curing polymers were used as bond materials for diamond particles of various sizes. Diamond wheels of around 0.8~1mm in diameter after truing were successfully produced. A surface roughness of 32nm Ra was achieved during preliminary diamond grinding tests of WC materials using the fabricated diamond wheel.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML241检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈