1.  圓弧碎形加工路徑應用於研光機之研究

劉偉均; 陳炤彰 ,  1999
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 劉偉均 陳炤彰 圓弧碎形加工路徑應用於研光機之研究 Research of Arc-Fractal Tool Path on Lapping Machines 研磨機;圓弧碎形加工路徑;磨粒加工;晶圓;電腦數值控制;Lapping machine;Arc

2.  平面研光加工路徑與應用研究

劉偉均; 陳炤彰 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 劉偉均 陳炤彰 平面研光加工路徑與應用研究 Research of Flat Lapping Paths and Applications 研光;研光機;碎形路徑;化學機械拋光;Lapping;Lapping machine;Fractal toolpath

3.  平面研光加工路徑與應用研究(II)

劉偉均; 陳炤彰 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 劉偉均 陳炤彰 平面研光加工路徑與應用研究(II) Research of Flat Lapping Paths and Applications(II) 2000 行政院國家科學委員會 https://tkuir.lib.tku.edu.tw/dspace

4.  機械手臂輔助曲面工件研磨與拋光

王銀添 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
finishing system for polishing free-form surfaces of dies specimens. Two types of tool path, zigzag and fractal, are used in this research for comparison

5.  自動拋光系統之研發-子計畫II：自動拋光系統中碎形拋光路徑與三維表面形貌之研究(III)

陳炤彰 ,  1999
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
Mandelboit,Fractal Geometry of Nature,1970 2. Jorden J. Cox,and et. cl. ,“Space-filling curves in tool-path applications“, Computer-Aided Design

6.  曲面模具拋光加工與線上量測整合之研究

陳炤彰; 楊智旭 ,  1996
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程學系 陳炤彰 楊智旭 曲面模具拋光加工與線上量測整合之研究 Research on the Integration of In-Process Inspection and Sculptured Surface Mold Finishing Processes 拋光加工;模

7.  具備全景式視覺系統之行動機器人群隊的研究

王銀添 ,  2002
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
control. This research investigates the problems including self-localization and contour control, and the issue of action selection and path planning

8.  模具自動拋光機的夾持系統之研製與控制

劉昭華; 王銀添 ,  1996
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
;碎形路徑;Grinding;Contact stress;Robot control;Fractal path 1996 行政院國家科學委員會 https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/7367

9.  LCD模組正面組裝機研發

楊智旭 ,  2002
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 楊智旭 LCD模組正面組裝機研發 Research and Development of the LCD Module Assembly Machine 2002 行政院國家科學委員會 https://tkuir.lib.tku.edu.tw/dspace

10.  微冷卻器之整合研究

康尚文; 杜文謙; 楊龍杰 ,  2000
[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Research Paper
淡江大學機械與機電工程研究所 康尚文 杜文謙 楊龍杰 微冷卻器之整合研究 Integrated Research on Micro Coolers 微流道;微熱管;體型微細加工;靜電鍵合;擴散接合;Microchannel;Micro heat pipe;Bulk micromachining