淡江大學機構典藏:Item 987654321/85601
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3887319      線上人數 : 493
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/85601


    題名: 利用Cu2+/HSO3-氧化還原系統合成PMMA乳膠顆粒及其熱裂解研究
    作者: 邱作沛;林達鎔;董崇民
    貢獻者: 淡江大學化學工程與材料工程學系
    關鍵詞: 氧化還原起始劑;聚甲基丙烯酸甲酯;裂解活化能;無乳化劑乳化聚合;Redox initiator;Poly(methyl methacrylate);Apparent activity energy;Soapless emulsion polymerization
    日期: 2007
    上傳時間: 2013-04-09 11:46:13 (UTC+8)
    摘要: 本研究利用無乳化劑乳化聚合的方式,以不同濃度的Cu2+/HSO3-氧化還原系統作為起始劑合成聚甲基丙烯酸甲酯(PMMA)乳膠顆粒,計算單體轉化率、乳膠顆粒大小和Zeta電位及其熱性質。實驗結果發現不同起始劑濃度合成出的PMMA的轉化率皆可達90%以上,Zeta電位皆小於-30mV,表示乳液的穩定性佳。以SEM觀察乳膠顆粒的形態,結果顯示乳膠顆粒大小均一分佈,粒徑大小隨起始劑濃度增加而變大,此趨勢與光散射儀的結果一致。雖然改變起始劑濃度,PMMA乳膠顆粒仍有幾乎相同的玻璃轉移溫度(124~126℃)。PMMA乳膠顆粒的TGA曲線圖顯示二階段式的裂解行為,第一階段屬不飽和末端基團PMMA-CH=CH2的熱裂解,第二階段屬飽和末端基團PMMA-H的熱裂解。隨著起始劑中銅離子濃度增加,可衍生較多的不飽和末端結尾PMMA-CH=CH2,以致於在第一階段形成較多的熱重損失。利用Ozawa法計算,可獲得二階段的裂解活化能,隨著飽和末端基團PMMA-H越多,第二段裂解活化能(Ea2)越高。
    In this study, poly(methyl methacrylate) latex was synthesized in an emulsifier-free emulsion polymerization using a Cu2+/HSO3-redox initiator system. In addition to the monomer conversion, particle size, zeta potential, and thermal properties of polymer latex were also investigated under different concentrations of redox initiator. The experimental results showed that the monomer conversion reached above 90% for all systems. Zeta potential was all negative and magnitude was greater than 30mV, which showed the stability of PMMA emulsion. The morphology of the latex observed by FESEM revealed an uniform particle size and the average particle size decreased with increasing the concentration of redox initiator. PMMA latexes have almost the same Tg, 124~126 .degree.C, regardless of the concentration of redox initiator. The TGA curves of PMMA latex showed two stages of thermal degradation, which were caused by the degradation of unsaturated end group (PMMA-CH=CH2) and saturated end group (PMMA-H), respectively. The higher the concentration of Cu2+ ion, the more the proportion of PMMA-CH=CH2 in product, and in turn giving more weight loss in the first-stage degradation. The apparent activation energies of two stages were estimated by Ozawa's method. As the saturated end group (PMMA-H) increased, the apparent activation energy in the second-stage (Ea2) is raised.
    關聯: 2007高分子聯合會議論文集=Proceedings of 2007 Annual Polymer Conference,4頁
    顯示於類別:[化學工程與材料工程學系暨研究所] 會議論文

    文件中的檔案:

    沒有與此文件相關的檔案.

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋