English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62796/95837 (66%)
造访人次 : 3642060      在线人数 : 472
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/87502


    题名: M2銅釘熱熔製程參數最佳化研究
    其它题名: The study of optimal process parameters for M2 hot-melt copper nails
    作者: 康博文;Kang, Po-Wen
    贡献者: 淡江大學管理科學學系企業經營碩士在職專班
    李旭華;Lee, Hsu-Hua
    关键词: 六標準差;DMAIC;six sigma management
    日期: 2012
    上传时间: 2013-04-13 11:16:51 (UTC+8)
    摘要: 3C產品日漸輕薄短小,傳統13”~15”NB常使用的銅釘皆是使用M2.5及M3,但在7”~10”的小筆電因機構結構關係無法使用上述銅釘規格,目前小筆電所採用之銅釘為M2。
    本研究計畫將利用六標準差的思維模式在熱熔銅釘製程找出最佳參數以確保所有塑膠柱的銅釘拉力能滿足研發人員設計需求之規格。
    本研究先以DMAIC手法找出製程中的問題點,並依據各製程中所會產生的問題點以要因分析(魚骨圖)及Top-Down的方式將流程展開。
    The nut for 13”~15” NB is traditionally used with M2.5 and M3 since 3C products tend to be thin and small size. However, the specification mentioned above can not be applied to7”~10” small NB due to the consideration of mechanical structure , hence the Nut M2 is used.
    In this research , six sigma management is used in hot melting Nut process to obtain the optimal parameters in order to satisfy RD design specification of all pull strength of Nut. The approach of DMAIC can be used to define the problem of the process , measure and analyze the causes, and the improve and control the key process factors.
    The processes are also developed using the Top-Down way
    显示于类别:[管理科學學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML840检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈