淡江大學機構典藏:Item 987654321/85641
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 56829/90534 (63%)
造訪人次 : 12271444      線上人數 : 83
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/85641


    題名: 風扇流中矩形板渦流產生器對流場結構及熱傳特性探討
    其他題名: Flow Structures and Heat Transfer Characteristics in Fan Flows with Rectangular-Plate Turbulators
    作者: 陳彥宏;Chen, Yen-Hung;陳增源;Chen, T. Y.
    貢獻者: 淡江大學航空太空工程學系
    關鍵詞: 風扇流;擾動器;渦流;擾動動能;熱傳;Fan flow;Turbulator;Vorticity;Turbulent kinetic energy;Heat transfer
    日期: 2002-12
    上傳時間: 2013-04-09 11:48:58 (UTC+8)
    摘要: 本研究實驗探討風扇流中,分別置於一管道頂部及底部之矩形板渦流產生器對流場結構及熱傳特性之影響擋板所產生的效應,並探討流場結構及熱傳特性之關聯。矩形板渦流產生器與管道之高度比為0.429。沿著測試管道底部安裝八塊加熱板,並以LDV量測管道斷面及靠近加熱板面三軸方向的平均速度及擾動速度,並藉以獲得壁面邊界層之軸向渦流、擾動動能、平均速度。而加熱板面之溫度由熱電偶絲量測,藉以獲得其Stanton numbers。實驗結果顯示在風扇流中加裝擋板會增加其熱傳效益並且增加在壁面的軸向渦流、擾動動能及軸向平均速度。矩形板渦流產生器裝於底部時,其熱傳增益主要來自於其次要流(軸向渦流),而裝於底部時,其熱傳增益主要來自於熱對流結果(軸向速度)。
    The flow structures and heat transfer characteristics in fan flows without and with a 90 degree rectangular-plate turbulator mounted, separately, on the bottom and top walls of a duct were experimentally investigated. The plate to duct height ratio was fixed at 0.429. Eight heated plates, placed along the bottom wall of the duct, were used as the heat transfer surfaces. The studies included three-component mean and fluctuating velocity measurements at duct cross-sections and near the heat transfer surfaces using laser Doppler velocimetry. The near-wall axial vorticities, turbulent kinetic energy and axial mean velocities were obtained from the measured velocity data. The temperatures on the heat transfer surfaces were measured using thermocouples to obtain the Stanton numbers. Results show that both the top-wall and bottom-wall rectangular-plate turbulators in fan flows have the effect to augment the heat transfer and to cause increases in the near-wall axial vorticity, turbulent kinetic energy and averaged axial mean velocity. The strength of the secondary flow (axial vorticity) and the convective effect (axial mean velocity) are the main fluid dynamic factors affecting the heat transfer distribution for the fan flows across the bottom- wall and top-wall rectangular-plate turbulators, respectively.
    關聯: 中華民國力學學會第二十六屆年會暨全國力學會議論文集,12頁
    顯示於類別:[航空太空工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    風扇流中矩形板渦流產生器對流場結構及熱傳特性探討_中文摘要.docx摘要14KbMicrosoft Word167檢視/開啟
    風扇流中矩形板渦流產生器對流場結構及熱傳特性探討_西文摘要.docx摘要14KbMicrosoft Word78檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋