1.  圓弧碎形加工路徑應用於研光機之研究

劉偉均; 陳炤彰 ,  1999
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 劉偉均 陳炤彰 圓弧碎形加工路徑應用於研光機之研究 Research of Arc-Fractal Tool Path on Lapping Machines 研磨機;圓弧碎形加工路徑;磨粒加工;晶圓;電腦數值控制;Lapping machine;Arc

2.  高性能感應馬達驅動系統之研製-子計劃五:感應馬達最佳效率控制(III)

楊勝明 ,  2001
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
factor as its main control variable for vector controlled induction motor drives. It was found in the first year's research that the power factor

3.  開關式磁阻馬達之設計、驅動、控制改善及前瞻技術開發-子計畫五-開關式磁阻馬達無軸承控制研究

楊勝明 ,  2005
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
the pole currents are controlled independently. In this research, a radial force control scheme which use one or two phase sinusoidal excitations for 12/8

4.  開關式磁阻馬達設計、驅動、控制及應用-子計畫五：開關式磁阻馬達之徑向力控制(II)

楊勝明 ,  2003
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
Reluctance Machines”, IEEE. Trans. on Magnetics, vol. 36, Jan. 2000, pp. 330-338. [3] C. Michioka, T. Sakamoto, O. Ichikawa, A. Chiba, and T. Fukao

5.  開關式磁阻馬達之設計、驅動、控制改善及前瞻技術開發-子計畫六-開關式磁阻馬達無軸承控制研究

楊勝明 ,  2004
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
into rotational torque and radial force components. It has been found in the previous research that the motor torque and radial force can be manipulated via

6.  高性能感應馬達驅動系統之研製-子計劃V：感應馬達最佳效率控制(I)

楊勝明 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
, 1988, pp342-348. [9] F. Blaabjerg and J.K. Pedersen, "An Integrated High Power factor Three- Phase AC-DC-AC Converter for Ac- Machines

7.  淡江大學貴重儀器共同使用服務計畫

楊龍杰 ,  2007
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
resonance (NMR), physical property measurement system (PPMS), field-emission scanning electron microscope (FESEM) and nano/micro machining machines