76.  平板式薄膜模組作為熱與物質併合交換器之研究

許泰翔; Shue, Tay-shyang ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Raman, R., S. Mantell, J. Davidson, C. Wu and G. Jorgensen, “A review of polymer materials for solar water heating systems,” J. Sol. Energ. Eng

77.  以溶膠-凝膠法合成中空奈米二氧化矽球狀粒子及其混成塗膜的製備

鄭喬予; Zheng, Chiao-Yu ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
transparent nanocomposite thin films and thicker coatings on PMMA substrates by means of spin coating and doctor-blade coating, respectively. The prepared

78.  聚(3-羥基丁酯)的裂解反應研究及其共聚物的合成

廖國華; Liao, Kuo-Hua ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
。總體結晶速率則藉由Avrami關係式求得，k1/n與1/t0.5值隨著PLA摻合比例逐漸下降，表示PLA的添加會降低PHB高分子鏈的移動性。 Because polymeric materials have excellent plasticity, properties and low

79.  使用旋轉盤微過濾分離微藻懸浮液

林炫君; Lin, Syuan-Jyun ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
the shear force. Measuring the functional groups of the materials in the filter cake using Fourier transform infrared spectroscopy indicates

80.  以六氯化鎢為起始物製備鉑三氧化鎢甲醇氧化電催化劑與其性質分析

王志仲; Wang, Chih-Chung ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials for the direct methanol fuel cell”, Lasch, K.; Hayn, G.; Jorissen, L..; Garche, J.; besenhardt, O.; J. Power Sources 2002, 105, 305-310. [35

81.  聚乳酸/氮化鋁導熱高分子複材之製備與性質研究

鄧佳宜; Teng, Chia-I ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
was analyzed by tensile test, impact test, DSC, SEM and thermal conductivity. We found poly(lactic acid) is a hard and brittle materials form tensile test

82.  藉由與銀複合來提升ZnO的光催化能力

錢東緯; Qian, Dong-Wei ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
solvothermal synthesis of condensed inorganic materials,” Chem. Soc. Rev., 31, 230-238 (2002) 7. D. J. Watson, C. A. Randall, “Hydrothermal formation

83.  光熱雙硬化型環氧丙烯酸酯樹脂-二氧化矽複合材料製備及其性質研究

蘇宇傑; Su, Yu-Chieh ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Materials Science and Engineering A. 528 (2011) 6769-6775. [47] F. Piscitelli, A.M. Scamardella, V. Romeo, M. Lavorgna, G. Barra, E. Amendola, J Appl

84.  製備多孔性氮化鎵微米柱結構並利用機械式剝離技術製作高功率垂直式發光二極體之研究

侯翔彬; Hou, Hsiang-Pin ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
thin films with dissimilar substrate materials by Pd-In metal bonding and laser liftoff," J. Electron. Mater., 28, p. 1409, 1999. [24] C. F. Chu, et al

85.  製備鉑-二氧化鈰碳甲醇氧化電催化劑與其性質分析

李盈層; Li, Ying-Tseng ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
nanoparticles and CeO2 on the carbon black (CB), then get the Pt-CeO2/C nanocomposite electrocatalysts. Scanning electron microscopic (SEM) images

86.  利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究

洪笠尊; Hong, Li-Tzuen ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 賴偉淇 洪笠尊 Hong, Li-Tzuen 利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究 The structures and properties of nanosilica materials prepared via reverse

87.  改良式太陽能驅動氣隔式薄膜蒸餾海水淡化系統之經濟評估

宋振銓; Song, Chen-Chuan ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, S.B.; Guddad, M.. “Reverse Osmosis andMembrane Distillation for Desalination of Groundwater: A Review”, ISRN Materials Science, 2011. [2] Paul R

88.  多模穴幾何變化與操作條件整合效應對共射成型核心層分佈之影響

陳冠豪; Chen, Kuan-Hao ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
系統，其影響效應非常大，僅透過調整成型參數來改善核心層材料(core materials)之分佈情形之效果並不明顯，故本研究以探討模穴幾何變異為主，成型參數改變為輔，對於產品良率不佳之問題進行優化與改善。明確而言，本研究利用Moldex3D R14模流分析軟體進行分離式不平衡多模穴系統，探索發現此系

89.  煆燒氣氛對檸檬酸鹽先驅物衍生LaAlO3 成相溫度的影響

郭于嫚; Kuo, Yu-man ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, “Evaluation of Sr- and Mn-substituted LaAlO3 as potential SOFC anode materials.” Solid State Ionics., 177 1059-1069 (2006). 32. D. Zhou, G. Huang, X. Chen

90.  Effects of ph and calcination temperatures on the formation of citrate-derived hexagonal barium ferrite

劉佩琪; Liu, Pei-chi ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Society for Testing and Materials. 52. Cullity BD, introduction to Magnetic Materials. Addison-Wesley Pub. Co.;1972.p.198-200. 53. Stoner EC, Wohlfarth

91.  改質奈米二氧化矽/高分子複合材料之製備與物性分析

歐陽岱岳; Oyang, Tai-yueh ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials 奈米二氧化矽;奈米粒子表面改質;溶膠凝膠程序;有機無機混成;nano-silica;surface modified of nano-silica;ol-gel process;organic-inorganic hybrid 本研究是經由溶膠凝膠製程，將四乙氧基矽烷(TEOS)先行水解、縮

92.  P/Si莫爾比對P/Si-TiO2光觸媒相穩定與光催化性質的影響

楊士德; Yang, Shih-te ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
as a catalyst to control the structuresof mesoporous titanium dioxide materials” Microporous and Mesoporous Mater 84,27-33(2005). 29.I.H.

93.  含鎢氧化物光致變色高分子混成薄膜之製備及其性質分析

陳志維; Chen, Chih-wei ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
photochromic materials and had excellent potential in heat insulation applications. 2008 1.王品然，王正全；工業材料，2004，119-127 2醫護服務業安全健康通訊，2002，1-6 3張仕欣，李文錦，張光偉；工業材料

94.  丁基乳膠奈米黏土複合材料之製備與物性探討

趙之晟; Chao, Chiz-cheng ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of Advanced Materials 2001; 2: 449-454 [27] y. lkeda, s. kohjiya Chem. Research Japan 1996 [28] K.E. Strawhecker, E. Manias, Chem. Mater. 2000; 12

95.  聚乙烯/聚丙烯/碳黑摻雜型導電高分子之製備與性質研究

吳建宏; Wu, Chien-hung ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. K. Sara, “Application of frequency sensitive sufaces in electromagnetic shielding”, Journal of Materials Processing Technology, Vol. 54

96.  光致變色金屬氧化物 : 高分子混成薄膜之製備及其近紅外線吸收性質分析

蕭佩芸; Hsiao, Pei-yun ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
29.Tao He and Jiannian Yao , Journal of Materials Chemistry , J. Mater. Chem., 2007, 17, 4547-4557 30.Xu N, SunM, Cao YW, et al. Influence of pH

97.  聚亞醯胺-奈米金複合光學薄膜之製備及其微影製程技術

劉育憲; LIU, YU-SHIEN ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
/titania-silica hybrid materials” Mater. Sci. Eng. C 22 (2002) 61-65. [13] Z. M. Liang, J, Yin, J. H. Wu, Z. X. Qiu, F. F. He, “Polyimide

98.  以改進式共沉澱法製備硬磁性鐵酸鋇

朱婉婷; Chu, Wan-Ting ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials were used: an aqueous solution of ferric and barium nitrates, in a stoichiometric ratio to form BaFe12O19, as starting solution, ammonium

99.  太陽能驅動不同薄膜蒸餾模組海水淡化系統之成本與操作度比較

洪浩嘉; Hung, Hao-Chia ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, B.L.; Sane, M.G.; Parjane, S.B.; Guddad, M.. “Reverse Osmosis andMembrane Distillation for Desalination of Groundwater: A Review”, ISRN Materials

100.  使用掃流微過濾結合活性碳吸附在海水淡化前處理中去除微生物與有機物質

林筠喬; Lin, Yun-Chiao ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
with activated carbon adsorption for removal of microbes and organic materials in the pretreatment of seawater desalination 掃流微過濾;海水淡化前處理;活性碳;吸附;cross-flow

101.  以靜電力場輔助電鍍法製備具微米構形電致色變薄膜及其性質之研究

廖禮君; Liao, Li-Chun ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
.; Cheng, J.; Goodenough, J.B. “Prussian blue: a new framework of electrode materials for sodium batteries”,Chem. Commun.2012,48, 6544. 25.Kashiwazaki, N

102.  聚(氮-異丙基丙烯醯胺-乙烯胺-氮-異丙基丙烯醯胺)嵌段共聚物之合成與其環境應答性質

楊祖愷; Yang, Tsu-Kai ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of Biomedical Materials Research, 2000. 52(4): p. 577-586. 20. Gao, X., Cao, Y., Song, X., Zhang, Z., Xiao, C., He, C., and Chen, X., pH-and thermo-responsive

103.  粒徑與流體黏度對微過濾特性之影響

林宥良; Lin, Iou-liang ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Green, “The Role of Porosity in Filtration VX: Skin Effect with Highly Compressible Materials”, A.I.Ch.E. J., 19, 1266 (1973). Wakeman, R

104.  氯化銅對PVDF以氯化亞銅催化原子轉移自由基聚合接枝PMMA的反應之影響

古訓銀; Gu, Shun-yin ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. 10(12), 901. 6. K. Matyjaszewski and J. Pyun, Chemistry of Materials, 2001, 13(10), 3436. 7. T. Otsu and M. Yoshida, Makromol. Chem. Rapid. Commun

105.  綠色化學之設計與整合 : 個案研究

張創堯; Chang, Chuang-yao ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
-carbonylation) as raw materials to produce Carbaryl and dimethyl carbonate are excellent reaction path. In the second case study of DMC, we also use pinch

106.  感光性有機-無機奈米複合材料的製備與其於光學鍍膜之應用

黃逢璽; Huang, Feng-hsi ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of direct dye grafted onto the silica surface is better than blend. The modified dye-g-silica hybrid materials are added into optical coating to prevent

107.  用水旋風分離器分離酵母菌懸浮液之分離性能

黃敏哲; Hwang, Min-Jhe ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, that is quite short. The order of the particle mean diameter with those materials are：grass particle> activated sludge> yeast powder, therefore

108.  中空二氧化矽奈米粒子表面改質及其在塑膠基板上製作高穿透高疏水複合塗膜

王建翰; Wang, Chien-Han ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Materials, 2016. 227: p. 121-136. 13. D.Ebert, B. Bhushan, Transparent, superhydrophobic, and wear-resistant coatings on glass and polymer substrates

109.  Analysis on hydrodynamics and cake formation of dynamic microfiltration with different rotating-disk designs

吳思恩; Wu, Su-En ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, J.M., Piar, G., 1996. Modeling of solid/liquid expression for cellular materials. AIChE J. 42, 2057. Lee, S.S., Burt, A., Russoti, G., Buckland, B

110.  以有機膠奈米模板合成高分子之結構與性質研究

曾珅鎮; Tseng, Shen-jhen ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
DVB濃度上升，其孔洞平均尺寸隨之下降，因此，其比表面積變化隨DVB濃度上升而上升。 We describe the preparation of nanostructured polymeric materials by polymerizing a monomer within

111.  二氧化矽/高分子防霧鍍膜之製備與性質研究

王冠中; Wang, Kuan-chung ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
coatings 抗霧鑄膜;奈米複合材料;溶膠凝膠法;熱硬化法;antifogging coatings;nano hybrid materials;Sol-gel process;heat curing 本研究製備一抗霧塗膜，以無機單體四乙氧基矽烷(TEOS)，有機偶合劑γ-乙二醇氧基丙基三甲氧矽

112.  凝膠相轉換製備PVDF薄膜及薄膜蒸餾應用

高國翔; Kao, kuo-Hsiang ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
., Materials Science and Technology, Vol. 5. "Phase Transformation in Materials", Weinheim; New York. (1991). 66. Hong, P. D.; Chou, C.M., Macromolecules, 33

113.  三氧化鎢氧化鈦光電致色變奈米複合薄膜之製備與性質研究

陳彥文; Chen, Yan-Wen ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
nanocomposite thin films and their photoelectrochromic properties 三氧化鎢;氧化鈦;複合薄膜;電致色變;光電致色變;tungsten oxide;Titanium dioxide;composite films;electrochromic

114.  新型圖樣化基板應用於氮化鎵發光二極體效率提升之研究

羅瑛蕙; Lo, Ying-Hui ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
substrates,” Materials Science and Engineering B, vol.122, pp.184-187 (2005) [28] D.S. Wuu, W.K. Wang, W.C. Shih, R.H. Horng, C.E. Lee, W.Y. Lin, J.S.

115.  由幾丁聚醣奈米金桿複合材料製備光控制藥物釋放奈米載體

鄭昕宜; Cheng, Shin-Yi ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
delivery. Biomedical Materials. 2009, 4. 7.Ashammakhi, N.; Reis, R.; Chiellini, E. Topics in Tissue Engineering, Vol.3, Chap.6, 2007. 8.Benoit, D. S. W

116.  乾濕兩式生質酒精重組程序之製程研究

簡振宇; Chien, Chen-Yu ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
as the feeding materials, we are able to make syngas out of the reforming reaction; then, we employ the “one-step process” to accomplish the making

117.  塑膠光學鏡片射出成型之流變學分析

郭廷偉; Kuo, Ting-Wei ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
) and (cyclic olefin polymer)(COP) were selected as the sample materials. The material parameters in three constitutive equations such as White-Metzner, Phan

118.  雙硬化型環氧甲基丙烯酸酯複合材料之製備與抗腐蝕性質測試

連思瑀; Lien, Ssu-Yu ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
unzipping of graphitic materials. Phys Rev Lett 2006;96. [23] Dreyer DR, Park S, Bielawski CW, Ruoff RS. The chemistry of graphene oxide. Chem Soc

119.  氧化鋅/二氧化鈦光觸媒之製備與性質探討

許晉榮; Hsu, Chin-jung ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, S. Ike- da and B. Ohtani, J. Phys. Chem. B,2002,106,637-645. 36. 汪建民,”材料分析,Materials Analysis ”,1998。 37. 陳秀連“以化學法製備均一粒徑氧化鋅粉體與發光特性之研 究”碩士論文，國

120.  水性聚胺基甲酸酯-奈米金奈米複合材料之製備與性質分析

翁仲慶; Wong, Chung-ching ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
SCIENCE 1997, 279. 30. G.Carotemuto, L. N. journal of materials chemistry 2003 31. Lee, B. S.; Chun, B. C.; Chung, Y. -.; Sul, K. I.; Cho, J. W

121.  含顏料或奈米二氧化矽之紫外光硬化型或是溼氣硬化型PU樹脂製備和塗裝應用

徐為宬; Hsu, Wei-chen ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Materials, 2, 114 (1999) 18. 黃景忠，紫外光硬化型PU / 二氧化矽奈米複合材料於表面塗裝 之應用，淡江大學碩士論文，2007 19. 張豐志 編著，應用高分子手冊；五南出版社，2003 20. J. Szmuszkovicz, M. P. Kane, L. G

122.  銅在磷酸溶液中之電化學平坦化機制

戴振家; Tai, Chen-chia ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for VLSI Applications in 1990, eds., G. C. Smith and R. Blumenthal, MRS, Pittsburgh, 179 (1991). Murarka, S. P., Materials Science and Engineering, 87

123.  凝膠衍生穩定化氧化鋯之製備與特性分析

李柏澍; Li, Po-shu ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. “Solid Oxide Fuel Cell Materials“ Fuel Cell Catalyst Vol . 2, No. 3, Spring 2002. 8. 汪建民主編, “陶瓷技術手冊,” 中華民國產業技術發展協會, 中華民國粉末冶金協會出版, 1994. 9. I

124.  利用熱與物質併合交換器之蒸餾塔

潘保儒; Penn, Pao-ru ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and Advanced Materials, University of Newcastle Upon Tyne, UK, 2003. Zarkadas, D. M. and K. K. Sirkar, “Polymeric Hollow Fiber Heat Exchangers

125.  以有機膠奈米模板合成PS/PMMA共聚物之結構與性質研究

趙禹昇; Chao, Yu-sheng ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
到奈米細纖維被去除的痕跡。 This research focus on preparation of nanostructured polymeric materials by polymerization at monomers within a scaffold composed